• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.107-116
• /
• 2001

A multithreaded model is a hybrid one which combines locality of execution of the von Neumann model with asynchronous data availability and implicit parallelism of the dataflow model. Much researches that have been made toward the advanced performance of multithreaded models are about the cache memory which have been proved to be efficient in the von Neumann model. To use an instruction cache or operand cache, the multithreaded models must have cache memories. If cache memories are added to the multithreaded model, they may have the disadvantage of high implementation cost in the mode. To solve these problems, we did not add cache memory but applied the method of executing the caching by using available registers of the multithreaded models. The available register-based caching method is one that use the registers which are not used on the execution of threads. It may accomplish the same effect as the cache memory. The multithreaded models can compute the number of available registers to be used during the process of the register optimization, and therefore this method can be easily applied on the models. By applying this method, we can also remove the access conflict and the bottleneck of frame memories. When we applied the proposed available register-based caching method, we found that there was an improved performance of the multithreaded model. Also, when the available-register-based caching method is compared with the cache based caching method, we found that there was the almost same execution overhead.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.533-537
• /
• 2004

The experiment was conducted to test the hypothesis that supplementing diets of lactating first parity sows with a mixture of carbohydrases (CS) improves lactation performance and second parity reproductive performance. The CS used in this study contained 7 units/g of $\alpha$-1,6-galactosidase, 22 units/g of $\beta$-1,4-mannanase, $\beta$-1,4-mannosidase and trace amounts of other enzymes. Twenty primiparous sows (Newsham Hybrid) were allotted to either the control group (no CS supplement) or the CS group (0.1% CS supplement) and fed the experimental diets during 21 d lactation period. Sows and nursing pigs were weighed at birth and weekly until weaning. Days of weaning-to-estrus were recorded. Sows had free access to feed and water. Feed intake of sows was measured daily. During the second parity gestation and lactation, all the sows were fed the same gestation and lactation diets and their reproductive performance was measured. During the second parity, there were 14 sows (7 sows per group) remained productive. For the first lactation, maternal body weight loss of the CS group was smaller (p<0.05) than that of the control group. There was no difference in litter weight gain between two groups. Voluntary feed intake of sows did not differ between the two groups. Days of weaning-to-estrus of the CS group were smaller (p<0.05) than those of the control group. In the second parity, there was no difference in the reproductive performance between the two groups. In conclusion, supplementing CS in the diet of lactating sows during the first parity decreased body weight loss and days of weaning-to-estrus of sows. However, these effects of the CS supplementation in the first parity were not successfully carried over to the second parity.

• Archives of design research
• /
• v.9
• /
• pp.801-810
• /
• 1994

Design Problems are often both multidimensional and highly interactive. Very rarely does any part of a designed thing serve only one purpose. The activity of designing is thus a goal-directed activity and normally a goal-directed problem-solving activity. This means, problem solving is finding a way to get from some initial situation to a desired goal. Designers are transforming agents within a society whose goals are to improve the human condition through physical metamorphosis. Many theorist have agreed that designing involves problem solving or decision making. Accordingly evaluation plays an essential role in design activity. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives Alternatives in multi-objective decision prOblems generally possess numerous attributes by which they can be described and compared. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives. However since qualitative factors are difficult to quantify as numeral estimates, these factors have tended to be ignored without regard for their importance to human content. We adapted the Accumulative Evaluation Model as an evaluation algorithm for IDES. Industrial Design Evaluation System (IDES) consists of 3 major modules ( 1 Design Element, 2.Matrix, 3.Evaluation). It is intended to be an aid for design evaluation. The luther thinks IDES is a new design evaluation approach which could provide effective rating of design values to make value judgements. It is an attempt to provide industrial designers with access to design evaluation. The author's aim is to produce an Object-Oriented Evaluation System which can guide the designers and decision makers under complex design projects. It uses\ulcorner an Object-Oriented Programming for this prototype, Because of managing complexity (Flexibility and Reusability) and improving productivity(Extensibility & Maintainability and Programming by User) in software development process. The author has chose the C++ because it is a hybrid, rather than pure Object-Oriented Language.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.74-80
• /
• 2000

In this paper, we proposed the MAC protocol and analyzed the performance for CATV/LAN network which was based upon HFC(hybrid optic coaxial) increased abruptly as alternative method of high speed network. Upstream channel which analyzed very deeply for CATV/LAN network have the preferential access property depending upon that position and unidirectional property. To solve this fairness problem, we propose the CSMA-CD/U/P protocol that transm it as $P_i$ probability although data packets is immediately transmitted when it was occurred. As the analytic result and simulation, we obtained $P_i$ value and its average delay time. Also, we get its variance value and queue length distribution. The mean delay time and queue length increase as the load and number of stations increase in the CATV/LAN network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1900-1911
• /
• 2015

In this paper, we introduce backscatter communication for power-limited sensors to enable long-range transmission in wireless sensor networks, and envision a way to avoid doubly near-far problem in wireless-powered communication network (WPCN) with this technology. In backscatter based WPCN, users harvest energy from both the signal broadcasted by the hybrid access point and the carrier signal transmitted by the carrier emitter in the downlink, and then transmit their own information in a passive way via the reflection of the carrier signal using frequency-shift keying modulation in the uplink. We characterize the energy-free condition and the signal-to-noise ratio (SNR) outage zone in backscatter based WPCN. Further, we propose backscatter based harvest-then-transmit protocol to maximize the sum-throughput of the backscatter based WPCN by optimally allocating time for energy harvesting and information transmission. Numerical results demonstrate that the backscatter based WPCN increases significantly the transmission range and diminishes greatly the SNR outage zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.456-468
• /
• 2008

In this paper, we design Input/Output modules as a preference work for implementation of hybrid two stage AWG based WDM-PON and verify operations of each function modules through the logic simulation. This WDM-PON system provides service to 128 ONUs through 32 wavelength and one wavelength is shared for upstream transmission with four ONU while each wavelength is allocated to each ONU for downstream transmission. The designed WDM-PON MAC chip is based on sub-MAC which consists of one control unit and reception unit and four transmission unit. To design the reception and transmission unit of sub-MAC, we define the functions of the sub-MAC, pins of the modules, control signal and timing of each signal. We intend to design MAC chip with 1Gbps transmission rate. Thus the designed MAC chip is worked on 125MHz clock rate. We define FSM and design Input/Output modules with VHDL. The logic simulation of the modules is executed by the ModelSIM simulator.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.23-30
• /
• 2010

Flash memory is non-volatile and can retain data even after system is powered off. Besides, it has many other features such as fast access speed, low power consumption, attractive shock resistance, small size, and light-weight. As its price decreases and capacity increases, the flash memory is expected to be widely used in consumer electronics, embedded systems, and mobile devices. Flash storage systems generally adopt a software layer, called FTL. In this research, we proposed a new FTL mechanism for overcoming the major drawback of conventional block mapping algorithm. In addition to the block mapping table, a index block mapping table with a small size is used to indicate sector location. The proposed indexed block mapping algorithm by adding a small size. By the simulation result, the proposed FTL provides an enhanced speed than a conventional hybrid mapping algorithm by around 45% in average, and the requirement of mapping memory is also reduced by around 12%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1053-1058
• /
• 2006

In this paper, We proposed a efficient OSA(Optical Sub-Assembly) packaging method in use 1.31/1.49um bi-directional hybrid-integrated PLC chip for low-cost OSA in optical access network system applications as GE-PON in FTTH. Fabricated OSA with passive optical fiber alignment and nonhermetic plastic package method and measured optical coupling efficiency and electric-optical characteristics. Its performance is feasible to satisfy the GE-PON ONU specifications with the results as less than 0.5dB coupling losses within 40um alignment of z-axis and less than -24dBm sensitivity. It also has good temperature characteristics to sustain optical output power more than 1.5mW and 10dB extinction ratio, less than 0.3dB tracking error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1321-1327
• /
• 2009

In this paper, as the mobile communication service is widely used and the demand for wireless repeaters is rapidly increasing because of the easiness of extending service areas. But a wireless repeater has a problem the oscillation due to feedback signal. We proposed a new hybrid interference canceller using the adaptive filter with CMA(Constant Modulus Algorithm)-Grouped LMS(Least Mean Square) algorithm in the adaptive interference canceller. The proposed interference canceller has better channel adaptive performance and a lower MSE(Mean Square Error) than conventional structure because it uses the cancellation method of Grouped LMS algorithm. The proposed detector uses the LMS algorithms with two different step size to reduce mean square error and to obtain fast convergence. This structure reduces the number of iterations for the same MSE performance and hardware complexity compared to conventional nonlinear interference canceller.

• Journal of Industrial Convergence
• /
• v.17 no.2
• /
• pp.15-20
• /
• 2019

The purpose of this study is to provide customized experience learning service platform that enables consumers to easily search for various content information about on - site experiential learning, exhibitions, events, and culture, and to provide services. To provide customized experiential learning information that meets the requirements of the consumer. Beacon technology implemented through this study is a BLE technology that broadcasts a URL in Eddystone format developed by Google. This means that even if a user does not install a separate application, Making it easier and faster to access. Based on this, when the database of local cultural contents is completed, it will be expanded to the whole country, and it is expected that more diverse and high quality self - directed cultural contents experiential learning activity education programs will be provided to consumers by diversifying contents and expanding the market.