• 폴리머
• /
• 제31권2호
• /
• pp.111-116
• /
• 2007

폴리우레탄 변형 아크릴레이트(PUA)/실리카 하이브리드 필름은 자외선 경화에 의해 제조되었고, 필름의 표면물성은 경도시험과 접착력 테스트를 통해 분석되었다. 이들 필름은 유기, 무기함량을 mole비로 조성하여 실험하였으며, 무기조성은 실리카 입자의 함량을 기준으로 설정하였다. 필름 층 내의 실리카 입자는 함량에 따라 혹은 분산정도에 따라 내스크래치성이나 필름자체 경도 등의 물성이 많은 차이를 보였는데, 이는 PUA필름 층 내의 실리카 입자들이 균일하게 분포되어 가교결합되어 있었기 때문이다.

• 한국표면공학회지
• /
• 제44권4호
• /
• pp.155-164
• /
• 2011

Electron beam evaporation source is widely used to prepare thin films by physical vapor deposition because it is very effective to vaporize materials and there is virtually no limit to vaporize materials including metals and compounds such as oxide. In this study, evaporation characteristics of various metals and compounds from an electron beam evaporation source have been studied. The 180 degree deflection type electron beam evaporation source which has 6-hearth crucibles and is capable of inputting power up to 10 kW was employed for evaporation experiment. 36 materials including metals, oxides and fluorides have been tested and described in terms of optimum crucible liner, evaporation state, stability, and so on. Various crucible liners have been tried to find out the most effective way to vaporize materials. Two types of crucible liners have been employed in this experiment. One is contact type liner, and the other is non-contact type one. It has been tried to give the objective information and the most effective evaporation method on the evaporation of materials from the electron beam evaporation source. It is concluded that the electron beam evaporation source can be used to prepare good quality films by choosing the appropriate crucible liner.

• 대한수학회논문집
• /
• 제20권1호
• /
• pp.179-193
• /
• 2005

We present results of fully nonlinear time-dependent simulations of a thin liquid film flowing up an inclined plane. Equations of the type $h_t+f_y(h) = -{\in}^3{\nabla}{\cdot}(M(h){\nabla}{\triangle}h)$ arise in the context of thin liquid films driven by a thermal gradient with a counteracting gravitational force, where h = h(x, t) is the fluid film height. A hybrid scheme is constructed for the solution of two-dimensional higher-order nonlinear diffusion equations. Problems in the fluid dynamics of thin films are solved to demonstrate the accuracy and effectiveness of the hybrid scheme.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.391-397
• /
• 2006

We present investigations of a hybrid type superconducting fault current limiter (SFCL), which consists of transformers and resistive superconducting elements. The secondary windings of the transformer were separated into several electrically isolated circuits and linked inductively with each other by mutual flux, each of which has a superconducting current limiting element of $YBa_2Cu_3O_7$ (YBCO) stripes as a current limiting element. Simple connection in series of the SFCL elements tends to produce ill-timed quenching because of power dissipation unbalance between SFCL elements. Both electrical isolation and mutual flux linkage of the elements provides a solution to power dissipation unbalance, inducing simultaneous quench and current redistribution of the YBCO films. This design enables to increase the voltage rating of SFCL with given YBCO stripes.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.323-330
• /
• 2016

The flexible transparent conducting films (TCFs) are required to realize flexible optoelectronic devices. 1D nanomaterials such as carbon nanotubes (CNTs), metal nanowires are good candidates to replace indium tin oxide that is currently used to fabricate transparent electrode. Particularly, silver nanowires are used to produce flexible TCFs. In this review, we introduce TCF technologies based on silver nanowires/CNTs hybrid structures. CNTs can compromise drawbacks of silver nanowires for applications in high performance TCFs for optoelectronic devices.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.5-10
• /
• 2007

We prepared four different $MgB_2$ films on $Al_2O_3$ by hybrid physical chemical vapor deposition method with thicknesses ranging from $0.65\;{\mu}m$ to $1.2\;{\mu}m$. X-ray diffraction patterns confirm that all the $MgB_2$ films are c-axis oriented perpendicular to $Al_2O_3$ substrates. The superconducting onset temperature of $MgB_2$ films were between 39.39K and 40.72K. The residual resistivity ratio of the $MgB_2$ films was in the range between 3.13 and 37.3. We measured the angle dependence of critical current density ($J_c$) and resistivity, and determined the upper critical field ($H_{c2}$) from the temperature dependence of the resistivity curves. The anisotropy ratios defined as the ratio of the $H_{c2}$ parallel to the ab-plane to that perpendicular to the ab-plane were in the range of 2.13 to 4.5 and were increased as the temperature was decreased. Some samples showed increase of $J_c$ and decrease of resistivity when a magnetic field in applied parallel to the c-axis. We interpret this angle dependence in terms of enhanced flux pinning due to columnar growth of $MgB_2$ along the c-axis.

• 한국콘텐츠학회논문지
• /
• 제16권5호
• /
• pp.172-179
• /
• 2016

80년대 한국사회는 70년대 산업화의 연속과 90년대 민주화의 열기가 혼종된 시기이다. 80년대 한국영화는 산업화와 민주화 속에서 긴장과 갈등 양상을 영화의 공간과 같은 양식에 약호화한다. 이 연구의 목적은 80년대 한국사회의 산업화와 민주화의 양상이 80년대 한국영화에 어떻게 약호화되는가를 고찰하는 것이다. 구체적으로는 80년대 서울 도시경관의 변화를 직접적으로 반영하고 있는 80년대 한국영화의 도시 공간 재현양식에 주목한다. 이 연구는 1980년 개봉작 <바람불어 좋은날>과 1988년 개봉작 <칠수와 만수>의 공간 구성 양식 분석을 통해 1980년대를 관통하는 한국사회의 변화 양상을 살펴본다. 70년대를 마무리하는 <바 불어 좋은날>과 90년대를 맞이하는 <칠수와 만수>는 80년대 한국영화사의 단면과 한국사회상의 혼종 양상을 보여준다. 특히 두 영화의 도시 공간 양식은 한국사회의 정치, 경제, 문화를 총체적으로 약호화한다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.12-18
• /
• 2017

Transparent organic-inorganic hybrid hard coating films were prepared by the addition of $SiO_2$ or $ZrO_2$, as an inorganic filler to improve the hardness property, filler was highly dispersed in the acrylic resin. To improve the compatibility in the acrylic resin, $SiO_2$ or $ZrO_2$ is surface-modified using various silanes with variation of the modification time and silane content. Depending on the content and kind of the modified inorganic oxide, transparent modified inorganic sols were formulated in acryl resin. Then, the sols were bar coated and cured on PET films to investigate the optical and mechanical properties. The optimized film, which has a modified $ZrO_2$ content of 4 wt% markedly improved in terms of the hardness, haze, and transparency as compared to neat acrylate resin and acrylate resin containing modified $SiO_2$ content of 8 wt%. Meanwhile, the low transparency and high haze of these films slowly appeared at $SiO_2$ content above 10 wt% and $ZrO_2$ content of 5 wt%, but the hardness values were maintained at 2H and 3H, respectively, in comparison with the HB of neat acrylate resin.

• 한국표면공학회지
• /
• 제35권3호
• /
• pp.121-126
• /
• 2002

WC/C multilayered films were deposited by arc ion plating and magnetron sputter hybrid system with various $C_2$H$_2$ flow rates and bias voltages. The coatings have been characterized with respect to their chemical composition (Glow Discharge Optical Emission Spectroscopy), hardness(Knoop micro-hardness), residual stress(Laser beam bending) and friction coefficient(Ball on disc type wear test). Deposition rate, microhardness and residual stress of WC/C films were observed to increase with increasing the $C_2$$H_2$ flow rates. The highest hardness and residual stress were measured to be 26.5 GPa and 1.1GPa for, WC/C film deposited at substrate bias of -100V. WC/C multilayered film was obtained very low friction coefficient(~0.1).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.768-771
• /
• 2006

Uniformity and performance characteristics of LTPS TFTs are important parameters for making advanced active-matrix displays. In this paper, we describe an SLS-based crystallization approach for producing orientation-controlled Si films with reduced concentrations of planar defects that stand to potentially deliver unprecedented levels of device uniformity and performance. Specifically, a 2-step process referred to as hybrid SLS has been developed that produces a variety of high-quality {100} surface-oriented Si films.