• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.896-907
• /
• 1995

Titanium 6242(.alpha. + .betha.) alloy has a good strength/weight ratio and is used for aircraft components such as engine disks and compressor blades. When this material is forged at an elevated temperature, the process parameters should be carefully controlled because the process window of this material is quite narrow. In the present investigation, a rigid-thermoviscoplastic finite element method is used to predict the deformation behavior and temperature/strain distributions in an engine disk during near-net shape hot forging. The purpose of the investigation is to obtain a proper ram speed profile, assuming the hydraulic press used in the forging is capable of varying ram speed during loading. In result, it was found that the ram speed at constant strain-rate of 0.5/sec shows a sound deformation behavior, a relatively uniform deformation and a good temperature distribution. This information is also valuable in predicting resulting microstructures in the disk.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 춘계학술발표회 논문집
• /
• pp.79-88
• /
• 2008

1994년 처음으로 국내 지반공학자들에게 소개된 수압파쇄 시험법은, 측정장비 및 해석방법에 있어서 많은 발전을 이루어 왔다. 파이프라인 타입이었던 제1세대 수압파쇄 시험장비는 다루기가 쉽지 않았고 파이프 연결부위에서의 압력 누설 문제가 대두되면서, 제2세대라 불리는 와이어라인 타입으로 보완된 바 있으나, 기존의 시스템에 비해 많은 장점을 가짐에도 불구하고 공기압축기를 별도로 설치해야 하는 문제점을 여전히 안고 있어, 2004년 이후 이를 모두 포함하는 현재의 제3세대 all-in-one 시스템으로 보완된 바 있다. 장비의 발전과 함께, 응력해석을 위한 소프트웨어의 발전도 꾸준히 진행되어온 바, 불확실한 결정값으로 인해 가장 다루기 어려운 균열폐쇄압력에 대하여 여러 가지 기법을 적용함으로써 가장 합리적인 값을 도출해내는 방법의 개발이 그 한 예가 될 것이다. 이러한 지난 10여년 간의 기술발전과 함께 국내 대부분의 지역에서 수행된 수압파쇄시험을 통하여 대한민국의 거의 전 지역에 대한 측정결과들을 축적할 수 있었으며, 현재 이 결과값은 터널굴착을 위한 기초설계단계에서 널리 활용되고 있다. 향후 해저터널의 건설과 관련하여 해상에서의 수압파쇄 초기응력측정법 또한 꾸준히 개발되고 있으나, 지금까지 축적된 내륙에서의 초기응력 측정값이 해저터널의 안전한 설계를 위해 직간접적으로 사용되어지길 기대하며, 현재까지 수압파쇄시험을 통해 얻어진 한반도의 초기응력의 평균 크기와 방향을 지질학적 특성결과와 관련 지어 제시하고자 한다.

• Tribology and Lubricants
• /
• 제24권3호
• /
• pp.111-121
• /
• 2008

An integrated in-line oil monitoring detector assigned for continuous in situ monitoring multiple parameters of oil performance for predicting economically optimal oil change intervals and equipment condition control is presented in this study. The detector estimates oil deterioration based on the information about chemical degradation, total contamination, water content of oil and oil temperature. The oil oxidation is estimated by "chromatic ratio", total contamination is measured by the changes in optical intensity of oil in three optical wavebands ("Red", "Green" and "Blue") and water content is evaluated as Relative Saturation of oil by water. The detector is able to monitor oils with low light absorption (hydraulic, transformer, turbine, compressor and etc. oils) as well as oils with rather high light absorption in visible waveband (diesel and etc. oils). In a case study that the detector is applied to a diesel engine oil, it is found that the detector provides good results on oil chemical degradation as well as soot concentration.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.3-8
• /
• 1998

The industrial revolution in England was based on the manufacturing systems by the power of water mill and rapidly progressed by the innovation of steam engine. It is no exaggeration to say that today's civilization is realized by the development of various types of power machinery, namely fluid machinery and heat engine. The electric energy is converted mainly from thermal energy (mainly steam) of mineral oil, coal and nuclear fuel through generator connected with steam turbine which is a kind of power machinery. There are various types of power machinery as shown in Tables 1a and 1b. They are classified into two types by use. One is absorption type of fluid and/or thermal energy, for examples, windmill and heat engine. The other is provision type of the energies for examples, pump, compressor and propulsion. By flow type, they are also classified by two types, turbo type and positive-displacement type. The turbo type began from water mill and windmill and evolve to steam turbine and finally to gas turbine. The positive-displacement type started from reciprocating water pump and developed into steam engine and changed to reciprocating combustion engine. The pumps and motors used in oil hydraulic system for power control are also positive-displacement type.

• Tribology and Lubricants
• /
• 제40권3호
• /
• pp.78-83
• /
• 2024

The development of eco-friendly alternative energy sources has become a global priority owing to the depletion of fossil fuels and an increase in environmental concerns. Hydrogen energy has emerged as a promising clean energy source, and hydrogen compressors play a crucial role in the storage and distribution of compressed hydrogen. However, harsh operating conditions lead to the rapid deterioration of conventional lubricants in hydrogen compressors, thereby necessitating the development of advanced lubrication technologies. This study introduces micrometer-sized silicone rubber powders as lubricant additives to enhance the lubrication performance of hydraulic oils in hydrogen compressors. We prepare silicone rubber powders by varying the ratio of the silicone rubber base to the curing agent and investigate their effects on interfacial properties, friction behavior, and wear characteristics. The findings reveal that the incorporation of silicone rubber powders positively influences the surface affinity, wettability, friction reduction, and wear resistance of the lubricants on the 304SS substrate. Moreover, we identify the optimal lubricant formulations, with a 15:1 ratio demonstrating the most effective friction reduction and a 5:1 ratio exhibiting the highest wear resistance. The controlled surface modification by the silicone rubber powder and the enhanced interfacial characteristics of the powder-containing lubricants synergistically contribute to the improved lubrication performance. These results indicate the potential of silicone rubber powder additives for the development of long-life lubrication solutions for hydrogen compressors and related applications, ultimately contributing to the advancement of sustainable energy technologies.

• 한국항공우주학회지
• /
• 제34권7호
• /
• pp.105-111
• /
• 2006

항공기 엔진은 항공기가 각종 기동을 수행하도록 추력을 발생하는 것 외에 기동 수행을 위해 작동되는 조종면에 공급될 유압계통의 동력과 각종 항전장비 작동을 위한 전기계통의 동력을 공급한다. 엔진으로부터 제공되는 동력은 엔진의 고압압축기로부터 추출되기 때문에 축마력(Horsepower Extraction, HPX)이라하며, 추출되어 제공되는 엔진 축마력이 유압계통과 전기계통에서 요구하는 요구 축마력보다 작게 되면 엔진에 과도한 부하가 걸려 엔진회전수 감소(Rollback) 및 심한 경우 실속(stall)등이 발생할 수 있다. T/A-50체계개발 동안 요구 축마력과 엔진의 공급 축마력에 대한 비교 해석을 수행하였고, 해석 결과 엔진 축마력이 요구 축마력보다 작은 것을 확인하였다. 엔진 축마력 증가를 위한 엔진 제어 스케쥴 변경이 수행되었으며, 변경된 제어 스케쥴이 장착된 엔진을 이용하여 T/A-50비행시험을 수행하였다. 비행시험 결과를 통해 해석 결과 및 변경된 제어 스케쥴의 타당성을 검증하였다.