• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.260-268
• /
• 2018

The aim of this study was to evaluate the effect of light quality using either monochromatic or combined LEDs on the growth and antioxidant accumulation of Agastache rugosa cultivated under hydroponics for 4 weeks. This experiment was performed in a controlled-environment room at $22{\pm}1^{\circ}C$ and $18{\pm}1^{\circ}C$ (day and night temperatures, respectively) and 50-70% relative humidity, with a provided photosynthetic photon flux density (PPFD) of $180{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and irradiated with either monochromatic (W10 and R10) or mixed LEDs (W2B1G1, R3B1, R2B1G1, and W2B1G1) with a differing ratio of each LED's PPFD and fluorescent lighting (FL: control) with a 16/8 h photoperiod. Fresh and dry weights were highest for plants grown under the W2B1G1 treatment. A. rugosa grown with R10 had the greatest plant height but the lowest SPAD among all treatments. The concentration of rosmarinic acid in plants grown under W2B1G1 was significantly higher than that of plants grown under other treatments. Tilianin content was significantly higher in R3B1 than in the other treatments. However, whole-plant rosmarinic acid and tilianin content was the highest under the W2B1G1 condition. To cultivate A. rugosa in a plant factory, mixed-LED light conditions with W2B1G1 is considered to be more advantageous for the growth and antioxidant accumulation of A. rugosa. It is though that the total whole-plant antioxidant content is more crucial for commercial use; the present study demonstrates the potential to achieve higher content of functional materials in plants through the selection of light quality.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.312-318
• /
• 2018

We investigated the effect of postharvest treatments of calcium chloride, lysophosphatidyl ethanolamine (LPE) or 1-methylcyclopropene (1-MCP) on fruit quality during simulated marketing in Asian pear (Pyrus pyrifolia Nakai). 'Whangkeumbae' pear fruits were immersed in 0.25, 0.5 or 1.0% $CaCl_2$ solution with or without ultrasound (40kHz) at $25^{\circ}C$ for 3min followed by storage at $1^{\circ}C$ for 30 days simulated as abroad exportation. After simulated marketing at $25^{\circ}C$ and 80% relative humidity (RH) up for 10 days, quality parameters were evaluated. Results indicated that the ultrasound and $CaCl_2$ treatment had a synergic effect on keeping the green skin color which showed lower $a^*$ value. The combination treatment of ultrasound and 0.5% and 1.0% $CaCl_2$ significantly reduced internal browning disorders, although severe skin blemish disorder (20-23%) occurred in 1.0% $CaCl_2$ treatment. 'Wonhwang' pears were immersed in 1,000ppm LPE for 3 minutes or were fumigated in 1,000 ppb 1-MCP for 12 hours, respectively. The results of the fruit quality survey during the 21 days of distribution period are as follows. The 1-MCP treatment was maintained at a constant flesh firmness of 33N or higher during the distribution period. The LPE treated fruits had a lower physiological disorder index than the untreated group, but showed a relatively higher value than the 1-MCP treated group. In the case of 1-MCP treatment, the fruit respiration rate was significantly lower than of untreated control ($6.0mL{\cdot}kg^{-1}{\cdot}hr^{-1}$) during the simulaed marketing period. Consequently, it was expected that the postharvest treatments of 0.5% calcium chloride in pararell with ultrasound and 1-MCP fumigation can help to maintain Asian pear quality during distribution period.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.331-338
• /
• 2020

This study was conducted to cultivate new Lepista nuda varieties with shorter cultivation period and better fruiting body compared to that of wild strains, for mass production and commercial application. Eighteen genetic resources of L. nuda were collected and grown in boxes using rice straw-fermented growth medium. Four lines with fruiting bodies were formed and selected as cross-breeding lines. Although 657 combinations were crossed through monospore crossing, only 17 combinations were bred between the 'CBMLN-19' line and the 'CBMLN-30' line. Among them, 8 lines with fast mycelial growth and high density were selected. After inoculating the rice straw-fermented growth medium with 14 genetic resources and 8 cross-breeding lines, their incubation period was investigated. Six of the cross-breeding lines completed their incubation in 20 days, while 7 of the 14 genetic resources took more than 40 days to complete their incubation, reducing the incubation period by more than 20 days in most cross-breeding lines. After the incubations were completed, the clay loam soil was covered with for post-cultivation, and when the mycelial cultivation was complete, the formation of fruiting bodies was induced after scraping the mycelial bodies under these environmental conditions: 14℃, 95% relative humidity or higher, and 1,500 to 2,000 ppm CO2 concentration. The temperature was reduced to 6℃ at night, resulting in a low temperature shock. Thus, 4 lines of fruiting bodies occurred from two genetic resources 'CBMLN-31' and 'CBMLN-44' and two cross-bred lines 'CBMLN-96' and 'CBMLN-103'. After inoculation, the longest period for fruiting bodies to occur was 100 days for the control:, the genetic resource 'CBMLN-31', and the shortest period (45 days) was observed for the cross-breeding line 'CBMLN-103'. The result of the investigation of the fruiting body characteristics shows that the cross-bred line 'CBMLN-103' showed a small form with 1.9 g of individual weight and 123validstipes per box, which was the highest incidence among the four lines. Another cross-bred line, 'CBMLN-96', had an individual weight of 5.5 g, which is larger than that of 'CBMLN-103'; however, the number of valid stipes per box was 30 less than that of 'CBMLN-103'. Quantity analysis showed that the control, 'CBMLN-31', had the highest quantity of 783 g per box, followed by the cross-bred line, 'CBMLN-96' with 165 g per box, and then the 'CBMLN-103' with 232 g. The quantity of the two crossbred lines was lower than that of the control 'CBMLN-31'; however, the amount of fruiting bodies was higher, and the cultivation period was shortened by 32 to 33 days. Therefore, these two lines would be selected as superior lines.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.257-266
• /
• 2023

This study was conducted to investigate the growth characteristics of cucumber (Cucumis sativus L. 'Joeunbaekdadagi') and tomato (Solanum lycopersicum L. 'Dotaerang Dia') seedlings by light intensities and CO₂ concentrations in a closed-type plant production system (CPPS). Cucumber and tomato seeds were sown in 50-cell trays and germinated in CPPS at air temperature 25 ± 1℃ and relative humidity 50 ± 10% for 4 days. After germination, the CO₂ concentrations and light intensity treatment were treated at 500 (ambient), 1,000, and 1,500 µmol·mol^-1 and 100, 200, and 300 µmol·m^-2·s^-1 photosynthetic photon flux density (PPFD), respectively. The leaf area of cucumber showed the highest value in CO₂ 1,500 μmol·mol^-1. However, the leaf area of the tomato had no significant difference in CO₂ concentrations and light intensities treatments. In cucumber and tomato both seedlings, the growth and quality such as compactness and leaf area rate were increased with the increase of light intensity, and there were highest in 300 µmol·m^-2·s^-1. The root surface and number of root tips of cucumber and tomato seedlings were significantly increased with the increase in light intensity. In conclusion, the regulation of the CO₂ concentrations and light intensity can control the growth and quality of cucumber and tomato seedlings in CPPS, especially, increasing the light intensity can improve more significantly the growth and quality of seedlings.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.16-37
• /
• 2018

In this study, difference in chemical composition of $PM_{2.5}$ observed between the year 2013 and 2015 at six air quality intensive monitoring stations (Bangryenogdo (BR), Seoul (SL), Daejeon (DJ), Gwangju (GJ), Ulsan (US), and Jeju (JJ)) was investigated and the possible factors causing their difference were also discussed. $PM_{2.5}$, organic and elemental carbon (OC and EC), and water-soluble ionic species concentrations were observed on a hourly basis in the six stations. The difference in chemical composition by regions was examined based on emissions of gaseous criteria pollutants (CO, $SO_2$, and $NO_2$), meteorological parameters (wind speed, temperature, and relative humidity), and origins and transport pathways of air masses. For the years 2013 and 2014, annual average $PM_{2.5}$ was in the order of SL ($${\sim_=}DJ$$)>GJ>BR>US>JJ, but the highest concentration in 2015 was found at DJ, following by GJ ($${\sim_=}SJ$$)>BR>US>JJ. Similar patterns were found in $SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$. Lower $PM_{2.5}$ at SL than at DJ and GJ was resulted from low concentrations of secondary ionic species. Annual average concentrations of OC and EC by regions had no big difference among the years, but their patterns were distinct from the $PM_{2.5}$, $SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ concentrations by regions. 4-day air mass backward trajectory calculations indicated that in the event of daily average $PM_{2.5}$ exceeding the monthly average values, >70% of the air masses reaching the all stations were coming from northeastern Chinese polluted regions, indicating the long-range transportation (LTP) was an important contributor to $PM_{2.5}$ and its chemical composition at the stations. Lower concentrations of secondary ionic species and $PM_{2.5}$ at SL in 2015 than those at DJ and GJ sites were due to the decrease in impact by LTP from polluted Chinese regions, rather than the difference in local emissions of criteria gas pollutants ($SO_2$, $NO_2$, and $NH_3$) among the SL, DJ, and GJ sites. The difference in annual average $SO{_4}^{2-}$ by regions was resulted from combination of the difference in local $SO_2$ emissions and chemical conversion of $SO_2$ to $SO{_4}^{2-}$, and LTP from China. However, the $SO{_4}^{2-}$ at the sites were more influenced by LTP than the formation by chemical transformation of locally emitted $SO_2$. The $NO_3{^-}$ increase was closely associated with the increase in local emissions of nitrogen oxides at four urban sites except for the BR and JJ, as well as the LTP with a small contribution. Among the meterological parameters (wind speed, temperature, and relative humidity), the ambient temperature was most important factor to control the variation of $PM_{2.5}$ and its major chemical components concentrations. In other words, as the average temperature increases, the $PM_{2.5}$, OC, EC, and $NO_3{^-}$ concentrations showed a decreasing tendency, especially with a prominent feature in $NO_3{^-}$. Results from a case study that examined the $PM_{2.5}$ and its major chemical data observed between February 19 and March 2, 2014 at the all stations suggest that ambient $SO{_4}^{2-}$ and $NO_3{^-}$ concentrations are not necessarily proportional to the concentrations of their precursor emissions because the rates at which they form and their gas/particle partitioning may be controlled by factors (e.g., long range transportation) other than the concentration of the precursor gases.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.355-360
• /
• 2013

Diesel-burning air heater (air heater) and infrared heating lamp (infrared heater) were installed as auxiliary heaters in two single water-curtained plastic greenhouses with a set night temperature of $6^{\circ}C$ for cultivation of strawberry 'Seolhyang'. The average night air temperature was $6.6^{\circ}C$ in the infrared heater treatment and $7.1^{\circ}C$ in the air heater treatment. However, when the minimum outside temperature fell below $-10^{\circ}C$, the air heater had less internal temperature fluctuations. In contrast, the infrared heater had some cases of falling below the set temperature. The relative humidity was higher than 98% by the side-effect of water-curtain system regardless of the heating system. There was about $5^{\circ}C$ difference in leaf temperature between the turned-on and -off state of the infrared heater, and the efficacy of the infrared heater on leaf temperature was only limited to about 4 meters from the system. Peduncle length and plant height in the infrared heater tended to be greater than those in the air heater. There was, however, no statistically difference in leaf size and numbers of leaves, flowers on first cluster and branches. There was no difference in soluble solids content, fruit firmness, average fruit weight of the harvested fruits, and the yield. Comparing the heating costs, the air heater system took 622,662 won based on 543 L tax-free diesel, while the infrared heater system took 235,284 won by consuming 5,685 kWh of electricity, and 62.2% heating costs saving was achieved.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.392-399
• /
• 2013

This study aimed to investigate responses of photosynthesis, plant growth, and phytochemical contents to different artificial light sources for 'Seneca RZ' and 'Gaugin RZ' two butterhead lettuce (Lactuca sativa L.). In this study, fluorescent lamps (FL), three colors LEDs (red, blue and white, 5 : 4 : 1; RBW) and metalhalide lamps (MH) were used as artificial lighting sources. Photoperiod, air temperature, relative humidity, EC, and pH in a cultivation system were maintained at 16/8 h, $25/15^{\circ}C$, 60~70%, $1.4{\pm}0.2dS{\cdot}m^{-1}$, and $6.0{\pm}0.5$, respectively. The photosynthetic rate of both two butterhead lettuce were the highest under RBW in middle growth stage. However, in late growth stage, the photosynthetic rate of both two butterhead lettuce were higher under RBW and MH than FL. The light sources showed significant results for plant growth but those effects were different to variety. Fresh and dry weight of 'Gaugin RZ' butterhead lettuce under MH were heavier than other lights in all growth stages. Growth of 'Seneca RZ' butterhead lettuce was maximized highest under MH in middle growth stage and FL in late growth stage. In the leaf tissue of 'Seneca RZ' butterhead lettuce, tipburn symptom occurred under all light sources and in the leaf tissue of 'Gaugin RZ' butterhead lettuce, it occurred under two light sources except for fluorescent lamps in late growth stage. kinds of lamp affect plant growth more than plant quality. Relative growth rate of both two butterhead lettuce was faster in middle growth stage than late stage. Growth of 'Gaugin RZ' was shown by kinds of lamp in middle growth stage and but it was not significantly affected by light sources and variety in late stage. Most of the phytochemical contents of two butterhead lettuce were significantly affected by different light sources. Contents of all vitamins showed higher than other light sources on RBW for both two lettuce, especially ${\beta}$-Carotene content of 'Gaugin RZ' was the highest. Plant growth, photosynthesis, and phytochemical contents were observed significant effects by different light sources for two butterhead lettuce but those effects were highly different between variety and kinds of phytochemicals. Therefore, the selection of optimum light source should be considered by variety and kinds of phytochemicals in the plant factory.

• Journal of Bio-Environment Control
• /
• v.8 no.2
• /
• pp.75-82
• /
• 1999

This study was carried out to examine the effect of day/nignt temperatures during seedling culture on the vegetative and reproductive growth of Lycopersicum esculentum ‘Seokwang’. The study was consisted of two culture stages, plug seedling production in the growth chamber and hydroponic culture of the plant in a glasshouse. Experiments were replicated over time. The germinated seedlings were raised for 33 days (experiment 1) and 35 days (experiment 2) in 4 growth chambers, each with day/night temperatures of either $25^{\circ}C$/$25^{\circ}C$, 16$^{\circ}C$/16$^{\circ}C$, 16$^{\circ}C$/$25^{\circ}C$ or $25^{\circ}C$/16$^{\circ}C$. Cool-white fluorescent lamps provided 140$\mu$mol.m$^{-2}$ .s$^{-1}$ light for 12h each day. In the second experiment, all chambers were supplied with 1000$\mu$mol.mol$^{-1}$ CO$_{2}$ during the photoperiod and had an air velocity of 0.3m.s$^{-1}$ and relative humidity of 80%. Plug seedlings raised were transplanted to rockwool slabs in a glasshouse and were grown hydroponically using the same nutrient solutions used for seedling culture for 37 days (experiment 1) and 35 days (experiment 2). Plant height was affected more by mean daily temperature than by interaction of day and night temperatures. Plant height was the highest in 16/16$^{\circ}C$ treatment. Leaf count was not affected by day and night temperatures, and the chlorophyll concentration was the highest in 16/$25^{\circ}C$ treatment. Fresh and dry weights of stem tended to be greater in treatments of constant day and night temperature. The number of node on which first and second flower clusters were set was significantly higher in 25/$25^{\circ}C$ treatment than in the other treatments. Days to flower of the first flower on the first flower cluster were the greatest in 25/$25^{\circ}C$ and the least in 16/$25^{\circ}C$ treatment. Vegetative and reproductive growth, such as height, fresh and dry weights, days to flower, and nodes of the 1st and 2nd flower cluster set were affected by day/night temperatures.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2016

This study was conducted to determine the optimum nutrient solution, pH, irrigation interval, light intensity and planting density to growth of common ice plant (Mesembryanthemum crystallinum L.) in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-h photoperiod were used. Nutrient film technique systems with three layers were used for the plant growth system. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Treatments were comparison of the nutrient solution of Horticultural Experiment Station in Japan (NHES) and the nutrient solution of Jeju National University (NJNU), pH 6.0 and 7.0, irrigation interval 5 min and 10 min, light intensity 90 and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and within-row spacing 10 cm, 15 cm, 20 cm and 25 cm with between-row spacing 15 cm. Optimum macronutrients were composed N 7.65, P 0.65, K 4.0, Ca 1.6 and Mg $1.0mM{\cdot}L^{-1}$. There were no significant interactions between pH 6.0 and 7.0 about shoot fresh weight and shoot dry weight of common ice plant. Irrigation interval 5 min and 10 min was also the same result. Shoot fresh weight and shoot dry weight were highest at $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Shoot fresh weight and shoot dry weight were decreased according to increasing the planting density. From the above results, we concluded that optimum nutrient solution, optimum levels of pH, irrigation interval, light intensity and planting density were 6.0-7.0 and 10 min, $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and $15{\times}15cm$, respectively for growth of common ice plant in a closed-type plant production system.