• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.351-352
• /
• 2005

• Journal of Environmental Science International
• /
• v.12 no.12
• /
• pp.1245-1254
• /
• 2003

A numerical simulation for 11 February 1996 has been done to grasp main mechanisms of the occurrence of strong downslope winds near Gangnung area. The simulation performed by using ARPS (Advanced Regional Prediction System) showed that enhanced surface winds were not related with a reflection of vertically propagating gravity waves. Froude numbers were about 1.0, 0.4 and 0.6 for the atmosphere above Daekwanryoung and above a place located 220km upstream, and above another place located 230km downstream from the Taebak mountains, respectively. This suggested that as a subcritical flow ascended the upslope side of the Taebak mountains, Froude numbers would tend to increase according to the increase in wind speed, and near the crest the flow would become supercritical and continue to accelerate as it went down the downslope side until it was adapted back to the ambient subcritical conditions in a turbulent hydraulic jump. Simulated Froude numbers corroborated the hydraulic jump nature of the strong downslope wind. In addition, the inversion was found near the mountain top height upstream of the mountains, and it was favorable for the occurrence of strong downslope winds.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.43-57
• /
• 1999

The fluid flow and heat transfer in a thin liquid film are investigated numerically. The flow Is assumed to be two-dimensional laminar and surface tension is considered. The most important characteristics of this flow is the existence of a hydraulic jump through which the flow undergoes very sharp and discontinuous change. Arbitrary Lagrangian-Eulerian(ALE) method is used to describe moving free boundary and a modified SIMPLE algorithm based on streamline upwind Petrov-Galerkin(SUPG) finite element method is used for time marching iterative solution. The numerical results obtained by solving unsteady full Navier-Stokes equations are presented for planar and radial flows subject to constant wall temperature or constant wall heat flux, and compared with available experimental data. It Is discussed systematically how the inlet Reynolds and Froude numbers and surface tension affect the formation of a hydraulic jump. In particular, the effect of temperature dependent fluid properties is also discussed.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.461-470
• /
• 2011

Abrupt and gradual levee breach analyses on the flat domain were implemented by laboratory experiments and numerical simulations. To avoid the reflective wave from the side wall the experiment was performed in a large domain surrounded by waterway. A numerical model was developed for solving the two-dimensional gradual levee breach flow. The results of the numerical simulation developed in this study showed good agreement with those of the experimental data. However, even if the numerical schemes effectively replicated the trends of the observed water depth for the first shock, there were little differences for the second shock. In addition, even though the model considered the Smagorinsky horizontal eddy viscosity, the location and height of the hydraulic jump in the numerical simulation were not fairly well agree with experimental measurements. This shows the shallow water equation solver has a limitation which does not exactly reproduce the energy dissipation from the hydraulic jump. Further study might be required, considering the energy dissipation due to the hydraulic jump or transition flow from reflective wave.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.95-95
• /
• 2019

보를 월류하는 흐름은 유량에 따라 상이한 흐름특성을 보인다. 즉, 유량이 증가함에 따라 사류 (supercritical flow), 완전도수 (complete hydraulic jump), 수중도수 (submerged hydraulic jump), 그리고 잠긴흐름 (plunge pool)으로 천이한다. 각 흐름영역에 따른 하상전단응력의 변화는 보의 물받이와 하상보호공을 설계하는데 중요하다. 본 연구에서는 계산유체동역학을 이용하여 보를 월류하는 흐름을 수치모의하여 각 흐름의 수리적 특성을 분석하였다. 이를 위하여 Flow3D를 이용하여 RANS 방정식을 수치해석 하였으며, 난류모형으로 RNG $k-{\epsilon}$ 모형을 이용하였다. 수치모의를 통하여 각각의 흐름에 대하여 평균유속, 하상전단응력, 그리고 흐름저항계수의 종방향 분포를 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.617-618
• /
• 2005

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.31.3-31.3
• /
• 2008

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1027-1028
• /
• 2005

• Water Engineering Research
• /
• v.5 no.4
• /
• pp.195-206
• /
• 2004

This paper deals with oxygen transfer by air entrainment and energy dissipations by flow characteristics at the stepped drop structure. Nappe flow occurred at low flow rates and for relatively large step height. Dominant flow features included an air pocket, a free-falling nappe impact and a subsequent hydraulic jump on the downstream step. Most energy was dissipated by nappe impact and in the downstream hydraulic jump. Skimming flow occurred at larger flow rates with formation of recirculating vortices between the main flow and the step comers. Oxygen transfer was found to be proportional to the flow velocity, the flow discharge, and the Froude number. It was more related to the flow discharge than to the Froude number. Energy dissipations in both cases of nappe flow and skimming flow were proportional to the step height and were inversely proportional to the overflow depth, and were not proportional to the step slope. The stepped drop structure was found to be efficient for water treatment associated with substantial air entrainment and for energy dissipation.

• Water for future
• /
• v.53 no.11
• /
• pp.138-145
• /
• 2020