• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1451-1456
• /
• 2013

This paper presents the improved zero power levitation control algorithm for a quadruple hybrid EMS (Electromagnetic Suspension) system. Quadruple hybrid EMS system is a united form of four hybrid EMS systems one on each corner coupled with a metal plate. Technical issue in controlling a quadruple hybrid EMS system is the permanent magnet's equilibrium point deviation caused by design tolerance which eventually leads to a limited zero power levitation control that only satisfies the zero power levitation in one or two hybrid EMS system among the four hybrid EMS system. In order to satisfy a complete zero power levitation control of the quadruple hybrid EMS system, the proposed method presented in this paper adds a compensating algorithm which adjusts the gap reference of each individual axe. Later, this paper proves the stability and effectiveness of the proposed control algorithm via experiment and disturbance test.

• Advances in Automotive Engineering
• /
• 제1권1호
• /
• pp.105-121
• /
• 2018

The hybrid electric powertrain is a robust solution that allows for major improvements in both fuel economy and emission reduction. In the present study, a through-the-road hybrid vehicle model with an electric motor driving the rear axle and an Internal Combustion Engine (ICE) driving the front axle has been constructed. We then present a systematic method for the determination of a real time applicable optimal Energy Management Strategy (EMS) for a hybrid road vehicle. More precisely, we compare the performance of rule-based EMS strategies to an optimization-based strategy, namely ECMS (Equivalent Consumption Minimization Strategy). The comparison is conducted in parallel with a parameterization of the size of the internal combustion engine and the implementation of a Continuously Variable Transmission (CVT) that allows following the line of best fuel economy. For the FTP-75 driving cycle, the constrained engine On-off control algorithm is shown to offer a 28% improvement potential of fuel consumption compared to the conventional internal combustion engine while the ECMS strategy achieves an improved potential of nearly 33%.

• 한국지능시스템학회논문지
• /
• 제26권5호
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권1호
• /
• pp.25-32
• /
• 2019

K-BEMS 시스템은 태양광과 배터리를 Hybrid PCS 및 EMS로 구성하여, 건물에너지 절감 및 건물 PEAK 부하를 감축하기 위해 도입되었으며, 200여 한전 사옥에 보급되어 시범 운영되고 있다. K-BEMS 시스템을 보다 안정적으로 그리고 효율적으로 운영하기 위한 K-BEMS 연구과제를 2016년 1월부터 2018년 현재까지 전력연구원이 약 3년간 걸쳐 수행하였다. 본 논문에서는 K-BEMS 연구과제에서 수행한 9가지 Scheduling 운전 모드 시험 결과 및 3년간의 Scheduling 운전 결과 발견한 문제점, 그리고 이 문제점 해결을 위해 도입한 제어 알고리즘을 보여 주고 있다. K-BEMS 9가지 Scheduling 자동제어 운전모드 시험을 수행 하였으며, 이 중 3가지 운전모드에서 알고리즘 개선 사항을 발견하였는데, 이들 3가지 경우 모두 배터리 연계 운전과 관련이 있는 것으로 드러났다. 배터리 SOC(State of Charge)는 통상 20% 이상에서 운전되는데, 20% 이하가 되면 배터리 보호 차단기가 동작하여 K-BEMS 자동 운전이 정지되는 현상을 발생한다. 그런데 이 Hybrid 자동제어 모드에서, 배터리 차단기 trip시 태양광 공급마저 중단되는 현상을 발견하였다. 그러므로, Hybrid 공급모드에서 배터리의 차단기가 동작될 경우, 태양광 단독운전으로 자동 전환하여 태양광 공급마저 중단되지 않도록 알고리즘을 재구성하여 자동제어 운전하는 것이 총 에너지 절감 측면에서 반드시 필요한 것으로 분석되었다. 이 때, 계측제어 오차를 감안하여야 하며, 배터리 정지를 너무 보수적으로 의식하여, SOC 운전 Range를 너무 축소해서 운전하면 당초의 피크 부하 저감 이라는 경제성 목표를 달성할 수 없으므로, 효과적인 hybrid 운전(건물 피크 부하 감축 운전)을 위해서는 정지된 SOC 값을 컴퓨터가 기억하고 있다가, 향후 재가동 자동제어 운전시에서는 SOC Range값을 변경 조정 하여 최적 제어 운전하는 자동제어 알고리즘이 PV & Battery hybrid peak load demand control에서 반드시 필요한 것으로 나타났다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권3호
• /
• pp.1-4
• /
• 2011

This paper deals with the design and fabrication of prototype superconducting hybrid electromagnet(SH-EM) for EMS (Electromagnetic suspension)-based Maglev. The design requirements are based on the normal conducting EM used in the German high-speed Maglev. From the MMF-Levitation force curves simulated by FEM analysis, the required MMF by superconducting coil is suggested. As an experimental test setup to demonstrate the SH-EM, the experimental SH-EM with HTS coil cooled in $LN_2$ is fabricated. From the expected operating current of the HTS coil, the levitation performance of the SH-EM is estimated.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.610-618
• /
• 2020

본 논문에서는 규칙기반 알고리즘을 이용한 수소연료전지/배터리 하이브리드 철도차량 모델링을 제시한다. 모터의 운전영역에 따른 토크 곡선을 계산하여 견인 시스템의 구동 전력을 결정하고 철도차량의 각 운전 모드에 적용하여 전기 시스템을 모델링 한다. 전기 시스템의 전력은 규칙기반 알고리즘을 이용한 에너지 관리시스템(Energy Management System, EMS)으로 결정한다. 배터리의 충전상태(State Of Charge, SOC)에 따라 운전 영역을 세분화하여 수소 소비량을 효율적으로 관리한다. 제안하는 철도차량 모델링의 타당성은 MATLAB/Simulink 시뮬레이션을 통해 검증한다.

• 한국인공지능학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2024

This paper introduces a novel approach to time-series estimation for energy load forecasting within Virtual Power Plant (VPP) systems, leveraging advanced artificial intelligence (AI) algorithms, namely Long Short-Term Memory (LSTM) and Seasonal Autoregressive Integrated Moving Average (SARIMA). Virtual power plants, which integrate diverse microgrids managed by Energy Management Systems (EMS), require precise forecasting techniques to balance energy supply and demand efficiently. The paper introduces a hybrid-method forecasting model combining a parametric-based statistical technique and an AI algorithm. The LSTM algorithm is particularly employed to discern pattern correlations over fixed intervals, crucial for predicting accurate future energy loads. SARIMA is applied to generate time-series forecasts, accounting for non-stationary and seasonal variations. The forecasting model incorporates a broad spectrum of distributed energy resources, including renewable energy sources and conventional power plants. Data spanning a decade, sourced from the Korea Power Exchange (KPX) Electrical Power Statistical Information System (EPSIS), were utilized to validate the model. The proposed hybrid LSTM-SARIMA model with parameter sets (1, 1, 1, 12) and (2, 1, 1, 12) demonstrated a high fidelity to the actual observed data. Thus, it is concluded that the optimized system notably surpasses traditional forecasting methods, indicating that this model offers a viable solution for EMS to enhance short-term load forecasting.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.84-91
• /
• 2010

Owing to revolutionary developments in automobile technologies, a variety of advanced vehicles - hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc. - emerges recently. The safety is getting more important for developing automobiles. The electro-magnetic compatibility has to be assured, since those advanced vehicles are equipped with various new electronic systems. Electro-magnetic compatibility tests, in general, consist of an EMI(electro-magnetic interference) test and an EMS (electro-magnetic susceptibility) test. We investigated the susceptibility test method suggested in KMVSS (Korean Motor Vehicle Safety Standard) as the EMS test method. A series of experiments results that the above test method should be partially revised to comply with a Korean governmental standard method. In this paper, the some directions of modifications are presented to enhance the quality of the above EMS test method.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1763-1769
• /
• 2007

To improve the cycle-life and efficiency of an energy storage system for HEV, a dynamic control system consisted of a switch between a battery and an ultracapacitor module is proposed, which is appropriate for mild hybrid vehicle with 42V power net. The switch can be controlled based on the status of the battery and the ultracapacitor module, and a control algorithm that could largely decrease the number of high charging current peak is also implemented. Therefore the cycle life of the battery can be improved such that it is suitable for a mild hybrid vehicle with frequent engine start-stop and regenerative-braking. Also, by maximizing the use of the ultracapacitor, the system efficiency during high current charging and discharging operation is improved. Finally, this system has the effects that improves the efficiency of energy storage system and reduces the fuel consumption of a vehicle. To verify the validity of the proposed system, this paper presented cycles test results of different energy storage systems: a simple VRLA battery, hybrid energy Pack (HEP, a VRLA battery in Parallel with Ultracapacitor) and a HEP with a switch that controlled by energy management system (EMS). From the experimental result, it was proved the effectiveness of the algorithm.

• 한국인터넷방송통신학회논문지
• /
• 제19권2호
• /
• pp.187-192
• /
• 2019

수요관리와 정전에 대한 비상전원 기능을 갖춘 하이브리드 전력저장시스템으로 비상발전설비가 필요한 빌딩 및 공장건축 시에 투자비를 최소화하고, 상시 전력비를 절감함으로서 경제성을 확보할 수 있 기술을 개발함으로써 새로운 비즈니스 모델을 제시한다. 평상시에 STS(Static Transfer Switch)를 통해 부하에 계통 전력을 공급하고 PCS는 계통에 병렬로 연계되어 수요관리를 수행한다. EMS는 수요예측을 통한 전력의 효율적 운용을 위해 ESS에 충방전 지령을 PMS(Power Management System)로 하달하고 PMS는 다시 PCS 제어기로 지령을 전달하여 시스템을 운용한다. 정전시에는 STS가 계통으로부터 빠르게 이탈되면서 PCS는 독립 전원이 되어 부하 측에 정전압/정주파수의 전력을 공급할수 있는 구조이다. 따라서 하이브리드 ESS에 대한 실 계통 연계 및 독립 운전 성능 검증을 통한 신뢰성을 확보할수 있고, 저탄소 녹색성장 기술의 효율적 전력망과 연계 운영이 가능하게 함으로써 ESS 연계를 통한 신재생에너지 발전에 의한 불규칙한 전력 품질개선, 피크부하 기여도 제고가 가능하다. 또한 현재 석탄 화력이 담당하고 있는 주파수추종 예비력을 ESS로 대체함에 따라 연료비가 높은 LNG 발전기 가동비용을 절감할 수 있는 기대효과가 있다.