• Corrosion Science and Technology
• /
• 제8권6호
• /
• pp.223-226
• /
• 2009

Polymer coatings are commonly applied to metal substrates to prevent corrosion in aggressive environments such as high humidity and under salt water. Once the polymer coating has been breached, for example due to cracking or scratches, it loses its effectiveness, and corrosion can rapidly propagate across the substrate. The self-healing system we will describe prevents corrosion by healing the damage through a healing reaction triggered by the actual damage event. This self-healing coating solution can be easily applied to most substrate materials, and our dual-capsule healing system provides a general approach to be compatible with most common polymer matrices. Specifically, we expect an excellent anti-corrosion property of the self-healing coatings in damaged parts coated on galvanized metal substrates.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권4호
• /
• pp.425-432
• /
• 2007

This paper describes a development of ship's refer-container remote monitoring system(RRMS). This system consists of Master, repeater with a switched mode power supply(SMPS) and slave terminal. Slave terminal is composed of wireless MODEM and microprocessor part, checks its conditions like temperature. humidity & etc through the interrogate port(IP) of refer-container. and transmits their data to master. Repeater's role is that connect so that signal which is transmitted from Slave Terminal by Master may not receive electric wave interference by container boxes. We verify the effectiveness of proposed system through the experimental works in container yard and ship.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.123-128
• /
• 2018

When the injection molding system molds some plastic products, defective product rate will be increased if plastic materials have some excessive moisture content. Therefore, it is very important to control the dehumidification and drying of plastic material. Since the moisture content of the plastic material may change from time to time depending on the material and the molding process, it is necessary to observe the change in real time and maintain a constant moisture content. To solve these problems, I proposed a smart factory system model for plastic molding in this paper. In addition, I designed the interface module to be installed in the dehumidifying dryer which is the core of this process. In addition to this, performance tests were conducted to check the effectiveness and the results were verified as valid.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.701-704
• /
• 2014

본 논문에서는 음료 판매 데이터 분석 및 판매량을 예측하는 방법을 제안하고자 하였다. 이를 위해 날씨와 음료 판매량이 상관관계가 있다고 가정하고, 온도, 습도를 입력으로 하여 판매량을 출력으로 하는 다항식 함수 관계를 모델링하였다. 본 논문에서는 제안한 방식의 유용성을 확인하기 위해 카페의 음료 판매 데이터를 2014년 2월부터 약 4개월 동안 수집하였고, 판매량 예측 알고리즘의 성능이 우수함을 확인하였다.

• 감성과학
• /
• 제18권2호
• /
• pp.45-54
• /
• 2015

본 연구에서는 LED 광원에 대하여 재실자의 업무 효율성과 에너지 저감 효과를 알아보기 위한 실험을 실시하였다. 이를 위해 LED 광원의 특성인 펄 스 폭변조(PWM, pulse width modulation)와 조도(lux)를 제어하여 총 9가지의 다양한 조명환경을 구성하였다. LED 조명의 펄스변조 비율은 각각 R:G:B=1:1:1, R:G:B=4:1:5, R:G:B=8:7:7으로 하였으며, 조도는 각각 400 lx, 700 lx, 1000 lx 으로 설정하였다. 또한, 실내환경은 온도 $20{\sim}24^{\circ}C$, 습도 50~60%, 착의량 1 clo 로 설정하였다. 각각의 주어진 9개의 조명환경에서 업무 효율성과 에너지 소비에 대해 분석하였다. 업무 효율성 분석을 위해 오류검색수정 작업을 실시하였으며, 에너지 소비 분석을 위해 각 조명환경에서 누적 소비전력을 측정하였다. 제안한 조명환경을 통해 실험한 결과, 업무 효율성은 400 lx 보다 700 lx 이상에서 정확도 및 소요시간의 효율이 좋았으며, 소요시간의 경우 제안한 펄스변조 R:G:B=8:7:7 에서 가장 좋은 효율을 나타냈다. 또한, 각각의 조도에 대한 소비전력은 펄스변조 R:G:B=8:7:7 > RGB=1:1:1 > R:G:B=4:1:5의 순으로 낮게 나타났다. 따라서, 본 논문에서 제안한 펄스 폭 변조 효과가 업무효율성 및 에너지 저감에 영향을 미치는 것을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제5권1호
• /
• pp.33-42
• /
• 1980

This study was carried out to investigate the actual environmental paddy storage conditions in conventional Korean farm warehouses. The paddy storage conditions by the locations and sizes of warehouses were figured out. The effectiveness of the small insulated box for storing paddy was also examined. Observations were made at sixteen different warehouses located in Moonsan-Myeon, Jinyandg-gun, Gyungnam Province from July lst to September 28 th, the period which was considered to be the worst for storing grains. The results are as follows ; 1. the average temperatures of rough rice and air inside the warehouse were 0.9 and 0.7$^\circ$ higher than the outside air temperature. 2. The average relative humidity in warehouses was 1.5percent higher than that of the atomosphere. This fact resulted in the increased moisture content of grains. Therefore, the ventilation for equalizing the relative humidity of inside and outside of warehouses was required. 3. The dry matter of stored rough rice was decreased by 1.1 percent in average druing the observation period. In order to reduce the dry matter loss, application of new grain storing method ;hermetic storage or filling inert gas storage, was highly recommended. 4. Environmental conditions for storing rough rice in a warehouse located in a sloping site are, in general , better than those of a warehouse located in a flat site. But as far as the dry matter of rough rice was concerned, above situation is not always satisfactory. Because it is fairly frequent to observe the higher rate of moisture absorption by grains stored in a warehouse located in a sloping site. 5. Environmental conditions for storing rough rice in a large-scale warehouse were better than those in a small size warehouse. Therefore, it is advisible for farmers to store their grins in the large-scale warehouses commonly used by villagers. 6. It was undesirable to store rough in a insulated box.

• International journal of advanced smart convergence
• /
• 제6권1호
• /
• pp.76-81
• /
• 2017

This paper presents a low cost and flexible IoT enabled smart LED controller using Arduino that is used for emergency exit signs. The Internet of Things (IoT) is become a global network that put together physical objects using network communications for the purpose of inter-communication of devices, access information on internet, interaction with users as well as permanent connected environment. A crucial point in this paper, is underlined on the potential key points of applying the Arduino platform as low cost, easy to use microcontroller with combination of various sensors applied in IoT technology to facilitate and establishment of intelligent products. To demonstrate the feasibility and effectiveness of the system, devices such as LED strip, combination of various sensors, Arduino, power plug and ZigBee module have been integrated to setup smart emergency exit sign system. The general concept of the proposed system design discussed in this paper is all about the combination of various sensor such as smoke detector sensor, humidity, temperature sensor, glass break sensors as well as camera sensor that are connected to the main controller (Arduino) for the purpose of communicating with LED exit signs displayer and dedicated PC monitors from integrated system monitoring (controller room) through gateway devices using Zig bee module. A critical appraisal of the approach in the area concludes the paper.

• 한국인터넷방송통신학회논문지
• /
• 제18권1호
• /
• pp.1-8
• /
• 2018

도시철도의 이용량이 매년 증가하고 있으며 승객들의 불편한 사항들 또한 이에 비례하여 증가하고 있다. 하지만 철도 관계자들은 해당 민원사항들에 대해 신속하게 조치하지 못하고 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 철도 관계자들과 승객들 간의 소통을 원활하게 하고 이로 인한 신속한 처리를 수행하기 위한 사물인터넷 기반의 IOS 어플리케이션을 제안한다. 본 제안 시스템에서는 전동차량 내에 온습도 센서를 적합한 장소에 설치하고 이렇게 측정된 측정치를 실시간으로 원격 서버에 전송함과 동시에 승객들은 자신의 희망온도를 IOS 기기 어플리케이션을 통하여 요청하도록 하였다. 이렇게 수집된 데이터들을 기반으로 실시간 도시철도 관계자들이 전동차량의 온습도를 조절할 수 있는 시스템을 제안한다. 제안 시스템은 광주광역시 도시철도 1호선에 구현을 통하여 그 효율성을 검증하였다.

• 식물병연구
• /
• 제21권2호
• /
• pp.45-49
• /
• 2015

Seeds of wheat (Triticum aestivum L. cv. Olgeurumil) were infected with Penicillium sp. at mean infection rate of 83%. Penicillium sp. was detected in endosperm with bran but not in embryo. Gaseous chlorine dioxide ($ClO_2$) effectively inhibited growth of Penicillium sp. at concentration of 5 to $20{\mu}g/ml$. As treatment duration was extended from 1 to 3 h, growth of Penicillium sp. was completely suppressed even at $10{\mu}g/ml$. There was no significant reduction in the incidence of Penicillium sp. at 30% relative humidity (RH). However, the incidence of Penicillium sp. was 27.7% at 50% RH, further those were 3.5% and 0.2% at 70% and 80% RH, respectively. Seed germination was not affected by $ClO_2$ treatment at all the RH conditions. Water-soaked seeds (30% seed moisture content) showed a drastic reduction in the incidence of Penicillium sp. when treated at more than $10{\mu}g/ml$ of $ClO_2$. The incidences of Penicillium sp. were 3.3, 1.8 and 1.2% at 10, 15 and $20{\mu}g/ml$, respectively. The incidence of Penicillium sp. in dry seeds with 9.7% seed moisture content did not reduce when treated with 5 and $10{\mu}g/ml$ at 50% RH although it tended to decrease as $ClO_2$ concentration increased to $20{\mu}g/ml$. Seed germination was not affected by $ClO_2$ treatment at the tested concentrations. These results indicated that gaseous $ClO_2$ was effective disinfectant to wheat seeds infected with Penicillium sp. and that the effectiveness of $ClO_2$ strongly increased when moisture content around or inside of the seed was increased.

• 신재생에너지
• /
• 제17권2호
• /
• pp.50-58
• /
• 2021

We proposed an MEA development methodology that accurately measures intrinsic MEA performance while considering the uneven reaction environments formed inside a large-area BP. To facilitate measurement of the inherent MEA performance, we miniaturized the active area of the MEA to 3 cm², and prepared two MEAs with different ionomer contents of 0.65 and 0.80 (I/C). By simulating the operating conditions of a 100 cm² BP at the inlet (I), center (C), and outlet (O), the oxygen concentration and relative humidity were determined to be 20.7, 13.8, 11.7%, and 50, 66.1, and 70.1% respectively. We measured the performance and electrochemical analysis of the prepared MEAs under the three simulated conditions. Based on the results of statistical analysis of the evaluated MEA performance data, I/C 0.65 MEA had a higher average performance and lower performance deviation than I/C 0.80 MEA. Hence, it can be concluded that an I/C 0.65 MEA is a more effective MEA for large-area BP. Based on the above research process, we confirmed the effectiveness of the proposed MEA development methodology.