• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.610-617
• /
• 2009

This paper proposes a cross-layer design combining adaptive modulation and coding (AMC) with truncated hybrid automatic repeat request (HARQ) for wireless multicast transmission, in order to increase the spectral efficiency while meeting the target quality-of-service (QoS). In the design, we provide the selection criterion of AMC so as to satisfy the target packet error rate (PER) of all users when the multicast data is received through the common channel and the number of retransmission is limited by the delay constraint of the service. The analytically derived results show that the cross-layer design using HARQ provides a better spectral efficiency than the AMC without HARQ by allowing retransmission and code combining. It is also observed that the design for multicast outperforms that for unicast in the mid to high signal-to-noise ratio region.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.3
• /
• pp.47-61
• /
• 2012

parallel transmitting system with channel bonding method have been proposed to transmit mass content such as UHD(Ultra High Definition) in HFC(Hybrid Fiber Coaxial) networks. However, this system may lead to channel resource problem because the system needs many channels to transmit mass content. In this paper, we analyze three effective bandwidth approximation algorithms to use the bonding channel efficiently. These algorithms are the effective bandwidth of Gaussian approximation method algorithm proposed by Guerin, the effective bandwidth based on statistics of video frames proposed by Lee and the effective bandwidth based on Gaussian traffic proposed by Nagarajan. We also evaluate compatibility of algorithms to the mass broadcasting service. OPNET simulator is used to evaluate the performance of the algorithms. For accuracy of simulation, we make mass source from real HD broadcasting stream.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.9-19
• /
• 1999

An increase of the number of the real time applications and the Internet hosts make the Internet architecture changed. Current Internet architecture has some problems to process the real time traffics. To solve these problem, a new Internet architecture is proposed as the Integrated Service model. In the current Internet, as multicast protocols, the QoS multicast and the best-effort multicast have been studied in their separate network environments. But, the Integrated Service Packet Network is a heterogeneous network composed of the QoS delivery domain and the best-effort delivery domain. Thus, those separated multicast protocols have limitations in an ISPN. In this paper, we propose a multicast protocol for the ISPN with the QoS and the best-effort multicasting, and analyze the performance of this protocol. As a result, we find that the packet losses are same for hybrid multicast and best-effort multicast when the bandwidth is sufficient. But, if there exist some background traffics, the hybrid multicast has less packet loss than of the best-effort multicast.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.723-733
• /
• 2015

The OTT service that provides multimedia video has spread over the Internet for terminals with a variety of resolutions. The terminals are in communication via a networks such as 3G, LTE, VDSL, ADSL. The service of the network has been increased for a variety of terminals giving rise to the need for a new way of encoding multimedia is increasing. SVC is an encoding technique optimized for OTT services. We proposed an efficient multimedia management system for the SVC encoded multimedia data. The I/O trace was generated using a zipf distribution, and were comparatively evaluated for performance with the existing system.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.75-78
• /
• 2005

Inheritance of cocoon and shell weight characters in silkworm crosses between sex-limited at larva stage lines, including three (NIG$_{1}$ $\times$ TV$_{3/2}$ ,NIG$_{1}$ $\times$ TBV$_{2/24}$ and NIG$_{1}$ $\times$ B$_{2/6}$ ) from Japanese type and three (NIG$_{2}$ $\times$ B$_{2/6}$ ,TV$_{3/2}$ $\times$ NIG$_{1}$ and NIG$_{2}$ $\times$ TBV$_{2/24}$ ) from Chinese type was studied at Regional Centre for Scientific­Applied Service - Vratza during the period of 2000 ­2002. Inheritance of tested characters in F I was deter­mined through genetic parameters, additiveness (a), dominance (d) and their ratio (d/a). Degree and frequency of transgressions in F$_{2}$ were calculated also. Over dominance (d/a(>) 1) with bigger contribution of the parent with higher value was determined at inheritance tested characters. Transgressions obtained at cocoon and shell weight characters were positive and varied in wide limits. The productivity of parent's lines had defined the variability of genetic parameters for degree and frequency of transgressions. Combination of positive transgressions at cocoon and shell weight characters in F2 hybrid populations from sex-limited at larva stage allow us to select individuals with high productive potential for further use in selection programs.

• Computers and Concrete
• /
• v.17 no.1
• /
• pp.29-51
• /
• 2016

Tension-stiffening is the contribution of concrete between the cracks to carry tensile stresses after cracking in Reinforced Concrete (RC) members. In this paper, a tension-stiffening model has been proposed for computationally efficient nonlinear analysis of RC flexural members subjected to service load. The proposed model has been embedded in a typical cracked span length beam element. The element is visualized to consist of at the most five zones (cracked or uncracked). Closed form expressions for flexibility and stiffness coefficients and end displacements have been obtained for the cracked span length beam element. Further, for use in everyday design, a hybrid analytical-numerical procedure has been developed for nonlinear analysis of RC flexural members using the proposed tension-stiffening model. The procedure yields deflections as well as redistributed bending moments. The proposed model (and developed procedure) has been validated by the comparison with experimental results reported elsewhere and also by comparison with the Finite Element Method (FEM) results. The procedure would lead to drastic reduction in computational time in case of large RC structures.

• The Journal of the Korea Contents Association
• /
• v.3 no.3
• /
• pp.74-84
• /
• 2003

The Location Service (LCS) feature which provides the terminal UE’s geographical location information has been important issues in IMT-2000 system. The existing location positioning methods are classified into the cell ID based, OTDOA, and network assisted GPS. In this paper, a new hybrid location positioning method which combine three of these methods is proposed. Then the LCS protocol is developed under SDL (Specification and Description Language) development environment after designing a new LCS system architecture and behavior. This protocol design covers the LCS functional model and signaling procedure, system architecture, primitive and data structure, and process SDL diagrams.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.794-802
• /
• 2017

In this paper, a wireless powered communication network (WPCN) consisting of a hybrid access point (H-AP) and multiple user equipment (UE), all of which operate in full-duplex (FD), is described. We first propose a transceiver structure that enables FD operation of each UE to simultaneously receive energy in the downlink (DL) and transmit information in the uplink (UL). We then provide an energy usage model in the proposed UE transceiver that accounts for the energy leakage from the transmit chain to the receive chain. It is shown that the throughput of an FD WPCN using the proposed FD UE (FD-WPCN-FD) can be maximized by optimal allocation of the UL transmission time to the UE by solving a convex optimization problem. Simulation results reveal that the use of the proposed FD UE efficiently improves the throughput of a WPCN with a practical self-interference cancellation capability at the H-AP. Compared to the WPCN with FD H-AP and half-duplex (HD) UE, FD-WPCN-FD achieved an 18% throughput gain. In addition, the throughput of FD-WPCN-FD was shown to be 25% greater than that of WPCN in which an H-AP and UE operated in HD.

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.260-270
• /
• 2019

As the growth of developing Islamic countries, Muslims are into the world. The most important thing for Muslims to purchase food, ingredient, cosmetics and other products are whether they were certified as 'Halal'. With the increasing number of Muslim tourists and residents in Korea, Halal restaurants and markets are on the rise. However, the service that provides information on Halal restaurants and markets in Korea is very limited. Especially, the application of recommendation system technology is effective to provide Halal restaurant information to users efficiently. The profiling of Halal restaurant information should be preceded by design of recommendation system, and design of recommendation algorithm is most important part in designing recommendation system. In this paper, an Intelligent Recommendation Service system for offering Halal food (IRSH) based on dynamic profiles was proposed. The proposed system recommend a customized Halal restaurant, and proposed recommendation algorithm uses hybrid filtering which is combined by content-based filtering, collaborative filtering and location-based filtering. The proposed algorithm combines several filtering techniques in order to improve the accuracy of recommendation by complementing the various problems of each filtering. The experiment of performance evaluation for comparing with existed restaurant recommendation system was proceeded, and result that proposed IRSH increase recommendation accuracy using Halal contents was deducted.

• Structural Engineering and Mechanics
• /
• v.70 no.6
• /
• pp.751-763
• /
• 2019

Steel-concrete composition is widely used in the construction due to efficient utilization of materials. The service load behavior of composite structures is significantly affected by cracking, creep and shrinkage effects in concrete. In order to control these effects in concrete slab, an efficient and novel strategy has been proposed by use of fiber reinforced concrete near interior supports of a continuous beam. Numerical study is carried out for the control of cracking, creep and shrinkage effects in composite beams subjected to service load. A five span continuous composite beam has been analyzed for different lengths of fiber reinforced concrete near the interior supports. For this purpose, the hybrid analytical-numerical procedure, developed by the authors, for service load analysis of composite structures has been further improved and generalized to make it applicable for composite beams having spans with different material properties along the length. It is shown that by providing fiber reinforced concrete even in small length near the supports; there can be a significant reduction in cracking as well as in deflections. It is also observed that the benefits achieved by providing fiber reinforced concrete over entire span are not significantly more as compared to the use of fiber reinforced concrete in certain length of beam near the interior supports in continuous composite beams.