• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.149-151
• /
• 2005

This paper deals with the novel control algorithm of single-phase hybrid active power filter for the compensation of harmonic current components in nonlinear R-L load with passive active power filters. To construct two-axes coordinate, an imaginary second phase was made by giving time delay to line current. In this proposed method, the new signal, which was the delayed through the filtering by the phase-delay property of low-pass filter, is used as the secondary phase. Because two phases have different phase, instantaneous calculation of harmonic current is possible. In this paper, a reference voltage is created by multiplying gain of filter by compensation current using the rotating reference frames that synchronizes with source-frequency, not applying to instantaneous reactive power theory which has been used with the existing fixed reference frames. This paper shows the experimental results, which provide a high accuracy and extremely fast response of single-phase hybrid active Bower filter under the operation with the proposed control method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2011

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.719-732
• /
• 2020

Real-time hybrid simulation (RTHS) which combines physical experiment with numerical simulation is an advanced method to investigate dynamic responses of structures subjected to earthquake excitation. The desired displacement computed from the numerical substructure is applied to the experimental substructure by a servo-hydraulic actuator in real time. However, the magnitude decay and phase delay resulted from the dynamics of the servo-hydraulic system affect the accuracy and stability of a RTHS. In this study, a robust stability analysis procedure for a general single-degree-of-freedom structure is proposed which considers the uncertainty of servo-hydraulic system dynamics. For discussion purposes, the experimental substructure is a portion of the entire structure in terms of a ratio of stiffness, mass, and damping, respectively. The dynamics of the servo-hydraulic system is represented by a multiplicative uncertainty model which is based on a nominal system and a weight function. The nominal system can be obtained by conducting system identification prior to the RTHS. A first-order weight function formulation is proposed which needs to cover the worst possible uncertainty envelope over the frequency range of interest. Then, the Nyquist plot of the perturbed system is adopted to determine the robust stability margin of the RTHS. In addition, three common delay compensation methods are applied to the RTHS loop to investigate the effect of delay compensation on the robust stability. Numerical simulation and experimental validation results indicate that the proposed procedure is able to obtain a robust stability margin in terms of mass, damping, and stiffness ratio which provides a simple and conservative approach to assess the stability of a RTHS before it is conducted.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.972-975
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays driven by fringe field. The results show that the optimal retardation value of the cell is $0.289{\mu}m$, which allows for the cell to have a practical cell gap of larger than $3{\mu}m$ when manufacturing. A reflectance of the dark state is only 0.114% for an incident light 550nm. At this condition, the light efficiency of white state reaches 92.7%. Further, we have studied a new reflective display with polarizer, optical compensation with half plate, LC plus reflector. The display with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $120^{\circ}$ in vertical direction and $160^{\circ}$ in horizontal direction.

• 음성과학
• /
• 제14권2호
• /
• pp.115-126
• /
• 2007

There have been many research efforts to improve the performance of the speech recognizer in noisy conditions. Among them, the model compensation method and the speech enhancement approach have been used widely. In this paper, we propose to combine the two different approaches to further enhance the recognition rates in the noisy speech recognition. For the speech enhancement, the minimum mean square error-short time spectral amplitude (MMSE-STSA) has been adopted and the parallel model combination (PMC) and Jacobian adaptation (JA) have been used as the model compensation approaches. From the experimental results, we could find that the hybrid approach that applies the model compensation methods to the enhanced speech produce better results than just using only one of the two approaches.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2263-2268
• /
• 2010

본 논문은 SDS-TWR(Symmetric Double-Sided Two_Way Ranging)의 Ranging 오차를 보정하여 위치인식 성 능을 향상시키는 방법으로 비컨노드의 거리별 Ranging 오차의 평균 값을 이용하여 Ranging 오차를 보정하는 알고리즘($CA_d$)과, 균등거리비율의 적용으로 Ranging 오차를 보정하는 알고리즘(AEDR)이 적용된 하이브리드형 위치인식 보정 알고리즘($A_{HB}$)을 제안하고, 위치인식 실험을 통해 성능을 분석하였다. 실험결과, $A_{HB}$ 는 전체 32개의 좌표 중 28개 좌표에서 오차 개선이 이루어졌고, 설정한 3개의 오차크기 영역에서 최소한 70%이상의 오차 개선이 이루어졌음을 확인하였다. 또한 32개 좌표에서 발생한 평균 오차 2.67m를 1.19m로 55.4% 보정하였으며 특히 3m 이상의 오차크기 영역에서의 보정 성능은 90% 이상으로 매우 우수함을 확인하였다. 이와 같은 결과를 볼 때, $A_{HB}$ 는 $CA_d$와 AEDR이 각각 수행되었을 때 보다 오차 개선 비율 및 보정 성능이 더 우수함을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.683-686
• /
• 2006

Accompanied by the demand of thin type TV, the application of the TFT LCD display device is more and more extensive. The key material which influences the optical performance of the TFT LCD is optical film. Due to the rapid development of the big size TFT LCD for the recent years, the supply has been unable to meet the demand for its relative material. Therefore, we bring up a alternate choice-the hybrid compensation film which could not only show well optical performance, but also lessen the quantity of usage in TAC in order to make the optical film free of shortage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.101.4-101
• /
• 2002

I. Introduction ▶The PID(Proportional-Integral-Derivative) controller is widely used in the industry it can be implemented easily for a typical second order plant. ▶The parameters of PID controller should be adapted complicatedly if a plant is various or the load is present. ▶For solving the problem, many control techniques have been developed. ▶A major method is a hybrid Fuzzy-PID controller. But, in case of using this method, we can not obtain characteristic of rapidly response and not achieved compensation on disturbance. ▶Therefore, we will use compensator fuzzy controller a front Hybrid type fuzzy-PID controller...

• KDI Journal of Economic Policy
• /
• 제41권2호
• /
• pp.59-79
• /
• 2019

This study analyzes whether mutual fund distributors are more likely to recommend products with higher sales compensation to maximize their profit. The lists of the 'fund of the month' on their webpages are utilized from April of 2015 to August of 2015. A simple comparative analysis shows that the average sales fees and the average front-end load are significantly higher in the recommended funds among the A share class of domestic equity funds. The results of a regression analysis confirm that funds with high sales compensation levels are more likely to be recommended. This holds true for both domestic equity funds and hybrid bond funds even after controlling for fund age, fund size, and past returns.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.134-137
• /
• 2019

A wide-bandwidth current controller is required for fast charging/discharging of super capacitor applications. Peak current mode is generally used to accomplish fast charging/discharging because this mode has fast response characteristics. However, the peak current mode control must have a slope compensation function to restrain sub-harmonics oscillation. The slope must be changed accordingly if the controlled output voltage is varied. However, changing the slope for every changed output voltage is not easy. The other solution, selecting the slope as the maximum value, causes a slow response problem to occur. Therefore, we propose a hybrid mode controller that uses a peak current and a newly specified valley current. Through the proposed hybrid mode control, the sub-harmonic oscillation does not occur when the duty is larger than 0.5 because of the fast response.