• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.352-359
• /
• 1999

This paper is a research for removing the alternators hunting which came about during the par-allel running. The four-pole six-phase alternator is equipped with the converter made out of twelve diodes to rectify all the waves. The hunting came about during the battery charging due to the hunting inducing point existed in r. p. m band 1575[rpm-1690[rpm] To remove the hunting inducing point We modified the four-pole six-phase alternator into the four-pole twevel-phase and increased the short-circuit ratio by decreasing the field coil pitch and increasing the field coil turns. But this method has two defects the first the alternator structure becomes complicating and the second the second the alternator equipped with the converter used in general purpose lately such as the car alternator can not be run in parallel wlthout modifying. To remove the defects the equalizing line was connected between the same phase of the alterna-tor to flow the synchronizing current which syncronize the phases of generator electromotive forces by which the alternator can be run in parallel without reference to the hunting inducing point and without modifying.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.346-354
• /
• 2001

This study was conducted to investigate the status and problems, and suggest the proper improvement of provincial rotation hunting system in Korea. There were many problems in recently provincial rotation hunting system, such as, difficulty of budget interiority, low participation rate of hunters, low specialization degree of officers on their job, and extremity of illegal capture of wildlife by the absence of wildlife manager. The municipal hunting system, which have many merits, such as, increase of hunters' participation and income of municipality, creation of engagement, and prohibit of illegal capture of wildlife would be suggest for the improvement of hunting system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.449-455
• /
• 2012

During the measurement of the flow rate of gases such as natural gas, flow hunting is observed in most orifice meters but the intensity of flow hunting at each metering system shows different characteristics. In order to investigate why such a difference occurs and whether the difference actually influences metering error, pipeline network analysis on the main factors and characteristics of flow hunting was carried out in a previous study. Following this, in this study, computational fluid dynamics (CFD) analysis was carried out to clarify the relation between flow instability and flow hunting and determine the factors influencing the orifice meter depending on the intensity of upward pressure fluctuation, time interval, and flow rate. Finally, we showed that the pressure hunting rate is a function of the ratio of the pressure difference before and after an orifice meter. On the basis of CFD analysis results, we also presented some major factors and relations influencing flow hunting.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.327-334
• /
• 1999

A multiple-satisfaction approach was used to determine hunting satisfaction. A sample of 1000 hunters was surveyed via mail questionnaire. Principal component analysis revealed six dimensions of hunting satisfaction : harvest, equipment, nature, skill, escapism, and social contact. Among these factors, items related nature were evaluated as the most important to their hunting satisfaction. Correlations between specialization variables (past experience, days participated in hunting, and perceived level of hunting skill) and each factor derived were examined. This study also investigated any differences in hunting satisfaction due to personal variables such as age, education, and place of residence. The results of this study indicated that no differences, except age and hunting skill, were found between the two variables.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.807-816
• /
• 2018

Threat hunting is defined as a process of proactively and iteratively searching through networks to detect and isolate advanced threats that evade existing security solutions. The main concept of threat hunting is to find out weak points and remedy them before actual cyber threat has occurred. And HMM(Hunting Maturity Matrix) is suggested to evolve hunting processes with five levels, therefore, CSOC(Cyber Security Operations Center) can refer HMM how to make them safer from complicated and organized cyber attacks. We are developing a system for cyber situation awareness system with pro-active threat hunting process called unMazeTM. With this unMaze, it can be upgraded CSOC's HMM level from initial level to basic level. CSOC with unMaze do threat hunting process not only detecting existing cyber equipment post-actively, but also proactively detecting cyber threat by fusing and analyzing cyber asset data and threat intelligence.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.285-286
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.541-542
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.825-826
• /
• 2007

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.68-73
• /
• 1998

The propulsion diesel engine have been widely applied with a mechanical governor to control the truck speed for a long time. But it was recently very difficult for mechanical governor to control the speed of long stock and diesel engine of truck because of hunting by dead time between fuel injection and power output. This study is aimed to configure the modeling for performance simulation regarding to diesel truck operation which could be suppressed for hunting. The modeling have been made on the base of dynamic characteristic such as electronic governor, injection of fuel system and operating states of diesel engine truck. Real model system have been introduced for deciding reacting parameters and for the comparison of resulting performance in simulation. In results of simulation, we obtained items which diesel truck drives for suppressed hunting.

• Journal of the Korean Society of Costume
• /
• v.57 no.4 s.113
• /
• pp.1-8
• /
• 2007

In the decade of the 1920s in an America, with booming of economy, people had more money. And with the development of transportation, people can afford expensive traveling throughout Europe. With this reason they were exposed to a nobility of European style and liked royalty more than before. American hunting man wanted traditional dress to express their status as a psychological code and the reason of the existing very similar hunting garment in nowadays is based on this belief. The purpose of this study is not merely understanding the styles of American Men's hunting and shooting garments in the 1920s but understanding the psychology of the people. People quite clearly do not dress according to function ore need alone and, in fact the consumption of clothes increasingly serves no other purpose than to fulfill or express psychological or social, rather than practical need.