• 국제지역연구
• /
• 제12권3호
• /
• pp.89-109
• /
• 2008

마케팅 경로 관리에 있어서 하이브리드 경로를 활용할 때는 경로 통제 잇점(직접경로)과 경로 관리의 유연성(간접경로)을 동시에 기대할 수 있다. 그러나 동시에 거래 당사자들의 다양한 이질적 기대치와 우선적 권리 확보 성향과 충돌할 수 있는 위험에 노출되게 된다. 따라서, 본 연구는 하이브리드 경로 관리의 비용과 편익에 대한 이해를 높이고자 시작된 것이며, 특히 패션의류시장에서 빈번히 활용되는 하이브리드 마케팅 경로, 당사자 간의 상호 지배문제, 상호 갈등문제 그리고 경로 관리 효율성을 높이고자 수행된 것이다. 이를 위해, 첫째, 기업간 지배 및 기업내 지배 문제를 통해 마케팅 경로 관리를 분석하고 나아가 판매원(샵마스터)관리 문제를 통합하여 분석하고자 한다. 둘째, 본 연구에 제시된 하나의 개별 틀 속에서 경로 지배관련 두 관점을 하나로 통합하여 추후 연구토대를 제시하고있다. 패션의류 메이커와 소매업자간의 경로 관계를 축으로 실증 조사된 결과, 본 연구에서 제시된 이론적 가설이 긍정적으로 뒷받침 되고 있다.

• 산업공학
• /
• 제18권4호
• /
• pp.504-511
• /
• 2005

The NP-hard channel assignment problem becomes more and more important to use channels as efficiently as possible because there is a rapidly growing demand and the number of usable channel is very limited. The hybrid genetic and local search (HGLS) method in this paper is a hybrid method of genetic algorithm with no interference channel assignment (NICA) in clustering stage for diversified search and local search in tuning stage when the step of search is near convergence for minimizing blocking calls. The new representation of solution is also proposed for effective search and computation for channel assignment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.434.2-434.2
• /
• 2014

We observe enhanced pH response of solution-gated field-effect transistors (SG-FET) having 1D-2D hybrid channel of vertical grown ZnO nanorods grown on CVD graphene (Gr). In recent years, SG-FET based on Gr has received a lot of attention for biochemical sensing applications, because Gr has outstanding properties such as high sensitivity, low detection limit, label-free electrical detection, and so on. However, low-defect CVD Gr has hardly pH responsive due to lack of hydroxyl group on Gr surface. On the other hand, ZnO, consists of stable wurtzite structure, has attracted much interest due to its unique properties and wide range of applications in optoelectronics, biosensors, medical sciences, etc. Especially, ZnO were easily grown as vertical nanorods by hydrothermal method and ZnO nanostructures have higher sensitivity to environments than planar structures due to plentiful hydroxyl group on their surface. We prepared for ZnO nanorods vertically grown on CVD Gr (ZnO nanorods/Gr hybrid channel) and to fabricate SG-FET subsequently. We have analyzed hybrid channel FETs showing transfer characteristics similar to that of pristine Gr FETs and charge neutrality point (CNP) shifts along proton concentration in solution, which can determine pH level of solution. Hybrid channel SG-FET sensors led to increase in pH sensitivity up to 500%, compared to pristine Gr SG-FET sensors. We confirmed plentiful hydroxyl groups on ZnO nanorod surface interact with protons in solution, which causes shifts of CNP. The morphology and electrical characteristics of hybrid channel SG-FET were characterized by FE-SEM and semiconductor parameter analyzer, respectively. Sensitivity and sensing mechanism of ZnO nanorods/Gr hybrid channel FET will be discussed in detail.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.418-429
• /
• 2016

In this paper, we propose a hybrid Wyner-Ziv video coding structure that combines conventional motion predictive video coding and Wyner-Ziv video coding to eliminate the feedback channel, which is a major practical problem in applications using the Wyner-Ziv video coding approach. The proposed method divides a hybrid frame into two regions. One is coded by a motion predictive video coder, and the other by the Wyner-Ziv coding method. The proposed encoder estimates side information with low computational complexity, using the coding information of the motion predictive coded region, and estimates the number of syndrome bits required to decode the region. The decoder generates side information using the same method as the encoder, which also reduces the computational complexity in the decoder. Experimental results show that the proposed method can eliminate the feedback channel without incurring a significant rate-distortion performance loss.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.342-345
• /
• 2004

An efficient hybrid ARQ scheme based on the rate compatible block turbo codes has been proposed, and its performance has been analyzed. System efficiency is improved by means of adaptive rate code transmission using channel information, trading off bit rate for channel codes, with resulting energy saving. The rate adaptation scheme improves power efficiency while keeping packet delay minimized. On the other hand, power dependant strategies reduce power consumption. Simulation results show that the benefits obtained are very encouraging. The modified hybrid ARQ schemes with the channel information and efficient retransmission structures highly improve the throughput performance in the satellite communication system. Therefore, proposed schemes could be used in future communication systems.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1689-1699
• /
• 2006

A nonlinear channel blind equalizer by using a hybrid genetic algorithm, which merges a genetic algorithm with simulated annealing, and a RBF network is presented. In this study, a hybrid genetic algorithm is used to estimate the output states of a nonlinear channel, based on the Bayesian likelihood fitness function, instead of the channel parameters. From these estimated output states, the desired channel states of the nonlinear channel are derived and placed at the center of a RBF equalizer to reconstruct transmitted symbols. In the simulations, binary signals are generated at random with Gaussian noise. The performance of the proposed method is compared with those of a conventional genetic algorithm(GA) and a simplex GA, and the relatively high accuracy and fast convergence of the method are achieved.

• 한국지능시스템학회논문지
• /
• 제23권6호
• /
• pp.487-493
• /
• 2013

스마트 기기의 보급 확대로 다양한 콘텐츠를 서비스하는 이동 단말기의 한정된 채널 할당 문제가 심화되고 있다. 이동통신망에서는 이동국에서 채널할당 요청이 있을 때 교환국에서 각 기지국에 속한 이동국에 채널을 할당한다. 이 때 한정된 채널을 효과적으로 할당하기 위한 다양한 방식들이 제안되고 있는데, 여기서는 하이브리드 채널 할당에 유전 알고리즘을 이용한 UHGA(Universal Hybrid Channel Assignment using Genetic Algorithm)이 농촌 지역이나 도심 지역과 같은 다양한 환경의 범용 망에 적용되어 효율성이 있음을 시뮬레이션을 통해 검증한다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권3호
• /
• pp.259-265
• /
• 2004

In this study, a hybrid genetic algorithm merged with simulated annealing is presented to solve nonlinear channel blind equalization problems. The equalization of nonlinear channels is more complicated one, but it is of more practical use in real world environments. The proposed hybrid genetic algorithm with simulated annealing is used to estimate the output states of nonlinear channel, based on the Bayesian likelihood fitness function, instead of the channel parameters. By using the desired channel states derived from these estimated output states of the nonlinear channel, the Bayesian equalizer is implemented to reconstruct transmitted symbols. In the simulations, binary signals are generated at random with Gaussian noise. The performance of the proposed method is compared with those of a conventional genetic algorithm(GA) and a simplex GA. In particular, we observe a relatively high accuracy and fast convergence of the method.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.298-303
• /
• 2013

Magnetic abrasive polishing is one of the most promising finishing methods applicable to complex surfaces. Nevertheless this process has a low efficiency when applied to very hardened materials. For this reason, EP-MAP hybrid process was developed. EP-MAP process is expected to machine complex and hardened materials. In this research, deburring process using EP-MAP hybrid process was proposed. EP-MAP deburring process is applied to micro channel, thereby it can obtain both deburring process and polishing process. EP-MAP deburring process on the micro channel was performed. Through design of experiment method, error of height in this process according to process parameter is analyzed. When the level 1 parameter A(magnetic flux density) and level 2 parameter B(electric potential), C(working gap) and level 3 parameter D(feed rate) are applied in the deburring process using EP-MAP hybrid process, it provides optimum result of EP-MAP hybrid deburring process.

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.81-86
• /
• 2004

부호분할다중접속(CDMA: Code Division Multiple Access) 시스템의 역방향링크에서 수신 빔 성형 기법을 사용할 경우, 빔 성형 이득을 얻는 반면 전력 제어에 의해 불충분한 파일롯 전력으로 인해 채널 추정이 부정확해진다. 이 논문에서는 상관된 단일-입력 다중-출력(SIMO: Single-Input Multiple-Output) 채널에서 불충분한 파일롯 전력으로 인한 문제를 해결하기 위한 수신 빔 성형 방식을 제안하고자 한다. 제안된 복합형 빔 성형 방식(hybrid beamformer)은 수신 안테나들을 그룹 지어서, 각 그룹 당 수신 빔 방향(DOA: Direction-of-Arrival) 기반의 빔 성형 후에, 그룹별 출력을 최대 비 결합(MRC: Maxim Ratio Combining)하는 방식으로, 공간적으로 상관된 SIMO 채널의 디버시티 이득을 얻으면서 더 정확한 채널추정과 간섭제거 효과를 제공한다. 배열 안테나의 수가 여섯 개 이상인 경우, 복합형 빔 성형 방식은 빔 수신 각 범위(AOS: Angle-of-Spread)가 30°이하에서 일반적인 MRC 빔 성형 방식보다 더 좋은 성능을 보인다.