• 제목/요약/키워드: Hull-form design

검색결과 295건 처리시간 0.031초

B-Spline을 이용한 어선의 선수미부 초기 선형 설계 (Computer Aided Design of the Fore and After Body of Fishing Vessel by Using B-Spline)

  • 김동준;홍봉기
    • 수산해양기술연구
    • /
    • 제27권1호
    • /
    • pp.75-82
    • /
    • 1991
  • 어선의 초기 설계 단계에서 필요한 초기선형의 선수미부 생성을 위하여 B-spline 곡선과 형상계수를 결합한 방법을 적용하였다. 선수미부의 각부분에 대하여 선형별로 형상계수를 선정한 뒤 이를 이용하여 B-spline 곡선의 정점을 구하도록 하였다. 선수부분의 경우 bulbous bow를 가지는 경우와 그렇지 않는 것으로 크게 분류한 뒤 bulbous bow를 가지는 경우는 수선면 근처의 형상에 따라 2가지로 분류하였다. 수선면보다 윗부분에 대해서는 bulbuos bow와는 무관하므로 이의 유무에 상관없이 직선으로 갑판까지 가는 경우와 곡선을 가지는 경우로 분류하여 다루었다. 선미부분의 경우는 수선면 윗부분은 transom stern과 cruiser stern으로 분류하였으며 수선면이하의 부분은 선미 bulb를 가진 선형과 shoe piece를 가진 선형으로 분류하여 다루었다. 형상계수는 각 경우에 따라 반드시 지켜야 할 점의 좌표와 기울기 등이 우선 선정되었으며 곡선부의 볼록한 정도를 조절해 주는 계수들이 선정되었다. 형상계수를 이용하여 곡선을 생성시킬 기법으로는 다항식, cubic spline, parabolic blending, bezier curve, non-algebraic function 등이 있으나 연속성이 충분히 보장되고, 국부적으로 변형이 가능하며, 불연속점이 정의 및 직선의 표현이 가능한 B-spline을 선택하였다

  • PDF

KRISO 3600TEU 컨테이너 모형 주위의 국부유동 계측에 관한 연구 (Experimental Investigation of Local Flow around KRISO 3600TEU Container Ship Model in Towing Tank)

  • 반석호;김우전;김도현
    • 대한조선학회논문집
    • /
    • 제37권3호
    • /
    • pp.1-10
    • /
    • 2000
  • 저항 및 자항등의 유체성능이 뛰어난 선형을 개발하기 위해서는 선체에 작용하는 여러 방향의 힘은 물론 그러한 결과를 발생시키는 선체 주위의 유동 현상에 대한 이해가 필수적이다. 이러한 국부 유동 현상의 규명을 위해 일반 상선 및 특수선 주위의 전체 파형과 속도 분포 등의 국부 유동현상을 관측할 수 있는 종합적인 국부유동 계측 시스템이 개발되었다. 이를 사용하여 KRISO 3600TEU 컨테이너선(KCS) 주위의 국부유동을 계측하였다. 본 자료는 날씬하고 빠른 현대적인 상선의 유동을 이해하는데 매우 귀중한 자료일 뿐만 아니라 계산유체역학 기법을 이용한 계산 결과의 검증을 위해서도 매우 중요한 자료로 평가된다.

  • PDF

Strength Analysis of Mark III Cargo Containment System using Anisotropic Failure Criteria

  • Jeong, Han Koo;Yang, Young Soon
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제1권4호
    • /
    • pp.211-226
    • /
    • 2015
  • Membrane type Mark III cargo containment system (CCS) is considered in this study to investigate its strength capability under applied loads due to liquefied natural gas (LNG) cargo. A rectangular plated structure supported by inner hull structure is exemplified from Mark III CCS according to classification society's guidance and it is assumed as multi-layered structure by stacking plywood, triplex, reinforced polyurethane (PU) foam and series of mastic upon inner hull structure. Commercially available general purpose finite element analysis package is used to have reliable FE models of Mark III CCS plate. The FE models and anisotropic failure criteria such as maximum stress, Hoffman, Hill, Tsai-Wu and Hashin taking into account the direction dependent material properties of Mark III CCS plate components and their material properties considering a wide variation of temperature due to the nature of LNG together form the strength analysis procedure of Mark III CCS plate. Strength capability of Mark III CCS plate is understood by its initial failure and post-initial failure states. Results are represented in terms of failure loads and locations when initial failure and post-initial failures are occurred respectively. From the results the basic design information of Mark III CCS plate is given.

유조선 좌초 사고 시 2차사고 방지를 위한 잔류강도 평가기술 개발 (Development of an Empirical Formula for Residual Strength Assessment to Prevent Sequential Events of Grounded Oil Tankers)

  • 백승준;김상진;백점기;손정민
    • 대한조선학회논문집
    • /
    • 제56권3호
    • /
    • pp.263-272
    • /
    • 2019
  • The aim of this study is to develop a rapid calculation technique of the residual strength in order to prevent sequential events under grounding accidents. Very Large Crude-Oil Carrier (VLCC), Suezmax, and Aframax double hull oil tankers carrying large quantities of crude oil were selected for target structures. The rock geometries are chosen from the published regulation by Marine Pollution Treaty (MARPOL) of the International Maritime Organization (IMO). Oceanic rocks as the most frequently encountered obstruction with ships are applied in this work. Damage condition was predicted using ALPS/HULL program based on grounding scenario with selected parameters, i.e. depth of penetration, damage location and tanker type. The results of the scenarios are quantified to form an empirical formula which can evaluate the residual strength. The proposed formula is validated by applying a series of random grounding scenarios.

한국(韓國) 연근해어선(沿近海漁船)의 특성(特性) (Characteristics of Korean Inshore Fishing Boats)

  • 김극천
    • 대한조선학회지
    • /
    • 제8권1호
    • /
    • pp.67-94
    • /
    • 1971
  • Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.

  • PDF

선미 점성 유동장에 미치는 척고효과에 관한 연구 (Study on the Scale Effect of Viscous Flows around the Ship Stern)

  • 곽영기;민계식;오건제;강신형
    • 대한조선학회논문집
    • /
    • 제34권1호
    • /
    • pp.1-10
    • /
    • 1997
  • 본 연구는 실제 선박 주위의 점성 유동에 대해 RANS방정식을 사용하여 해석함으로써 그 계산 방법의 타당성 및 선형 설계에의 유효성을 입증하고, 모형선 크기에 따른 점성 유동의 영향, 즉 척도효과에 대한 기초 연구를 목적으로 하였다. 높은 레이놀즈수에서의 난류유동을 계산하기 위해 k-${\varepsilon}$ 난류모형을 채용하였으며, 물체 근처에서는 벽법칙을 사용하였다. 선체의 3차원 형상을 효과적으로 처리하기 위해 물체적합좌표계를 이용하여 실제영역에서 유도된 지배방정식을 계산영역으로 변환시켰으며, 유한체적법을 사용하여 이산화시켰다. 압력 계산은 SIMPlE법을 사용하였으며, 이산화된 식들은 TDMA를 이용한 선순법으로 해를 구하였다. 실제 계산대상 선박은 4410 TEU급 콘테이너 운반선과 50,000 DWT급 살물 운반선으로 모형선 크기와 실선 크기에 대해 점성유동을 해석하여 비교하였으며, 모형선에 대해서 저항시험, 프로펠러 면에서의 반류분포 조사 시험, 그리고 한계유선 조사시험을 수행하여 계산결과와 비교 검토하였다. 계산결과는 선미 유동장에서의 평균속도와 압력 분포에 있어서 선미 형상에 따른 효과와 척도효과를 잘 묘사하고 있다. 특히, 계산된 프로펠러 변에서의 반류분포와 선체 표변에서의 한계유선 분포는 실험과 정성적으로 잘 일치하고 있으며, 점성저항 추정에 있어서는 실험 값과 ${\pm}5%$ 이내로 예측하고 있음을 보여 주고 있어 선형 개발의 설계 도구로 활용될 수 있음을 알 수 있다.

  • PDF

CFD를 이용한 Wake Equalizing Duct의 최적설계 (Design Optimization of Wake Equalizing Duct Using CFD)

  • 이호성;김동준
    • 한국해양공학회지
    • /
    • 제25권4호
    • /
    • pp.42-47
    • /
    • 2011
  • In this paper, wake equalizing duct (WED) form optimization was carried out using computational fluid dynamics (CFD) techniques. A WED is a ring-shaped flow vane with a foil-type cross-section fitted to a hull in front of the upper propeller area. The main advantage of a WED is the power savings resulting from the uniformity of the velocity distribution on the propeller plane, a reduction in the flow separation at the aft-body, and lift generation with a forward force component on the foil section. This paper intends to evaluate these functions and find an optimized WED form for minimizing the viscous resistance and equalizing the wake distribution. In the optimization process, the study uses four WED parameters: the angle of the section, longitudinal location, and angles of the axes for the half rings against the longitudinal and transverse planes of the ship. KRISO 300K VLCC2 (KVLCC2) is chosen as an example ship to demonstrate the WED optimization. The optimization procedure uses genetic algorithms (GAs), a gradient-based optimizer for the refinement of the solution, and Non-dominated Sorting GA-II(NSGA-II) for Multiobjective Optimization. The results show that the optimized WED can reduce the viscous resistance at the expense of the uniformity of the wake distribution.

5,000ton급 해양실습선 개발 (Development of 5,000ton class Marine Training Ship)

  • 정석호;신영균;박명규;전호환
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.36-41
    • /
    • 2004
  • STX Shipbuilding Company is under construction design the marine training ship if Korea Maritime University. Processing q this training ship development, model test results and design if general arrangement results are introduced in this paper.

  • PDF

선수부 선체형상 모델링을 위한 스키닝 연구 (Skinning for Ship Forebody Modeling)

  • 정형배;김찬석
    • 대한조선학회논문집
    • /
    • 제43권3호
    • /
    • pp.375-383
    • /
    • 2006
  • This paper presents NURBS skinning for the forebody of ship. NURBS skinning is guessed as a good method to generate the faired surface of ship forebody, but it is very problematic in real ship design to generate resonable surface of ship forbody using skinning, because there are lot of problem to apply skinning and to get reasonable surface. One of main problem is data arrangement with design data. Irregular serial contour data arise so serious compatibility problem of knot vector This paper suggests a whole process using skinning successfully in generating hull form of ship forebody This process includes how to make the data set for skinning and how to execute compatibility procedure.

예인수조 시험 및 VPP 계산에 의한 세일링 요트의 성능 추정 (Performance Predictions for Sailing Yacht by Towing Tests and VPP Calculation)

  • 유재훈;안해성
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권1호
    • /
    • pp.116-124
    • /
    • 2006
  • A model test was carried out, in order to verify the hydrodynamic performances of public 30 feet class sailing yacht. In the initial design stage, the performances and the running attitude of sail yacht including the hull form and sail plan, appendages were estimated by VPP, from which made the representative test conditions. A new experiment system such as captive model device was composed because the running attitude could be changed by wind conditions. The test results show that the minimum resistance is generated in the heeling 20 degree. which was expected in the initial design stage. It is thought to be the useful informations that the keel has an effects on hydrodynamic forces and resistance differences between the upwind and the downwind condition. Also this paper is associated with the state-of-the-art of calculating sailing yacht performance as this is performed in velocity Prediction program (VPP) The VPP results shows a typical shape of a sailing yacht and the designed yacht has the best performance at 120 degree angle of true wind with 20 knots.