• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.5
• /
• pp.299-310
• /
• 2012

Purpose: The purpose of this study was to evaluate the histological healing process of 3 different types of xenogenic tooth bone graft material and xenogenic bone graft material. Methods: Three types of human tooth bone graft material (chips, crowns, and roots) and BioOss (Geistlich Pharma AG, Wolhausen, Switzerland) was filled at the preformed 4 round-shaped calvarial bone defects of beagle dogs. The beagles were sacrificed at 2, 4, 8, and 12 weeks, respectively, for radiological and histological evaluation. Results: Increased strength and radiopacity were detected in all graft material groups in time-dependent manner. New bone was formed and matured surrounding the graft material histologically. Also, a new bone was directly integrated with graft material. Conclusion: It was expected that newly developed tooth bone graft material would show good bone healing capacity if it was used as a graft material for the restoration of bony defect.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.191-200
• /
• 2009

Dental Pulp Stem Cells are superior to other types of adult stem cell. Because of teeth are easy to access and are extracted throughout life. A supernumerary tooth is an important clinical problem found in various populations of the world. The incidence of supernumerary teeth varies depending on the literature source. Pediatric dentists are routinely extracted them. However, no studies have been reported regarding Dental Pulp stem cells in a supernumerary tooth, and we failed to note that a valuable source of human stem cell. Herein, we tried to show that a supernumerary tooth contains cells that display the characteristic features of stem cells.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.337-346
• /
• 2008

Objective: The purpose of this study was to determine whether an exogenous electric current to the alveolar bone surrounding a tooth being orthodontically treated can enhance tooth movement in human and to verify the effect of electric currents on tooth movement in a clinical aspect. Methods: This study was performed on 7 female orthodontic patients. The electric appliance was set in the maxilla to provide a direct electric current of $20{\mu}A$. The maxillary canine on one side was assigned as the experimental side, and the other as control. The experimental canine was provided with orthodontic force and electric current. The control side was given orthodontic force only. Electrical current was applied to experimental canines for 5 hours a day. The amount of canine movement was measured with an electronic caliper every week. Results: The amount of orthodontic tooth movement in the experimental side during 4 weeks was greater by 30% compared to that of the control side. The amount of increase in tooth movement in the experimental side was statistically significant. The amount of tooth movement in the experimental side during the first two weeks was !Bleater than that in the following two weeks. The amount of weekly tooth movement in the control side was decreased gradually. Conclusions: These results suggested that the exogenous electric current from the miniature electric device might accelerate orthodontic tooth movement by one third and have the potential to reduce orthodontic treatment duration.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.16-23
• /
• 2002

Physical properties of composite resins such as strength, resistance to wear, discoloration, etc depend on the degree of conversion of the resin components. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the thickness of tooth structure penetrated by light and applied light curing time. The coronal portions of extracted human teeth (one anterior tooth, three posterior tooth) was embedded by pink denture material. the mounted teeth were cut into three illumination sections (1mm thickness enamel section, 1mm thickness dentin section, 2mm thicknes dentin section) and one backing section with cutting wheel. Thin resin films were made by using 6kg pressure between slide glass during 5 minutes Thin resin film was light cured on coupled illumination section during 40sec, 80sec and 120sec. each illumination section was coupled as follows; no tooth structure(X), ename section(E), enamel section + 1mm dentin section(ED1), enamel section + 2mm dentin section(ED2), enamel section + 1mm dentin section + 2mm dentin section(EDD). To simulate the clinical situation more closely, thin resin films was cured against a backing section of tooth structure. The degree of conversion of carbon double bonds to single bonds in the resin films were examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows ; 1 As curing time was increased, conversion rate was increased and as tooth thickness which was penetrated by curing light was increased, conversion rate was decreased. 2. At all tooth thickness groups, conversion rate between 80sec and 120sec was not significantly increased(P＞0.05). 3. At 40sec group and 80sec, conversion rate between no tooth structure(X) group and 1mm enamel section(E) group was not significantly decreased(P＞0.05). 4. At 80sec group and 120sec, conversion rate between 1mm enamel section(E) group and 1mm enamel section + 1mm dentin section(ED1) group was not significantly decreased(P＞0.05).

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.85-92
• /
• 2017

PURPOSE. The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND METHODS. Shear bond strengths of different cements with various tooth surface treatments (none, etching, priming, or etching and priming) on enamel and dentin of human teeth were measured using the Swiss shear test design. Three adhesives (Permaflo DC, Panavia F 2.0, and Panavia V5) and one self-adhesive cement (Panavia SA plus) were included in this study. The interface of the cement and the tooth surface with the different pre-treatments was analyzed using SEM. pH values of the cements and primers were measured. RESULTS. The highest bond strength values for all cements were achieved with etching and primer on enamel ($25.6{\pm}5.3-32.3{\pm}10.4MPa$). On dentin, etching and priming produced the highest bond strength values for all cements ($8.6{\pm}2.9-11.7{\pm}3.5MPa$) except for Panavia V5, which achieved significantly higher bond strengths when pre-treated with primer only ($15.3{\pm}4.1MPa$). Shear bond strength values were correlated with the micro-retentive surface topography of enamel and the tag length on dentin except for Panavia V5, which revealed the highest bond strength with primer application only without etching, resulting in short but sturdy tags. CONCLUSION. The highest bond strength can be achieved for Panavia F 2.0, Permaflo DC, and Panavia SA plus when the tooth substrate is previously etched and the respective primer is applied. The new cement Panavia V5 displayed low technique-sensitivity and attained significantly higher adhesion of all tested cements to dentin when only primer was applied.

• International Journal of Oral Biology
• /
• v.41 no.4
• /
• pp.243-251
• /
• 2016

This study was undertaken to achieve a high bleaching efficacy with plasma, through longer application and reparative bleaching processes, by different shade evaluation methods. Extracted human teeth were divided into 6 groups (n=10). All teeth were treated in pairs. Low concentration of 15% carbamide peroxide (CP) was applied, with and without plasma, for 10, 20, and 30-min tooth bleaching, respectively. The bleaching procedure was repeated once daily for four days. The teeth were maintained in a moist environment provided by artificial saliva. The Vitapan Classical shade guide and Commission Internationale de L'Eclairage (CIELAB) color system were collectively used to measure the bleaching efficacy. Color evaluation was statistically analyzed using Student t-test and one-way analysis of variance (ANOVA) complemented by Tukey's test. Combining the plasma with 15% CP showed significantly greater color changes compared to bleaching without plasma (p<0.05). A high bleaching efficacy with plasma is proportional to the repetitive application and the treatment time. A 30-min application with plasma provided the best bleaching. Repetitive bleaching showed lower probability of color relapse of the bleached tooth. The color change by shade guide correlated with the changes in CIELAB color system. A value of 1 color change units (CCU) conversion factor for overall color change (${\Delta}E$) values comparisons was 3.724 values. The two measuring methods provide a more accurate correspondence of color change. The repetitive and longer application for tooth bleaching, combined with plasma, has a strong bleaching effect and produces whiter teeth.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.3
• /
• pp.127-133
• /
• 2012

PURPOSE. Many dentists use desensitizing agents to prevent hypersensitivity. This study compared and evaluated the effect of two desensitizing agents on the retention of cast crowns when cemented with various luting agents. MATERIALS AND METHODS. Ninety freshly extracted human molars were prepared with flat occlusal surface, 6 degree taper and approximately 4 mm axial length. The prepared specimens were divided into 3 groups and each group is further divided into 3 subgroups. Desensitizing agents used were GC Tooth Mousse and $GLUMA^{(R)}$ desensitizer. Cementing agents used were zinc phosphate, glass ionomer and resin modified glass ionomer cement. Individual crowns with loop were made from base metal alloy. Desensitizing agents were applied before cementation of crowns except for control group. Under tensional force the crowns were removed using an automated universal testing machine. Statistical analysis included one-way ANOVA followed by Turkey-Kramer post hoc test at a preset alpha of 0.05. RESULTS. Resin modified glass ionomer cement exhibited the highest retentive strength and all dentin treatments resulted in significantly different retentive values (In Kg.): GLUMA ($49.02{\pm}3.32$) > Control ($48.61{\pm}3.54$) > Tooth mousse ($48.34{\pm}2.94$). Retentive strength for glass ionomer cement were GLUMA ($41.14{\pm}2.42$) > Tooth mousse ($40.32{\pm}3.89$) > Control ($39.09{\pm}2.80$). For zinc phosphate cement the retentive strength were lowest GLUMA ($27.92{\pm}3.20$) > Control ($27.69{\pm}3.39$) > Tooth mousse ($25.27{\pm}4.60$). CONCLUSION. The use of $GLUMA^{(R)}$ desensitizer has no effect on crown retention. GC Tooth Mousse does not affect the retentive ability of glass ionomer and resin modified glass ionomer cement, but it decreases the retentive ability of zinc phosphate cement.

• The korean journal of orthodontics
• /
• v.44 no.2
• /
• pp.96-102
• /
• 2014

Objective: A recent study suggested that rs6504340, a polymorphism within the homeobox B (HOXB) gene cluster, is associated with the susceptibility for malocclusions in Europeans. The resulting malocclusions require orthodontic treatment. The aim of this study was to investigate the association of rs6504340 and other dentition-implicated polymorphisms with dental and occlusal traits in Korean and Japanese populations. Methods: The study participants included 223 unrelated Koreans from the Busan area and 256 unrelated Japanese individuals from the Tokyo metropolitan area. DNA samples were extracted from saliva specimens. Genotyping for rs6504340 and four single nucleotide polymorphisms (SNPs) that have been shown to be associated with the timing of first tooth eruption and the number of teeth at 1 year of age (rs10506525, rs1956529, rs9674544, and rs8079702) was performed using TaqMan assays. The Index of Orthodontic Treatment Need (IOTN), overjet, overbite, arch length discrepancy, crown sizes, and length and width of the dental arches were measured. Spearman's correlation coefficients were calculated to evaluate relationships between rs6504340 and these dental/occlusal traits. Results: We evaluated the aesthetic components and dental health components of the IOTN in the Korean and Japanese populations and found that neither rs6504340 nor the other four SNPs showed any association with dental and occlusal traits in these East Asian populations. Conclusions: These negative results suggest that further research is needed to identify the genetic determinants of malocclusions in order to reach a consensus.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.98.1-98.1
• /
• 2007

• Journal of Periodontal and Implant Science
• /
• v.14 no.1
• /
• pp.77.2-77.2
• /
• 1984