• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1996년도 학술발표회 논문집
• /
• pp.611-616
• /
• 1996

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.117-123
• /
• 2003

This paper deals with pressure ripple and noise reduction characteristics for a hydrostatic transmission(HST) consisting of a variable axial piston pump connected in an open loop to a fixed displacement axial piston motor. Pressure ripples in HST is major source of vibration, which can lead to fatigue failure of components and cause noise. In order to reduce the pressure ripple, an annular tube type hydraulic filter proposes to absorb pressure ripples with the high frequencies components to achieve better noise attenuation in HST. The basic principle tube is applied to propagation of pressure wave, reflection, absorption in cross section of discontinuity and resonance in the hydraulic pipeline. It is experimently confirmed that a hydraulic filter is absorbed to be about 30∼40dB of pressure ripple with high frequencies. These results will assist in modeling and design of noise reduction in hydraulic control systems, and here, should provide a means of designing a quieter HST.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.1-11
• /
• 2002

Flow of fluid has been studied in various fields of fluid engineering. To hydraulic engineers, the unsteady flow such as pulsation and liquid hammering in pipes has been considered as a serious trouble. So we are supposed to approach the formalized mathematical model by using more exact momentum equation for fluid transmission lines. Most of recent studies fur pipe line have been studied without considerations of variation of viscosity and temperature, which are the main factors of pressure loss causing the friction of fluid inside pipe line. Frequency response experiments are carried out with use of a rotary sinusoidal flow generator to investigate wave equation take into account viscosity and temperature. But we observed that measured value of gains are reduced as temperature increased. And it was respectively observed that the measured value of gains are reduced and line width of gain is broadened out, when temperature was high in the same condition. As we confessed, pressure loss and phase delay are closely related with the length, diameter and temperature of pipe line. In addition, they are the most important factors, when we decide the momentum energy of working fluid.

• 상하수도학회지
• /
• 제13권1호
• /
• pp.95-112
• /
• 1999

In this research, it is proposed that optimization method is introduced and applied to the design of pipeline system in multi-regional water supply project, which has been constructed to settle the regional unbalance problems of available water resources. For the purpose, interface programs are developed to integrate linear programming model and KYPIPE model which is used for optimization and hydraulic analysis, respectively. The developed program is applied to the pipeline system design of multi-regional water supply project. The optimal diameters from the application of linear programming technique are compared with those from conventional method that is time-consuming and tedious trail and error process. Since the conventional design largely depends upon the experience of designers and the results of general hydraulic analysis, it can not be reasonable and consistent. The application of linear programming technique can make it possible to design pipeline system optimally by using same design factors of general hydraulic models. The model can select commercial discrete pipe diameter as optimal size by using pipe length as decision variables. The developed model is applied to Pohang multi-regional water supply system design with two different objective functions, which are initial construction cost and annual cost including electric cost. As results, it is calculated that the initial construction cost of 1,449,740 thousand won is saved and annual cost of 128,951 thousand won is saved for a year within study year. Also, the optimal site of pump station is selected on 5th pipe, which is located between the diverging junction to Kangdong(2) province and the diverging junction to Cheonbuk province. It is explained that pump cost is less than pipe cost in this application case study due to little pump station scale. In the case of water supply with large pump capacity, it is reasonal that the increase of pipe size is more efficient instead the increase of pump station capacity to save annual cost.

• 한국가스학회지
• /
• 제14권6호
• /
• pp.51-56
• /
• 2010

해외 하천통과 매설배관 사고사례를 수집하여 분석하였다. 이는 국내 하천통과 도시가스매설배관의 합리적인 매설심도를 결정하기 위한 기본 자료로 활용하기 위함이다. 사고사례 조사결과 하천을 통과하는 천연가스매설배관 사고의 주요원인은 홍수로 분석되었다. 홍수에 의한 배관 노출 및 과도 유량에 의한 하중이 파손 원인인 경우가 많다. 파손발생 위치에서 부식이 발생한 것도 원인이 되었다. 따라서 국내 하천통과 매설배관의 합리적이고 효율적인 매설심도 결정을 위해서는 국내 하천특성에 맞는 하천의 수리학적 특성평가와 배관의 구조해석이 요구된다. 일반 천연가스배관의 사고사례 조사 결과도 주요 원인이 외부간섭과 부식임도 요약하였다. 이들 두 주요원인은 매설환경에 따라 전체사고에서 차지하는 비율이 차이가 있었다.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.310-319
• /
• 2016

If a spoiler was attached to the pipeline investigated in a previous study, a strong flow and vortex at the lower part caused scouring and thus an asymmetric pressure distribution, which assisted in the analysis of the self-burial structure where a down force was applied to the pipe. However, only the fluid-pipe interaction was considered, excluding the medium (seabed), when practically burying the pipeline. Thus, this study applied a numerical model (LES-WASS-2D) to directly analyze the non-linear interactions among the fluid, pipe, and seabed in order to perform numerical simulations of a pipeline with a spoiler installed on the seabed. This allowed the self-burial mechanism of a pipeline with a spoiler to be analyzed in the same context as the previous study that considered only the fluid-pipe interaction. However, when a pipeline was installed on the seabed, a strong flow and vortex were found at the front of the bottom, and a spoiler accelerated the fluid resistances. This hydraulic phenomenon will reinforce the scouring and down force on the pipeline. In the general consideration of the numerical analysis results by the specifications and arrangements of the spoiler, a pipeline with a spoiler was found to be the most effective for the self-burial function.

• 대한공간정보학회지
• /
• 제3권2호
• /
• pp.101-113
• /
• 1995

상수도 계획 시 계획에 필요한 지형 및 공간특성이 갖는 정보들의 상호 유기적인 결합과 분석의 활용 가치를 증대시키기 위하여 보다 체계적이고 합리적인 정보관리체계가 필요하며 이러한 문제해결을 위한 데이타베이스 관리시스템(Data Base Management System : DBMS) 및 의사결정 지원시스템의 구축이 불가피하다. 또한 관로상의 수리학적 특성에 관련된 통과경로는 대상경로가 갖는 지리적 특성에 큰 영향을 받으므로 수리학적 안정성과 용수공급 대상지역까지 도수 및 송수가 원활히 이루어질 수 있도록 보다 경제적인 노선의 선정방법이 요구된다. 따라서 본 연구에서는 상수도의 신규개발이나 기존시설 확장 시, 계획의 적정성이나 경제성 등을 고려하여 각종기술 및 사회적 경제적 요인을 종합적으로 분석하고 그 결과를 토대로 보다 합리적이고 효율적인 계획 대안을 제공할 수 있는 의사결정 지원시스템을 도입한 상수도 계획기법을 개발하고자 하였다. 특히 상수도 관로계획 수립은 대상지역의 지형 및 토지이용특성에 따른 영향이 지배적인 인자이며 이를 해결하기 위한 방만으로 지리정보시스템(Geographic Information System ; GIS)을 이용하여 시스템을 구성하였다. 용수공급계통계획의 주된 요인인 지형적 공간적 특성을 GIS가 지니는 각종 분석기능과 관로 수리해석 프로그램 SAPID, 경제분석 프로그램인 ECOVEL을 개발하여 결합하고, 지형적인 공간특성정보를 데이터베이스화함으로써 관로의 적정노선을 보다 합리적으로 선정할 수 있는 의사결정 지원시스템을 개발하였으며 개발시스템의 현장 적용성 평가를 실시하여 그 가능성을 검토하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.426-434
• /
• 2006

The impact of leakage was incorporated into the transfer functions of the complex head and discharge. The impedance transfer functions for the various leaking pipeline systems were also derived. Hydraulic transients could be efficiently analyzed by the developed method. The simulation of normalized pressure variation using the method of characteristics and the impulse response method shows good agreement to the condition of turbulent flow. The leak calibration could be performed by incorporation of the impulse response method with Genetic Algorithm (GA) and Harmony Search (HS). The objective functions for the leakage detection can be made using the pressure-head response at the valve, or the pressure-head or the flow response at a certain point of the pipeline located upstream from the valve. The proposed method is not constrained by the Courant number to control the numerical dissipation of the method of characteristics. The limitations associated with the discreteness of the pipeline system in the inverse transient analysis can be neglected in the proposed method.

• 에너지공학
• /
• 제26권3호
• /
• pp.90-96
• /
• 2017

지역난방 열수송관을 통해 중온수를 공급할 때 고압의 중온수로부터 열사용자 설비(지역난방 열교환기)를 보호하고 온도조절을 원활히 하고 유체의 원거리 공급을 위해 차압유량조절밸브를 통해 압력을 조절하거나 압력을 감소시키고 있다. 하지만, 고압 유체 사용에 따라 압력조절밸브에서 캐비테이션이 발생하여 잦은 고장 및 오작동을 유발하여 많은 문제가 발생하고 있으며, 사업자 및 사용자 모두에게 에너지 손실 및 민원 유발 등의 원인이 되고 있다. 이러한 문제를 해결하기 위해 연구 중인 1차측 차압유량조절밸브를 수력터빈으로 대체하여 차압에너지를 전기에너지로 변환하고, 전기를 2차측 펌프의 동력으로 활용하는 에너지 절감기술을 소개하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2024-2030
• /
• 2003

Design for a quite operation of fluid power system requires the understanding of noise and vibration characteristics of the system. This paper presents a dynamic response for design of hydraulic circuit. Experimental investigations on the attenuation characteristics of pressure ripple in automotive power steering hydraulic pipe with dynamic response of hydraulic pipe line is examined. Also, a mathematical model of hydraulic pipe is proposed to support design of the hydraulic circuit and analyze the attenuation characteristics of pressure ripples in a hydraulic pipe line. And analyze the impedance characteristics to determine the postion to construct accumulator for attenuation the pressure pulsation. The experimental results show that the pulsation attenuation characteristics of hydraulic hoses is remarkably affected by the flexible metal tube inserted coaxially inside a hydraulic hose with a finite length as well as viscoelastic properties of hose wall. It is also shown that the predicted results by the model proposed here agree well with the measured results over a wied range of frequency;