• Molecular & Cellular Toxicology
• /
• v.4 no.4
• /
• pp.323-330
• /
• 2008

Surrogate tissue analysis incorporating -omics technologies has emerged as a potential alternative method for evaluating toxic effect of the tissues which are not accessible for sampling. Among the recent applications, blood including whole blood, peripheral blood lymphocytes and peripheral blood mononuclear cells (PBMCs) was suggested as a suitable surrogate tissue in determining toxicant exposure and effect at the pre- or early clinical stage. In this application, we investigated transcriptomic profiles in astemizole treated Cynomolgus monkey's PBMCs. PBMCs were isolated from 4-6 years old male monkeys at 24 hr after administration45 Helvetica Light (10 mg/kg, 30 mg/kg). Gene expression profiles of astemizole treated monkey's PBMCs were determined using Affymetrix $GeneChip^{(R)}$ Human Genome U133 plus 2.0 arrays. The expression levels of 724 probe sets were significantly altered in PBMCs at 10 or 30 mg/kg after astemizole administration following determination of paired t-test using statistical criteria of ${\geq}$$1.5-fold changes at P<0.05. Gene expression patterns in PBMCs showed a considerable difference between astemizole 10 and 30 mg/kg administration groups in spite of an administration of the same chemical. However, close examination using Ingenuity Pathway Analysis (IPA) software revealed that several gene sets related to cardiotoxicity were deregulated at astemizole 10 and 30 mg/kg administration groups. The deregulation of cardiac hypertrophy related genes such as TXN, GNAQ, and MAP3K5 was observed at 10 mg/kg group. In astemizole 30 mg/kg group, genes involved in cardiotoxicity including cardiac necrosis/cell death, dilation, fibrosis, and hypertrophy were also identified. These results suggest that toxicogenomic approach using PBMCs as surrogate tissues will contribute to assess toxicant exposures and identify biomarkers at the pre-clinical stage.

• Journal of Environmental Impact Assessment
• /
• v.19 no.3
• /
• pp.271-279
• /
• 2010

We conducted a quantitative human health risk assessment with respect to inhalation of heavy metals for residents of housing developments in "new towns" where an incinerator will be operated within the area scheduled for construction thereof. To assess potential human health risk we calculated the amount of heavy metals emitted from the incinerator, and then forecasted the potential health impact on adjoining areas where new housing is to be developed (i.e. "new towns") at different altitudes by a using SCREEN-3 model. We assessed Cancer Risk (CR) caused by known carcinogens using the Inhalation Unit Risk criteria developed by the US Environmental Protection Agency. Notably, we assessed risk by determining concentrations of heavy metals on a floor by floor basis, as apartment buildings are to be constructed near the incinerator according to a pre-devised plan. Results indicated that cancer risk for most carcinogens exceeded US EPA standards for the highest locations at each collection point. This result indicates that construction of high buildings in areas adjoining incinerators is undesirable, and that measures to lower carcinogens are needed. The results of this study, which assessed health risk from exposure to heavy metals emitted from a nearby incinerator, can be useful in land use planning with respect to the location of housing developments in new towns, as well as the heights of any buildings constructed. Furthermore, the methodology deployed herein with respect to risk assessment can be helpful for policy makers and the general public in the event of conflicts regarding incinerator projects in the future. The results herein may also be of merit in determining priorities when establishing harm reduction measures for carcinogens at incinerators. However, the study does contain several limitations. The SCREEN-3 model, a kind of screening model that provides conservative results, can provide higher forecasted concentrations of air pollutants than other models. Moreover, although the incinerator in question is set to be a thermoselect type, domestic data for emissions from these incinerators is not available, and assumptions were based on a stoker type incinerator. Insufficient domestic data likewise compelled the use of data of USA, resulting in possible errors in results. Continued research will thus be required to develop systematic methodologies that address the foregoing factors and produce more reliable outcomes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.131-136
• /
• 2006

During lactic acid bacteria (LAB) transit through the gastrointestinal tract, ingested microorganisms were exposed to successive stress factors, including low pH in the human stomach and in bile acid. These stress factors can be used as criteria for the selection of a viable probiotic strain. Four such strains (Lactobacillus helveticus SGU 0011, Lactobacillus pentosus SGU 0010, Streptococcus thermophilus SGU 0021 and Lactobacillus casei SGU 0020) were isolated from raw milk. When the identified LAB were exposed to synthetic gastric juice, whereas L. casei SGU 0020 and S. thermophilus SGU 0021 exhibited a 0% survival rate, L. helveticus SGU 0011 and L. pentosus SGU 0010 exhibited 60% and 95% survival rates. L. casei SGU 0020 and S. thermophilus SGU 0021 could not be examined with regard to their tolerances to artificial bile juice, as they uniformly died upon exposure. However, L. helveticus SGU 0011 and L. pentosus SGU 0010 individually survived at rates of 39% and 93%. Also, all four of these strains were confirmed to be tolerant of ten different antibiotics.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.13-24
• /
• 2012

To prevent the damage to human health by climate change, vulnerability assessment should be conducted for establishment of adaptation strategies. In this study, vulnerability assessment was conducted to provide information about vulnerable area for making adaptation policy. vulnerability assessment for human health was divided into three categories; extreme heat, ozone, and epidemic disease. To assess vulnerability, suitable indicators were selected by three criteria; sensitivity, adaptive capacity, and exposure, spatial data of indicators were prepared and processed using GIS technique. As a result, high vulnerability to extreme heat was shown in the low land regions of southern part. And vulnerability to harmful ozone was high in the surrounding area of Dae-gu basin and metropolitan area with a number of automobiles. Vulnerability of malaria and tsutsugamushi disease have a region-specific property. They were high in the vicinity of the Dimilitarized zone and south-western plain, respectively. In general, vulnerability of human health was increased in the future time. Vulnerable area was extended from south to central regions and from plain to low mountainous regions. For assessing vulnerability with high accuracy, it is necessary to prepare more related indicators and consider weight of indicators and use climate prediction data based on the newly released scenario when assessing vulnerability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.2
• /
• pp.179-186
• /
• 2014

Metabolomics is the study of changes in the metabolic status of an organism as a consequence of drug treatment, environmental influences, nutrition, lifestyle, genetic variations, toxic exposure, disease, stress, etc, through global or comprehensive identification and quantification of every single metabolite in a biological system. Since most chronic diseases have been demonstrated to be linked to nutrition, nutritional metabolomics has great potential for improving our understanding of the relationship between disease and nutritional status, nutrient, or diet intake by exploring the metabolic effects of a specific food challenge in a more global manner, and improving individual health. In particular, metabolite profiling of biofluids, such as blood, urine, or feces, together with multivariate statistical analysis provides an effective strategy for monitoring human metabolic responses to dietary interventions and lifestyle habits. Therefore, studies of nutritional metabolomics have recently been performed to investigate nutrition-related metabolic pathways and biomarkers, along with their interactions with several diseases, based on animal-, individual-, and population-based criteria with the goal of achieving personalized health care in the future. This article introduces analytical technologies and their application to determination of nutritional phenotypes and nutrition-related diseases in nutritional metabolomics.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.1
• /
• pp.9-17
• /
• 2022

As the COVID-19 pandemic situation worsens, the time spent indoors increases, and the exposure to indoor environmental pollution such as indoor air pollution and noise also increases, causing problems such as deterioration of human health, stress, and discord between neighbors. This paper designs and implements a system that measures and monitors indoor air quality and noise, which are representative evaluation criteria of the indoor environment. The system proposed in this paper consists of a particulate matter measurement subsystem that measures and corrects the concentration of particulate matters to monitor indoor air quality, and a noise measurement subsystem that detects changes in sound and converts it to a sound pressure level. The concentration of indoor particulate matters is measured using a laser-based light scattering method, and an error caused by temperature and humidity is compensated in this paper. For indoor noise measurement, the voltage measured through a microphone is basically measured, Fourier transform is performed to classify it by frequency, and then A-weighting is performed to correct loudness equality. Then, the RMS value is obtained, high-frequency noise is removed by performing time-weighting, and then SPL is obtained. Finally, the equivalent noise level for 1 minute and 5 minutes are calculated to show the indoor noise level. In order to classify noise into direct impact sound and air transmission noise, a piezo vibration sensors is mounted to determine the presence or absence of direct impact transmitted through the wall. For performance evaluation, the error of particulate matter measurement is analyzed through TSI's AM510 instrument. and compare the noise error with CEM's noise measurement system.

• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.26.1-26.15
• /
• 2021

Objectives: The aim of the present systematic review was to investigate the cryopreservation process of dental pulp mesenchymal stromal cells and whether cryopreservation is effective in promoting cell viability and recovery. Materials and Methods: This systematic review was developed in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and the research question was determined using the population, exposure, comparison, and outcomes strategy. Electronic searches were conducted in the PubMed, Cochrane Library, Science Direct, LILACS, and SciELO databases and in the gray literature (dissertations and thesis databases and Google Scholar) for relevant articles published up to March 2019. Clinical trial studies performed with dental pulp of human permanent or primary teeth, containing concrete information regarding the cryopreservation stages, and with cryopreservation performed for a period of at least 1 week were included in this study. Results: The search strategy resulted in the retrieval of 185 publications. After the application of the eligibility criteria, 21 articles were selected for a qualitative analysis. Conclusions: The cryopreservation process must be carried out in 6 stages: tooth disinfection, pulp extraction, cell isolation, cell proliferation, cryopreservation, and thawing. In addition, it can be inferred that the use of dimethyl sulfoxide, programmable freezing, and storage in liquid nitrogen are associated with a high rate of cell viability after thawing and a high rate of cell proliferation in both primary and permanent teeth.

• Toxicological Research
• /
• v.28 no.2
• /
• pp.73-79
• /
• 2012

While the ability to develop nanomaterials and incorporate them into products is advancing rapidly worldwide, understanding of the potential health safety effects of nanomaterials has proceeded at a much slower pace. Since 2008, Korea Food and Drug Administration (KFDA) started an investigation to prepare "Strategic Action Plan" to evaluate safety and nano risk management associated with foods, drugs, medical devices and cosmetics using nano-scale materials. Although there are some studies related to potential risk of nanomaterials, physical-chemical characterization of nanomaterials is not clear yet and these do not offer enough information due to their limitations. Their uncertainties make it impossible to determine whether nanomaterials are actually hazardous to human. According to the above mention, we have some problems to conduct the human exposure risk assessment currently. On the other hand, uncertainty about safety may lead to polarized public debate and to businesses unwillingness for further nanotechnology investigation. Therefore, the criteria and methods to assess possible adverse effects of nanomaterials have been vigorously taken into consideration by many international organizations: the World Health Organization, the Organization for Economic and Commercial Development and the European Commission. The object of this study was to develop risk assessment principles for safety management of future nanoproducts and also to identify areas of research to strengthen risk assessment for nanomaterials. The research roadmaps which were proposed in this study will be helpful to fill up the current gaps in knowledge relevant nano risk assessment.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.12-18
• /
• 2023

The effective evacuation strategy according to the accident scenario is crucial to minimize human casualties in the event of toxic gas leak accidents. In this study, the effect of the direction of a building and the location of an industrial complex on the increase in indoor concentration and outdoor diffusion was examined under the same leakage conditions, and effective evacuation criteria were established. In addition, the guidelines for building directions were suggested when constructing buildings that would mitigate human damage caused by chemical accidents. Three scenarios where buildings faced the front, side, and rear of the leakage direction were investigated through CFD simulations. The results revealed that when the building faced the industrial complex, both indoor and outdoor average gas concentrations increased significantly, reaching up to 120 times higher than the other two orientations. Moreover, the indoor space was filled with toxic gas substances more than twice in the same time due to the rapid increase of indoor concentration rate. In cases where the building's windows were positioned at the front, toxic gas stagnation occurred around the building due to pressure differences and reduced flow velocities. Based on our findings, the implementation of these guidelines will contribute to safeguarding residents by minimizing exposure to toxic gas during chemical accidents.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.781-788
• /
• 2021

Due to the high sensitivity to radiation, excessive exposure needs to be prevented by accurately measuring the dose irradiated to the skin during radiation therapy. Although clinical trials use dosimeters such as film, OSLD, TLD, glass dosimeter, etc. to measure skin dose, these dosimeters have difficulty in accurate dosimetry on skin curves. In this study, to solve these problems, we developed a skin dosimeter that can be attached according to human flexion and evaluated its response characteristics. For the manufacture of the dosimeter, lead oxide (PbO) with high atomic number (Z_Pb: 82, Z_O: 8) and density (9.53 g/cm³) and silicon binders that can bend according to human flexion were used. In the case of a dosimeter made of PbO material, the performance degradation has been prevented by using parylene and others due to the presence of degradation due to oxidation, but the previously used parylene is affected by bending, so a new form of passive layer was produced and applied to the skin dosimeter. The characteristic evaluation of the skin dosimeter was evaluated by analyzing SEM, reproducibility, and linearity. Through SEM analysis, bending was evaluated, reproducibility and linearity at 6 MeV energy were evaluated, and applicability was assessed with a skin dosimeter. As a result of observing the dosimeter surface through SEM analysis, the parylene passive layer PbO dosimeter with the positive layer raised to the parylene produced cracks on the surface when bent. On the other hand, no crack was observed in the silicon passive layer PbO dosimeter, which was raised to silicon passive layer. In the reproducibility measurement results, the RSD of the silicon passive layer PbO dosimeter was 1.47% which satisfied the evaluation criteria RSD 1.5% and the linearity evaluation results showed the R² value of 0.9990, which satisfied the evaluation criteria R² 9990. The silicon passive layer PbO dosimeter was evaluated to be applicable to skin dosimeters by demonstrating high signal stability, precision, and accuracy in reproducibility and linearity, without cracking due to bending.