제조-공급자간 갈등 원인과 거래조정 방식의 갈등관리 효과 (The Causes of Conflict and the Effect of Control Mechanisms on Conflict Resolution between Manufacturer and Supplier)
-
- 한국유통학회지:유통연구
- /
- 제17권4호
- /
- pp.55-80
- /
- 2012
다른 기업과 거래관계를 형성하고 유지하는 것은 빠르게 변화하는 치열한 환경에서 대부분의 기업에게 불가피한 전략적 선택이다. 유통망 안의 모든 기업들도 결국 독립적 기업 간의 이러한 거래 계약으로 맺어져 있다. 하지만 모든 기업 간의 거래가 하나의 목표를 가지고 공동의 이익 창출을 위해 노력하여, 모두 효과적이고 효율적인 성과만을 낼 수는 없다. 대리인 이론에 따르면, 기업들은 모두 독립적 주체로서 각자의 이해를 추구하고, 위험을 회피하려하며, 제한된 합리성을 가지고 불충분한 정보를 처리하게 된다. 즉, 기업 간 거래관계는 그 속에서 신뢰와 협력을 기대하는 동시에, 갈등과 기회주의적 행위도 예측해야 한다. 이에 본 연구는 기업 간 거래의 갈등 원인을 확인하고, 실제 기업이 주로 활용하는 거래조정 방식의 갈등관리 효과를 밝히고자 한다. 이를 위해 관련된 기존 연구와 대리인 이론을 활용하여, 제조업자와 공급업자 간 갈등이 관계성과에 미치는 영향과 거래 위험요인(환경동태성, 자산특유화 수준)의 갈등 유발 효과, 그리고 국내 기업거래 연구에서 잘 다루어지지 않은 거래 조정방식의 갈등관리 효과를 가정하였다. 더불어 국내 중소기업 데이터 329개를 대상으로 연구모델을 검증하였다. 연구 결과, 구매기업(제조업자)의 환경 동태성과 자산 특유화 수준이 높을수록 더 큰 갈등이 유발되었으며, 이러한 B2B 갈등은 기업 간 관계질과 재무성과에 부정적 영향을 끼쳤다. 또한 사회적 조정방식과 법적 조정방식은 갈등의 관계질에 대한 부정적 영향을 매우 유의한 수준에서 완화시키는 조절효과가 검증되었다. 이러한 결과를 바탕으로 본 연구는 B2B갈등의 원인과 관리기법에 대하여 실증적으로 확인하였다는 의의가 있으며, 특히 국내 거래관리 연구에서 소홀히 다루어졌던 법적 계약 방식의 긍정적이고 유의한 효과를 확인하였다는 의의가 있다.
통풍과 차양이 하절기 옥외공간에서 인간이 느끼는 온열쾌적성에 어떤 영향을 미치는지를 객관적으로 검증하기 위하여 통풍과 차양을 달리한 실험구를 조성하고 흑구온도와 기온 및 풍속을 측정하여 평균복사온도를 환산하여 비교 분석하였다. 미기후 측정을 위하여 개방된 잔디밭에 철제 각관을 이용하여 가로
The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.
목적 : 환자를 통과한 투과선량으로부터 알고리즘을 이용하여 종양선량을 계산하는 새로운 개념의 온라인 선량측정시 인체 조직내의 폐 등 불균질조직의 존재는 인체내 종양선량 및 투과선량에 영향을 미친다. 인체내에 불균질조직이 존재하는 경우 측정된 투과선량으로부터 종양선량 환산시 밀도를 이용한 보정의 정확도를 확인하기 위하여 실험을 시행하였다. 방법: 폐조직의 밀도와 유사한 재질인 코르크 (밀도
본 연구의 목적은 국내 외식 프랜차이즈 시스템에서 가맹점에 대한 가맹본부의 관계품질에 영향을 미치는 변수를 사후 지원서비스로 설정하고, 사후 지원서비스가 가맹점의 관계품질(신뢰, 만족, 몰입)과 경영성과(재무적 성과, 비재무적 성과)에 미치는 영향에 대한 포괄적인 모형을 개발하는 것이다. 제안된 모형을 검증하기 위하여 서울 및 경기 지역의 외식 프랜차이즈 가맹점 경영자 500명을 대상으로 설문 조사를 하여, 구조방정식을 통해 실증 분석하였다. 분석결과는 다음과 같다. 첫째, 사후 지원서비스 요인 중 제품범주 및 가격 요인과 정보제공 및 문제해결 능력 요인은 가맹점의 만족과 몰입에만 영향을 미치는 것으로 나타났다. 둘째, 물류지원과 슈퍼바이저 지원 요인은 신뢰와 만족에만 영향을 미치는 것으로 나타났다. 셋째, 재교육 및 훈련지원 요인은 가맹점의 신뢰와 몰입에만 영향을 미치는 것으로 나타났다. 넷째, 판매촉진 요인은 신뢰 만족, 그리고 몰입 모두에 영향을 미치는 것으로 나타났다. 다섯째, 관계품질요인들 간의 관계는 신뢰가 만족에 긍정적인 영향을 미치지만 몰입에는 직접적으로 영향을 미치지 못하고, 만족을 통해서 몰입에 긍정적인 영향을 미치는 것으로 나타났다. 여섯째, 신뢰는 재무적 성과에만 긍정적인 영향을 미치고, 만족과 몰입은 재무적 성과와 비재무적 성과 모두에 긍정적 영향을 미치는 것으로 나타났다. 마지막으로 본 연구의 결과요약과 시사점, 그리고 연구의 한계점과 향후 연구방향이 제시되었다.
본 연구는 디자인 영역 중 웹 스타일에 대해서 소비자 감성과 만족과의 관계를 연구했다. 기존 웹 스타일 연구들은 웹의 레이아웃과 구조도 등과 색상 등이 감성에 미치는 영향에서 연구했다. 본 연구는 기존 연구들과 차별되게 웹의 구성 요소를 배제하고 소비자의 감성 지표만을 갖고 소비자 만족과의 관계를 분석했다. 분석을 위해 검증을 위해 소비자 204명을 대상으로 40개 웹 스타일 테마를 선정, 각 소비자에게 4개씩 평가하도록 하였다. 소비자에게 평가하도록 한 감성 형용사는 18개의 대비되는 쌍을 갖는 감성 형용사로 구성하였고, 요인 분석을 통해 상위 감성 지표를 추출했다. 각 감성 지표들은 '부드러움', '모던함', '명확함', '꽉 참' 이었으며, 감성지표들이 소비자 만족에 미치는 영향이 다를 것으로 판단하여 가설을 수립했다. 분석 결과에 따라 가설 1과 2, 3은 채택되었으며, 가설 4의 경우는 기각되었다. 가설 4의 경우 기각되었지만 정의 방향이 아닌 부의 방향으로 유의한 것으로 나타났다. 이때, 조절 초점 성향이 감성이라는 정보처리 과정에서 소비자 만족에 미치는 영향이 다를 것으로 판단했다. 조절 초점 성향은 조직 행동 및 의사결정에 영향을 주기도 하며, 정치, 문화, 윤리적 판단 및 행동은 물론 광범위적 심리적 문제와 사고 프로세스, 감정적 반응에도 영향을 미친다. 때문에 각 감성 지표에 대한 조절 초점 간 차이를 확인할 필요성이 있고, 각 감성 지표에 대한 세부 가설을 수립했다. 세부 가설을 검증하기 위해 조절 회귀 분석을 수행했다. 분석 결과 가설 5는 부분적으로 지지됐고, 가설 5.3만 지지되었고, 5.4의 경우 기각되었지만 가설과의 반대 방향으로 지지되었다. '명확함'의 경우 향상 초점이 소비자 만족에 더 큰 영향을 보였고, 예방 초점일수록 '꽉 참'을 더 선호한 것으로 나타났다. 분석 결과를 바탕으로 조절 초점 성향을 향상, 예방, 중간 성향으로 3집단으로 구분, 소비자 감성 기반으로 웹 스타일에 대한 추천을 할 수 있는 알고리즘을 개발했다.
목 적: 본 연구는 난소전위술을 시행한 가임기 여성의 자궁경부암 방사선치료 시 HalcyonTM Fast kV CBCT를 사용하였을 때 난소에 미치는 흡수선량과 영상의 품질을 분석하여 유용성을 평가하고자 한다. 대상 및 방법: 인체모형 팬텀(Alderson Rando Phantom, USA)의 전산화단층촬영 영상에 측정에 필요한 자궁경부와 난소의 윤곽묘사(contouring)를 하였고, 해당 장기 단면에 광자극발광선량계(Optically Stimulated Luminescence Dosimeter, OSLD, InLight system, Landauer, USA)를 각각 3개씩 부착하였다. TruebeamTM의 Pelvis mode(이하 TP)와 HalcyonTM의 Pelvis mode(이하 HP) 그리고 HalcyonTM의 Pelvis Fast mode(이하 HPF)에서 자궁경부와 난소에 들어가는 흡수선량을 측정하기 위해 촬영 범위를 17.5 cm와 12.5 cm로 촬영 범위를 축소한 영상을 촬영하였다. 총 10회의 누적선량을 합산하였고, 자궁경부암 치료 횟수인 23회의 값으로 치환하여 비교하였다. 또한 영상 장비 간의 CBCT 영상 품질을 비교하기 위해 Catphan 504 팬텀(The Phantom Laboratory, USA)을 이용하여 균일도(Uniformity), 저 대조도 가시(Low contrast visibility, LCV), 공간분해능(Spatial resolution), 기하학적 왜곡(Geometric Distortion)을 비교 분석하였다. 각각 3회 반복 측정하여 Doselab (Versions: 6.8, Mobius Medical Systems) 프로그램으로 분석 후 평균값을 구하였다. 결 과: CBCT에 의한 흡수선량을 OSLD로 측정한 결과 동일한 조건일 시 TP와 HP는 유의미한 결과를 얻지 못하였다. 가장 큰 감소 값을 보인 모드는 TP 대비 HPF였다. HPF는 17.5 cm의 촬영 범위에서 흡수선량이 TP보다 자궁경부가 약 39.82%, 난소에서 약 19.8% 감소 하였고, 12.5 cm 으로 촬영 범위를 축소할 경우 자궁경부는 34.2%, 난소 50.5%로 감소 시킬 수 있었다. 또한 위 실험에서 사용된 영상의 품질을 평가한 결과 Geometric Distortion 1mm 이내(SBRT 기준), Uniformity HU, LCV 2.0% 이내 Spatial Resolution 3 lp/mm 이상으로 장비사의 기준치를 준수하였다. 결 론: 본 실혐 결과에 따라 난소전위술을 시행한 가임기 여성의 방사선치료 시 CBCT로 인한 피폭선량을 낮추기 위해서는 TruebeamTM 보다 다양한 조건을 선택 할 수 있는 HalcyonTM이 유용할 것으로 평가 되며, 특히 낮은 mAs로도 영상의 품질을 유지하는 HalcyonTM의 Fast kV CBCT를 권장한다. 다만 다른 치료 장비에서도 난소전위를 시행한 환자는 촬영 범위를 조정하는 것으로 저선량에 대한 추가적인 피폭 감소시킬 수 있을 것으로 사료된다.
본 연구는 최근 전쟁과 기후변화, 지정학적 불안이 고조되는 가운데 기술혁신의 가속화 등으로 글로벌 경영환경의 급변하고 있다. 이에 따라 산업생태계의 변동성, 복잡성, 모호성, 불확실성이 지속적 확장으로 미래에 대한 예측이나 계획이 어려워지고 있다. 이에 따라 조직은 생존전략에 의해 한계사업정리, 해고 등 불가피한 구조조정을 진행하고 있다. 이에 따라 직장인들은 의도치 않게 직장을 잃을 수 있다는 불안요인이 높아지는 가운데 지속적 경제활동을 위한 대안으로 창업을 모색하고 있다. 창업으로 전환하는 과정에서 직장인의 자기결정성이 어떠한 경로를 통해 영향을 미치는지 검증하고자 하였다. 본 연구를 위해 온라인 설문조사로 310명의 유효 data를 기반으로 SPSS와 AMOS 통계패키지를 활용하였다. 결과를 요약하면, 첫째, 직장인의 자기결정성은 창업의지에 유의한 영향을 미치지 못했다. 다만 자기결성성이 혁신성과 창업지원정책인식에 정(+)의 영향관계를 확인하였다. 이 결과는 창업에 바로 도전하기보다는 장기적인 인생경로 관점에서 혁신적인 경험을 축적하고 창업지원정책인식도를 높여서 단계적으로 준비하려는 심리가 작동된 것을 판단된다. 둘째, 혁신성이 창업의지에 정(+)의 영향을 확인하였다. 또한 창업지원정책인식이 창업의지에 정(+)의 영향을 확인하였다. 이는 정부의 다양한 창업지원정책인식은 창업을 고려할 때 체감도가 높다는 인식이 반영된 것으로 판단된다. 셋째, 혁신성이 창업지원정책인식에 정(+)의 영향을 확인하였다. 이는 예비창업자들이 혁신성을 발현하여 새로운 아이디어의 실현을 위해서는 창업지원정책인식의 실효성이 반영된 것으로 판단된다. 넷째, 혁신성과 창업지원정책인식은 자기결성정과 창업의지 간의 관계를 매개하였고, 창업지원정책인식은 혁신성과 창업의지 간의 관계를 매개하는 것을 확인하여 창업의지에 중요한 요소임을 확인하였다. 창업관련 선행연구에서 학생들을 대상으로 주류를 이루고 있지만, 경제활동의 비중이 높은 직장인을 대상으로 한 연구대상의 차별성과 연구범위 확대 측면에서 학문적 가치가 있고, 자기결정정성의 동기만으로는 창업의지를 자극되지 않는다는 점과 혁신성과 창업지원정책의 완전매개효과 측면을 고려할 때 정부의 인적, 물적 지원정책 등의 실무적 측면에서 시사하는 바가 크다. 본 연구에서 표본의 선정 및 분석과정에서 동일방법편의 문제가 완전히 해소되지 않은 한계성과 창업의지가 형성되어 창업행동으로 전환되는지에 대한 추가적인 확정연구의 필요성이 있다. 선행연구에서 다소 부족했던 인간심리 동기와 창업 간의 관련성을 다룬 학문적 및 실무적 측면에서 직장인의 창업 전환은 개인의 경제적 안정과 국가적으로 일자리 창출의 기대효과가 예상되며 지속적인 연구의 필요성과 가치성이 있다고 판단된다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70