• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.314-314
• /
• 2013

Recently, flexibility is one of the hottest issues in the field of electronic devices. For flexible displays or solar cells, a development of transparent conductive electrodes (TCEs) with flexibility, bendability and foldability is an essential element. Hundreds of nanometers indium-tin-oxide (ITO) films have been widely used and commercialized as a transparent electrode, but their brittleness make them difficulty to apply flexible electronics. Many researchers have been studying for flexible TCEs such as a few layers of graphene sheets, carbon nanotube networks, conductive polymer films and combinations among them. Although gained flexibility, their transmittance and resistivity have not reached those of commercialized ITO films. Metal grids electrode cannot act as TCEs only, but they can be used to lower the resistance of TCEs with few losses of transmittance. However, the possibility of device shortage will be rise at the devices with metal grids because a surface flatness of TCEs may be deteriorated when metal grids are introduced using conventional methods. In our research, we have developed hybrid TCEs, which combined tens of nanometers ITO film and metal grids which are embedded in flexible substrate. They show $13{\Omega}$/${\Box}f$ sheet resistance with 94% of transmittance. Moreover, the sheet resistance was maintained up to 1 mm of bending radius. Also, we have verified that flexible organic light emitting diodes and organic solar cells with the TCEs showed similar performances compared to commercial ITO (on glass substrate) devices.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.265-273
• /
• 2014

Wave-body interaction is simulated using a developed code based on the flux-difference splitting scheme for immiscible and incompressible fluids and the hybrid Cartesian/immersed boundary method. A free surface is captured as a moving contact discontinuity within a fluid domain and an approximated Riemann solver is used to estimate the inviscid flux across the discontinuity. Immersed boundary nodes are identified inside an instantaneous fluid domain near a moving body, then dependent variables are reconstructed at those immersed boundary nodes based on interpolation along local normal lines to the boundary. Free surface flows around an oscillating cylinder are simulated and the computed wave elevations are compared with other reported results. The generation of a solitary wave by a moving wave-maker is simulated and the time histories of wave elevations at two different points are compared with other results. The developed code is applied to simulate body motion of an elastically mounted circular cylinder as a solitary wave passes the body. The force acting on an elastically mounted cylinder is compared with the force acting on a fixed cylinder. Grid independency of the computed body motion is established based on a comparison of results using three different-size grids.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.25-31
• /
• 2009

The most important component of wind turbine is rotor blades. The developing method of wind turbine was focused on design of rotor blade. By the way, the design of a rotating body is more decisive process in order to adjust the performance of wind turbine. For instance, the design allows the designer to specify the wind characteristics derived by topographical map. The iterative solver is then used to adjust one of the selected inputs so that the desired rotating performance which is directly related to power generating capacity and efficiency is achieved. Furthermore, in order to save the money for manufacturing the rotor blades and to decrease the maintenance fee of wind power generation plant, while decelerating the cut-in speed of rotor. Therefore, the design and manufacturing of rotating body is understood as a substantial technology of wind power generation plant development. The aiming of this study is building-up the profitable approach to designing of rotating body as a system for the wind power generation plant. The process was conducted in two steps. Firstly, general designing and it’s serial testing of rotating body for voltage measurement. Secondly, the serial test results above were examined with the CFD code. Then, the analysis is made on the basis of amount of electricity generated by rotor-blades and of cut-in speed of generator.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.335-344
• /
• 2011

A curvilinear non-hydrostatic free surface model is developed to investigate nonlinear wave interactions in a circular channel. The proposed model solves the unsteady Navier-Stokes equations in a three-dimensional domain with a pressure correction method, which is one of fractional step methods. A hybrid staggered-grid layout in the vertical direction is implemented, which renders relatively simple resulting pressure equation as well as free surface closure. Numerical accuracy with respect to wave nonlinearity is tested against the fifth-order Stokes solution in a two-dimensional numerical wave tank. Numerical applications center on the evolution of nonlinear waves including diffraction and reflection affected by the curvature of side wall in a circular channel comparing with linear waves. Except for a highly nonlinear bichrmatic wave, the model's results are in good agreement with superimposed analytical solution that neglects nonlinear effects. Through the numerical simulation of the highly nonlinear bichramatic wave, the model shows its capability to investigate the evolution of nonlinear wave groups in a circular channel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6419-6424
• /
• 2015

Recently, high-cost energy storage systems are applying to hybrid generation systems with wind turbine and diesel generator in island areas for stable operation. But, this paper proposes an operating algorithm and modeling method of an islanding microgrid that is composed of PMSG(Permanent Magnet Synchronous Generator) and Diesel Generator applied in island areas without such energy storage system. Initially, the operating algorithm was proposed for frequency and voltage to be maintained within the proper ranges for the load and weather change. And then the modeling method were proposed for PMSG, WT-side AC/DC converter and Grid-side DC/AC converter. The proposed operating algorithm and modeling method were applied to a typical islanded microgrid with PMSG wind turbine and diesel generator. The frequency and voltage was kept within the permissible ranges and the proposed method was proven to be appropriate through simulations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.43-43
• /
• 2015

천수방정식을 사용하는 초기 수치모형은 프로드수($F_4$)가 변화하는 흐름 즉, 상류방향과 하류방향으로 전파하는 홍수파를 동시에 해석하기 위해 중앙 차분기법이 필요한 상류(sub-critical flow)와 흐름방향에 따른 상류이송(upwinding)기법이 필요한 사류(super-critical flow)가 나타나는 흐름해석에서 어려움이 있었다. 하지만, 근사 Riemann 해법의 등장으로 흐름방향에 관계없이 특성선을 따라 정확한 상향가중기법의 적용이 가능하게 되어, 천수방정식을 지배방정식으로 하는 수치모형이 더욱 실용적으로 적용될 수 있도록 하였다. 따라서, 현재 근사 Riemann 해법은 Godunov 형 유한체적 기법, 불연속 Galerkin 혹은 Petrov-Galerkin 유한요소기법 그리고 Boussinesq 기법에도 적용되고 있으며, 특히 Godunov 형 유한체적기법과 결합한 근사 Riemann 해법은 댐 붕괴, 하천 범람 그리고 도시 및 해안지역 침수에 이르기까지 여러 가지 문제에 폭넓게 적용되고 있다. 지금까지 홍수 모델링에 적용된 Godunov형 유한체적모형은 정형 사각격자나 비정형 삼각격자 중에서 한가지의 격자 종류만을 적용한 연구가 주로 수행되었으며, 유한요소모형과 같이 이 두 가지 격자를 동시에 적용한 연구는 거의 이루어지지 않고 있다. 일반적으로, 삼각격자는 사각격자와 는 달리 연구유역의 경계나 지형이 복잡한 경우에도 큰 노력없이 격자의 생성이 가능하나, 격자와 노드의 수가 사각격자보다 많아 계산시간이 많이 소요되는 단점이 있다. 반면, 사각격자는 하천과 같이 선형으로 변하는 지형에 대해서는 표현하기가 용이하며 계산시간의 효율성도 뛰어나다. 본 연구에서는 하천, 도시 그리고 해안지역에서의 효율적이고 정확한 홍수 모델링을 위해 삼각 및 사각격자 그리고 이 두 격자를 동시에 고려한 하이브리드 격자의 적용이 가능한 Godunov형 2차원 유한체적 모형을 개발하였다. 그리고 개발모형을 정확해가 있는 댐 붕괴 문제, 실측치가 존재하는 실험하도 및 실제하도에 삼각, 사각 그리고 혼합격자를 생성하여 모의를 수행하고, 각 적용 격자에 따른 정확성과 효율성 및 장점과 단점을 연구하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.45.1-45.1
• /
• 2021

Horizon Run 5 (HR5) is a cosmological hydrodynamical simulation which captures the properties of the Universe on aGpc scale while achieving a resolution of 1kpc. This enormous dynamic range allows us to simultaneously capture the physics of the cosmic web on very large scales and account for the formation and evolution of dwarf galaxies on much smaller scales. On the back of a remarkable achievement of this, we have finished to run follow-up simulations which have 2 times larger volume than before and are expected to complementary to some limitations of previous HR simulations both for the study on the large scale features and the expansion history in a distant Universe. For these simulations, we consider the sub-grid physics of radiative heating/cooling, reionization, star formation, SN/AGN feedbacks, chemical evolution and the growth of super-massive blackholes. In order to do this project, we implemented a hybrid MPI-OpenMP version of the RAMSES code, 'RAMSES-OMP', which is specifically designed for modern many-core many thread parallel systems. These simulation successfully reproduce various observation result and provide a large amount of statistical samples of Lyman-alpha emitters and protoclusters which are important to understand the formation and expansion history of early universe. These are invaluable assets for the interpretation of current ΛCDM cosmology and current/upcoming deep surveys of the Universe, such as the world largest narrow band imaging survey, ODIN (One-hundred-square-degree Dark energy camera Imaging in Narrow band).

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.67-80
• /
• 2011

Choropleth mapping of population distribution is based on the assumption that people are uniformly distributed throughout each enumeration unit. Dasymetric mapping technique improves choropleth mapping by refining spatially aggregated data with residential information. Further, pycnophylactic interpolation can upgrade dasymetric mapping by considering population distribution of neighboring areas, while preserving the volumes of original units. This study proposed a combined solution of dasymetric mapping and pycnophylactic interpolation to improve the accuracy of population density distribution. Specifically, the dasymetric method accounts for the spatial distribution of population within each census unit, while pycnophylactic interpolation considers population distribution of neighboring area. This technique is demonstrated with 1990 census data of the Athens, GA. with land use land cover information derived from remotely-sensed imagery for the areal extent of populated areas. The results are evaluated by comparison between original population counts of smaller census units (census block groups) and population counts of the grid map built from larger units (census tracts) aggregated to the same areal units. The estimated populations indicate a satisfactory level of accuracy. Population distribution acquired by the suggested method can be re-aggregated to any type of geographic boundaries such as electoral boundaries, school districts, and even watershed for a variety of applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1380-1393
• /
• 2010

This paper presents a design, fabrication and the test results of planar active electronically scanned array(AESA) radar prototype for airborne fighter applications using transmit/receive(T/R) module hybrid technology. LIG Nex1 developed a AESA radar prototype to obtain key technologies for airborne fighter's radar. The AESA radar prototype consists of a radiating array, T/R modules, a RF manifold, distributed power supplies, beam controllers, compact receivers with ADC(Analog-to-Digital Converter), a liquid-cooling unit, and an appropriate structure. The AESA antenna has a 590 mm-diameter, active-element area capable of containing 536 T/R modules. Each module is located to provide a triangle grid with $14.7\;mm{\times}19.5\;mm$ spacing among T/R modules. The array dissipates 1,554 watts, with a DC input of 2,310 watts when operated at the maximum transmit duty factor. The AESA radar prototype was tested on near-field chamber and the results become equal in expected beam pattern, providing the accurate and flexible control of antenna beam steering and beam shaping.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1221-1230
• /
• 2004

In mobile environments, the locations of moving objects such as vehicles, airplanes and users of wireless devices continuously change over time. For efficiently processing moving object information, the database system should be able to deal with large volume of data, and manage indexing efficiently. However, previous research on indexing method mainly focused on query performance, and did not pay attention to update operation for moving objects. In this paper, we propose a novel moving object indexing method, named ACAR-Tree. For processing efficiently frequently updating of moving object location information as well as query performance, the proposed method is based on fixed grid structure with auxiliary R-Tree. This hybrid structure is able to overcome the poor update performance of R-Tree which is caused by reorganizing of R-Tree. Also, the proposed method is able to efficiently deal with skewed-. or gaussian distribution of data using auxiliary R-Tree. The experimental results using various data size and distribution of data show that the proposed method has reduced the size of index and improve the update and query performance compared with R-Tree indexing method.