• 대한전자공학회논문지SP
• /
• 제48권1호
• /
• pp.23-32
• /
• 2011

본 논문에서는 공간 영역과 정수 DCT 영역을 결합하는 hybrid 영역에서 thumbnail 영상을 생성하는 기법을 제안하다. 제안하는 hybrid domain 방법은 잔여 영상 스펙트럼의 DC 값과 복원된 예측 블록의 평균값을 더하여 thumbnail 영상의 화소 값을 구한다. 또한 본 논문에서는 효율적으로 예측 블록의 평균값을 구하기 위하여 블록의 경계화소만을 복원하는 기법을 제안한다. Bit-stream을 복호한 영상을 축소하여 thumbnail 영상을 생성하는 기존의 방법과 비교하여 제안하는 방법은 동일한 thumbnail 영상을 생성하면서 복잡도를 60% 이상 줄인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2444-2447
• /
• 2008

A new 3D-PTV algorithm (a Volume PTV) based upon a hybrid fitness function has been constructed. A coherency fitness function is introduced using the information of space and time to sort out the correct particle pairs between the two camera images. The measurement system consists of two-high-definition-cameras($1k{\times}1k$), a Nd-Yag laser and a host computer. The developed algorithm has been employed to investigate the flow features of the cylinder wake. The Reynolds numbers with the cylinder diameter (d=10mm) are 360, 720, 900 and 1260. Two-dimensional displacements of the particles of each camera's image and neighbouring constraints were introduced to reduce the calculation loads. More than 10,000 instantaneous 3D vectors have been obtained by the constructed algorithm. The constructed algorithm could recover more than $80{\sim}90%$ of the particle numbers in the image.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.123-126
• /
• 2005

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of low cost lens design and simulation for microdisplay system with 0.6"LCoS panel. Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration. Code V is used and it designed an aspheric lens about exit pupil 6mm, eye relief 20mm and 35 degree of field of view (FOV). With the application this aspheric lens to liquid crystal on silicon (LCOS) type's microdisplay, virtual image showed 50 inch at 2m. One side of the aspheric lens was constituted from diffractive optical element (DOE) for the improvement in a performance. It had less than 2.5% of distortion value and modulation transfer function in axial had 20% of resolution with 32 lp/mm spatial frequency. The optical system is suitable for display of 15.6 mm-diagonal with SVGA.

• 한국컴퓨터정보학회논문지
• /
• 제23권9호
• /
• pp.35-42
• /
• 2018

In this paper, we propose an optimal streaming service method based on Hybrid CDN/P2P architecture. Recently, video streaming utilizes a CDN (Content Delivery Network) operation technique based on a Proxy Server, which is an end node located close to a user. However, since CDN has a fixed network traffic bandwidth and data information exchange among CDNs in the network is not smooth, it is difficult to guarantee traffic congestion and quality of image service. In the hybrid CDN/P2P network, a data selection technique is used to select only the data that is expected to be continuously requested among all the data in order to guarantee the QoS of the user who utilizes the limited bandwidth efficiently. In order to search user requested data, this technique effectively retrieves the storage information of the constituent nodes of CDN and P2P, and stores the new image information and calculates the deletion priority based on the request possibility as needed. Therefore, the streaming service scheme proposed in this paper can effectively improve the quality of the video streaming service on the network.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.607-612
• /
• 2006

In VARTM (Vacuum Assisted Resin Transfer Molding) process, the permeability generally controls the filling time of the resin and it also affects the void characteristics of the fiber composite. In this study, carbon and glass fiber inter-layered hybrid composites (carbon fiber centered stack) with an epoxy matrix were fabricated by VARTM process and evaluated the resin flow and macro void characteristics. The permeability of glass fiber was higher than that of carbon fiber used in this study. Using Darcy's equation, the permeability of hybrid composites could be predicted and experimentally confirmed. After curing, the macro void content of hybrid composites was investigated using image analyzer. The calculated filling time was well agreed with experimental result and the void content was significantly changed in hybrid composites.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.557-562
• /
• 2009

Abrupt change of cross-section in mechanical parts is one of significant causes of structural fracture. In this paper, a hybrid method is employed to analyze the stress distribution of a discontinuous plate. The plate with an inclined crack is utilized in our experiment and the stress field in the vicinity of crack tip is calculated through isochromatic fringe order of given points. This calculation can be made handy through least-squares method integrated with complex power series representation(Laurent series) implemented on a computer program for high-speed processing. In order to accurately compare calculated results with experimental ones, both of actual and regenerated photoelastic fringe patterns are doubled and sharpened by digital image processing. The experiment results show that regenerated patterns obtained by hybrid method are quite comparable to actual patterns.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.91-99
• /
• 1996

A hybrid approach employing both the genetic algorithm and the newton-raphson method is proposed for the electrical impedance computed tomography (EICT) image reconstruction. Computational experiments based on the new concept have shown promising results for several noise-free models. In particular, the resistance distribution of the tested models having resistivity ratio up to 100:1 has been reconstructed sucessfully. Using the proposed mehtod, it is also possible to get the reconstruction by the conventional iterative approaches be difficult to vonverge to a robust solution. If the compution power is enhanced further, the proposed method is expected to stimulate the practical applications of the EICT technology in the near future.

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.45-51
• /
• 1997

To trnsmit moving image signals by using an object vased coding technique at the rate of 8kbps~11kbps, it is very important to minimize the bit rates used for the compression of the color information of MF-objects. This paper proposes a hybrid coding method which uses the shpae adaptive coding method and the interframe reference method selectively. Gilge's shape adaptive orthogonal coidng method is utilized for shpae adaptive coding. The interfarame reference method approximates the low-passed signals of the image by gilge's shpae adaptive orthogonalization method and then refers the approximation error signals from the high frequency signal components of th eprevious frame. The proposed method achives the bit rates reduction of 17% compared to the gilge's shape adaptive orthogonalization method and 30% rduction compared to the shape adaptive DCT in average.

• 한국통신학회논문지
• /
• 제11권6호
• /
• pp.421-429
• /
• 1986

본 논문에서는 Radon변환을 이용한 새로운 복합 패턴인식 시스템을 제안하고, 시뮬레이션을 통하여 성능을 확인하였다. 2차원 영상을 1차원투영데이타로 변환한 후, A/0를 이용하여 1차원 투영 데이터를 Fourier 변환하여 각도에 따른 fourier 스펙트럼을 구하였다. Fourier 스펙트럼 및 투영 데이터로부터 적절한 특징을 추출한 후, 제곱 Mahalanobis거리를 이용하여 패턴을 인식하였다. 시뮬레이션의 결과는 입력패턴으로 선정한 10개의 패턴에 대해서 100%인식율을 보였다.

• 로봇학회논문지
• /
• 제3권1호
• /
• pp.33-41
• /
• 2008

Based on object recognition technology, we present a new global localization method for robot navigation. For doing this, we model any indoor environment using the following visual cues with a stereo camera; view-based image features for object recognition and those 3D positions for object pose estimation. Also, we use the depth information at the horizontal centerline in image where optical axis passes through, which is similar to the data of the 2D laser range finder. Therefore, we can build a hybrid local node for a topological map that is composed of an indoor environment metric map and an object location map. Based on such modeling, we suggest a coarse-to-fine strategy for estimating the global localization of a mobile robot. The coarse pose is obtained by means of object recognition and SVD based least-squares fitting, and then its refined pose is estimated with a particle filtering algorithm. With real experiments, we show that the proposed method can be an effective vision- based global localization algorithm.