• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.164-173
• /
• 2006

In the electro-hydraulic injector for the common rail Diesel fuel injection system, the injection nozzle is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the piezo actuator was considered as a prime movers in high pressure Diesel injector. Namely a piezo-driven Diesel injector, as a new method driven by piezoelectric energy, has been applied with a purpose to develop the analysis model of the piezo actuator to predict the dynamics characteristics of the hydraulic component(injector) by using the AMESim code. Aimed at simulating the hydraulic behavior of the piezo-driven injector, the circuit model has been developed and verified by comparison with the experimental results. As this research results, we found that the input voltage exerted on piezo stack is the dominant factor which affects on the initial needle behavior of piezo-driven injector than the hydraulic force generated by the constant injection pressure. Also we know the piezo-driven injector has more degrees of freedom in controlling the injection rate with the high pressure than a solenoid-driven injector.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.112-119
• /
• 2009

An automatic transmission of construction equipment is controlled by hydraulic and electronic system for doing in various functions like as shifting and operation. The shifting is operated by the engaged and disengaged clutch motion from hydraulic power. On the shifting process, suitable pressure control to the clutch is required for smooth shifting. Hydraulic control system in the automatic transmission is divided by the pilot control type and the direct control type greatly. The direct control type has an advantage than the pilot control type. Because the structure is simple, the design and the manufacture are having less troubles and the system can be maximized precision pressure control. However, the excellent performance proportional control valve should be used to achieve proper control-ability. In this study, the dynamic analysis model composing the automatic transmission and hydraulic system for forklift truck is presented to simulate the characteristics of hydraulic system about the direct control type. That model is verified the validity compared the results of the testing examination. Parameters of input signal are analyzed to reduce the output torque according to input control signal is affected in shifting characteristic.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.37-44
• /
• 2017

In this study, in order to prevent cavitation in a variable swash-plate type hydraulic pump, a basic model impeller has been applied to a new pump, and the impeller shape has been optimized through flow analysis. Based on the analysis results, we could propose an impeller shape with high efficiency and low possibility of cavitation in comparison with the basic model. The simplification of the basic shape of the impeller of the hydraulic pump was performed in three parts in the order of hub shape, wing, and curvature, and eight design parameters were defined to satisfy the design requirement. Compared with the initial model of the impeller, when the differential pressure of the optimum model increased, the efficiency was improved. It achieved the goal of design improvement because cavitation did not occur under the rated operating conditions.

• 지질공학
• /
• 제14권3호
• /
• pp.287-300
• /
• 2004

Visual Modflow를 이용하여 터널 굴착 시 터널 내 지하수 유입 량과 영항반경에 영향을 미치는 수리 인자들에 대한 민감도 분석을 수행하였다. 터널의 심도 및 수리전도도의 민감도가 가장 크게 나타났으며, 굴착 후 경과 시간에 따라 민감도의 순위가 달라지는 것으로 분석되었다. 비산출률의 경우 굴착 후 시간이 경과함에 따라 민감도가 지속적으로 증가하는 것으로 나타나 배수형 터널 설계 시 수리전도도와 함께 중요하게 고려되어야 할 변수인 것으로 밝혀졌다. 터널굴착 및 방수 처리 과정을 모사할 수 있는 부정류 모델링 기법을 제시하였으며, 실제 터널 설계 지역에 적용하여 굴착과정에서 발생하는 터널 내 지하수 유입량 주변 지역 지하수계의 변화를 예측하였다. 예측 모델의 결과는 모델 보정을 통하여 설정한 수리 전도도에 매우 민감하므로, 사후 모니터 링을 통한 모델 검증이 요구된다.

• 한국측량학회지
• /
• 제23권3호
• /
• pp.251-260
• /
• 2005

CCD의 개발은 사진측량에 많은 발전을 이루었다. 본 연구는 근접수치사진측량으로 수리모형 해석시 지형 보간최적분석기법에 관한 연구이다. 먼저 근접수치사진측량과 삼각수준측량으로 수리모형의 상사성을 분석하기 위해 통계분석의 일종인 T-검정을 실시하였다 그리고 수치사진측량으로 분석한 수리모형해석을 컴퓨터로 실제지형과 비슷한 형상을 가지는 수치표고모형을 만들기 위해 역거리, 크리깅, 최근린, 불규칙삼각망 보간법 중에서 수리모형 적용에 적합한 최적 보간법을 제시하였다. 수리모형에 대한 기하학적 상사분석을 위해 보간법을 적용 결과, 크리깅 보간법과 불규칙삼각망 보간법이 효율적인 것으로 판단되었다

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.135-142
• /
• 2008

Hydraulic power steering system has been adopted in seniority passenger and commercial vehicle system for an easy maneuverability and a smoother ride. In this study, hydraulic power steering system analysis model which includes hydraulics and mechanical sub-systems was developed using commercial software, AMESim in order to predict characteristics for various steering components. Each component which constructs system was modeled and verified by experimentally obtained characteristics curves of each components. The parameter sensitivity analysis such as valve opening area, torsional stiffness of torsion bar for system design are carried out by the analysis and experimental method. The predicted results by the development model were a good agreement with experimentally obtained results. The sensitivity investigation results rotary torque when changing an input shaft edge width, was most sensitive, to change in angle and slot width and supply flow of input shaft edge is not a lot sensitively.

• 산업기술연구
• /
• 제24권B호
• /
• pp.123-131
• /
• 2004

The existing of developed scour Equation have a very different value by boundary condition, hydraulic condition and bed condition. Therefore it may give rise to a serious trouble if it make a wrong application of the scour Equation. So this research of purpose is the predicting of scour depths, the method is that analysis river of feature and hydrauric feature for river in kangwondo young-seo region. And hydrauric model experiment of Scour phenomenon execute after the existing of calculate scour depths equation analysis sensitivity, assort a practical.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2012

In this study, the flow characteristic analysis at the curved-channel of the actual channel section is compared and reviewed using the 2D RMA-2 model and the 3D FLOW-3D model. the curve section with curve rate 1.044 in the research section is analyzed applying the frequency of he project flood of 100 years. According to the result, the issue for the application of the FLOW-3D Model's three-dimensional numeric analysis result to the actual river is found to be reviewed with caution. Also, application of the 3D model to the wide basin's flood characteristic is determined to be somewhat risky. But, the applicability to the hydraulic property analysis of a partial channel section and the impact analysis and forecast of hydraulic structure is presumed to be high. In addition, if the parameters to reflect the vegetation of basin and the actual channel, more accurate topological measurement data and the topological data with high closeness to the current status are provided, the result with higher reliability is considered to be drawn.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.541-546
• /
• 2014

Probabilistic Safety Assessment (PSA) has been widely used to estimate the overall safety of nuclear power plants (NPP) and it provides base information for risk informed application (RIA) and risk informed regulation (RIR). For the effective and correct use of PSA in RIA/RIR related decision making, the risk estimated by a PSA model should be as realistic as possible. In this work, a best-estimate thermal-hydraulic analysis of loss-of-coolant accidents (LOCAs) for the Hanul Nuclear Units 3&4 is first carried out in a systematic way. That is, the behaviors of peak cladding temperature (PCT) were analyzed with various combinations of break sizes, the operating conditions of safety systems, and the operator's action time for aggressive secondary cooling. Thereafter, the results of the thermal-hydraulic analysis have been reflected in the improvement of the PSA model by changing both accident sequences and success criteria of the event trees for the LOCA scenarios.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1083-1090
• /
• 1998

A kind of three-way check valve, so called hydraulic calve was proposed for the substitute of the density lock of passive reactor such as SPWR (System-Integrated Pressurized Water Reactor). The function of the valve are the separation of the borated water from main coolant loop for normal operation and the insurge of the water into the loop for shutdown and the removal of the decay power when the main coolant flow rate is not enough. To verify the operability and the characteristics of the valve, experimental works were executed with 1/3 scale model calve. Also a diffuser model was proposed for the theoretical analysis of the valve.