• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.42-48
• /
• 2014

An experimental study was performed estimating COP(Coefficient of Performance) of air-conditioning cycle with inverter scroll compressor. All experiments were done for various compressor speeds from 1000~4000 rpm and used the inverter controller called CANDy to change the compressor rpm. The air-conditioning cycle components in the apparatus were used as same with components of YF hybrid car. To estimate the COP, this study measured the temperature and pressure at inlets and outlets of compressor, condenser, and evaporator. And also measured the compressor input power using Powermeter. Through the experiments, the maximum error to estimate COP was shown about ${\pm}6.09%$ at 3500rpm. This study revealed that the condenser temperature and pressure were increased and the evaporator temperature and pressure were decreased with the increased compressor speed. And also, the COP was decreased with increased compressor speed. Those results can be used the basic and fundamental data to design the air-conditioning cycle with inverter scroll compressor.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.220-233
• /
• 2019

This work aims to study and analyze the various operating modes of universal power converter which is powered by solar and thermoelectric generators. The proposed converter is operated in a DC-DC (buck or boost mode) and DC-AC (single phase) inverter with high efficiency. DC power sources, such as solar photovoltaic (SPV) panels, thermoelectric generators (TEGs), and Li-ion battery, are selected as input to the proposed converter according to the nominal output voltage available/generated by these sources. The mode of selection and output power regulation are achieved via control of the metal-oxide semiconductor field-effect transistor (MOSFET) switches in the converter through the modified stepped perturb and observe (MSPO) algorithm. The MSPO duty cycle control algorithm effectively converts the unregulated DC power from the SPV/TEG into regulated DC for storing energy in a Li-ion battery or directly driving a DC load. In this work, the proposed power sources and converter are mathematically modelled using the Scilab-Xcos Simulink tool. The hardware prototype is designed for 200 W rating with a dsPIC30F4011 digital controller. The various output parameters, such as voltage ripple, current ripple, switching losses, and converter efficiency, are analyzed, and the proposed converter with a control circuit operates the converter closely at 97% efficiency.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.254-264
• /
• 2019

This paper proposes an indirect current control technique based on a proportional resonant (PR) approach for the seamless mode transfer of utility interactive inverters. Direct-current and voltage hybrid control methods have been used for inverter control under grid-connected and islanded modes. A large bandwidth can be selected due to the structure of single-loop control. However, this results in poor dynamic transients due to sudden changes of the controller during mode changes. Therefore, inverter control based on indirect current is proposed to improve the dynamic transients by consistently controlling the output voltage under all of the operation modes. A PR-based indirect current control topology is used in this study to maintain the load voltage quality under all of the modes. The design processes of the PR-based triple loop are analyzed in detail while considering the system stability and dynamic transients. The mode transfer techniques are described in detail for both sudden unintentional islanding and islanded mode voltage quality improvements. In addition, they are described using the proposed indirect control structure. The proposed method is verified by the PSiM simulations and laboratory-scale VDER-HILS experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5654-5668
• /
• 2018

Driven by security and real-time demands of Internet of Things (IoT), the timing of fog computing and edge computing have gradually come into place. Gateways bear more nearby computing, storage, analysis and as an intelligent broker of the whole computing lifecycle in between local devices and the remote cloud. In fog computing, the edge broker requires X-aware capabilities that combines software programmability, stream processing, hardware optimization and various connectivity to deal with such as security, data abstraction, network latency, service classification and workload allocation strategy. The prosperous of Field Programmable Gate Array (FPGA) pushes the possibility of gateway capabilities further landed. In this paper, we propose a software-defined gateway (SDG) scheme for fog computing paradigm termed as Fog Computing Zero-Knowledge Gateway that strengthens data protection and resilience merits designed for industrial internet of things or highly privacy concerned hybrid cloud scenarios. It is a proxy for fog nodes and able to integrate with existing commodity gateways. The contribution is that it converts Privacy-Enhancing Technologies rules into provable statements without knowing original sensitive data and guarantees privacy rules applied to the sensitive data before being propagated while preventing potential leakage threats. Some logical functions can be offloaded to any programmable micro-controller embedded to achieve higher computing efficiency.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.111-118
• /
• 2021

Banking systems are sensitive to data privacy since users' data, if not well protected, may be used to perform fake transactions. Blockchains, public and private, are frequently used in such systems thanks to their efficiency and high security. Public blockchains fail to fully protect users' data, despite their power in the accuracy of the transactions. The private blockchain is better used to protect the privacy of the sensitive data. They are not open and they apply authorization to login into the blockchain. However, they have a lower security compared to public blockchain. We propose in this paper a hybrid public-private architecture that profits from network virtualization. The main novelty of this proposal is the use of network virtualization that helps to reduce the complexity and efficiency of the computations. Simulations have been conducted to evaluate the performance of the proposed solution. Findings prove the efficiency of the scheme in reducing complexity and enhancing data privacy by guarantee high security. The contribution conducted by this proposal is that the results are verified by the centralized controller that ensures a correct validation of the resulted blockchains. In addition, computation complexity is to be reduced by profiting from the cooperation performed by the virtual agents.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.21-28
• /
• 1973

This report is prepared to promote cocoon natures for the use of silk reeling material. It is easily understandable that there must be disuniformity composed with superior group and inferior group in commercial silkworms. If such different groups be seperated by some method, it would be a great contribution for the cocoon production. For a comparative purpose, silkworm sex seperation carried out because male silkworms produce more silk than female worms. The author has developed a new chemical reagent available for the seperation of superior group and inferior group from commercial silkworms, which he has named it as Better Hybrid Controller (BHC). The obtained comparative results are summarized as followings. 1. Basic investigation of BHC application a) In case BHC applied with hybrid worms and pure line, the former one starts to adapt mulberry leaves earlyer than pure line variety. b) The mulberry adapting interval distribution of pure line worms after BHC application showed U type distribution, but hybrid worms showed L type or Poisson's distribution. c) In case of BHC application with silkworms, the longer period application is, the duller distribution was formed. d) When silkworms are seperated in two groups by use of BHC application, the earlyer mulberry adapted group is seemed as stronger than the other part and the group ratio is 2 : 1. 2. Comparation between sex seperation result and better hydrid control (BHC) seperation result. a) The cocoon shell per cent of male worm group showed betweer result than the female group but only 0.4% difference between sexes. b) The cocoon shell per cent of superior group, seperated by BHC, showed 0.7% more than the inferior group. c) The average cocoon shell per cent of BHC treated cocoons showed much more than the Control group as 1.6∼2.4% increase. Enven the inferior group showed better result than the Control. d) Such unexpected result is considered to be the result that BHC application is activating some thing with silkworm physiology. e) On the ether hand, the result of sexes seperated groups or male worm group did not show desirable conclusion as far as cocoon shell per cent is concerned. f) However, when the male group was reeled as silk, it showed much better silk yield or silk per cent of cocoon than the female group as much as one per cent difference between by sexes. Such result was brought by superior silk yield from cocoon shell as much as 87.4%. g) On the other hand, the male group showed lowest non breaking reelable ratio (63%) among all group comparation. h) When we compare cocoon qualities by sex seperation and BHC seperation against the Control, there is no qualitative change, but BHC group showed quantitative promotion with cocoon bave length as much as about hundred meters. i) In case of calculation for productive income of cocoon production, BHC applied group showed about ten per cent income promotion more than the Control. The sexes seperated group, however, showed rather negative result because the male cocoon produced poor weight per box eggs which could not cover it by the inclose of silk yield of it. j) So, the BHC application with the fetched worm stage brought about big promotion for cocoon production. k) BHC method may be used either for seperation purpose or quantitative promotion with whole silk-worms. 3. Only male silkworms rearing did not show desirable productivity, so there is no reason to work out it in the fetching stage of worm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.768-779
• /
• 2017

Recently, the great number of mobile devices causes excessive data/control traffic problems in the centralized LTE/EPC network and such dramatically increased traffic is emerging as a critical issue. In the Centralized Mobility Management (CMM) based LTE/EPC network, the Packet Data Network Gateway (P-GW) plays the centralized mobility anchor role and it accommodates most of data traffic. To solve this problem, the IETF has proposed the Distributed Mobility Management (DMM) scheme, but it has only focused on the data traffic load balancing and could not solve the control traffic overload problem. In this paper, therefore, we propose a new SDN based hybrid CMM/DMM Mobility Management (C-DMM) architecture based on Packet Network Edge Gateway (P-EGW), and introduce a selection scheme between CMM and DMM according to a device's mobility and the number of PDN connections. In order to prove the efficiency of the proposed architecture and scheme, we compare the data traffic processing load and the control traffic processing load over each scheme by emulating them in the ONOS controller and the Mininet environment.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.49-53
• /
• 2013

A current sensor is one of important component which is used for the electrical current measurement during charge and discharge of the battery, and monitoring system of the motor controller in the electric and hybrid vehicle. In this study, we have developed an open loop type current sensor using GaAs Hall sensor and magnetic core has an air gap. The Hall sensor detect magnetic field produced by the current to be measured. The 3 mm air gap core was made by HGO electrical steel sheets after slitting, winding, annealing, molding, and cutting. Developed current sensor shows 0.03 % linearity within DC current range from -400 A to +400 A. Operating temperature range was extended to the range of $-40{\sim}105^{\circ}C$ using temperature compensating electronic circuit. To Improve frequency bandwidth limit due to the air flux of PCB (Printed Circuit Board) and Hall sensor, We employed an air flux compensating loop near Hall sensor or on PCB. Frequency bandwidth of the sensor was 100 kHz when we applied sine wave current of $40A{\cdot}turn$ in the frequency range from 100 Hz to 100 kHz. For the dynamic response time measurement, 5 kHz square wave current of $40A{\cdot}turn$ was applied to the sensor. Response time was calculated time reach to 90 % of saturation value and smaller than $2{\mu}s$.

• Journal of Intelligence and Information Systems
• /
• v.14 no.2
• /
• pp.83-102
• /
• 2008

Ubiquitous computing requires timely supply of contextual information in order to upgrade decision quality. In this sense, this study is aimed at proposing a multi-dynamic decision support system for highly ill-structured problems. Especially, it is very important for decision makers in the ubiquitous computing to coordinate conflicts among local goals and global goal harmoniously. The proposed Multi-Dynamic Decision Support System (MDDSS) is basically composed of both central structure and distributed structure, in which central structure supports multi objects decision making and distributed structure supports individual decision making. Its hybrid architecture consists of decision processor, multi-agent controller and intelligent knowledge management processor. Decision processor provides decision support using contexts which come from individual agents. Multi-agent controller coordinates tension among multi agents to resolve conflicts among them. Meanwhile, intelligent knowledge management processor manages knowledge to support decision making such as rules, knowledge, cases and so on. To prove the validity of the proposed MDDSS, we applied it to an u-fulfillment problem system in which many kinds of decision makers exist trying to satisfy their own objectives, and timely adjustment of action strategy is required. Therefore, the u-fulfillment problem is a highly ill-structured problem. We proved its effectiveness with the aid of multi-agent simulation comprising 60 customers and 10 vehicles under three experimental modes.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1305-1317
• /
• 2015

Distributed generation systems (DGSs) have been getting more and more attention in terms of renewable energy use and new generation technologies in the past decades. The self-excited induction generator (SEIG) occupies an important role in the area of energy conversion due to its low cost, robustness and simple control. Unlike synchronous generators, the SEIG has to absorb capacitive reactive power from the outer device aiming to stabilize the terminal voltage at load changes. This paper presents a novel static VAR compensator (SVC) called a magnetic energy recovery switch (MERS) to serve as a voltage controller in SEIG powered DGSs. In addition, many small scale SEIGs, instead of a single large one, are applied and devoted to promote the generation efficiency. To begin with, an expandable mathematic model based on a d-q equivalent circuit is created for parallel SEIGs. The control method of the MERS is further improved with the objective of broadening its operating range and restraining current harmonics by parameter optimization. A hybrid control strategy is developed by taking both of the stand-alone and grid-connected modes into consideration. Then simulation and experiments are carried out in the case of single and double SEIG(s) generation. Finally, the measurement results verify that the proposed DGS with SVC-MERS achieves a better stability and higher feasibility. The major advantages of the mentioned variable reactive power supplier, when compared to the STATCOM, include the adoption of a small DC capacitor, line frequency switching, simple control and less loss.