• 한국항해학회지
• /
• 제18권4호
• /
• pp.59-81
• /
• 1994

Korean property and liability insurance companies have underwrited hull insurance without proper undrewriting ability. But after April 1996. in case of Korean insurance market being opened the companies have to make hull insurance rate by themselves. Accordingly, in this study, the writer embodies important factors in making hull insurance rate by an empirical survey. In empirical survey, the writer used a questionnaire, 74 proper data was obtained from 96 officers working in making hull insurance rate in 12 Korean property and liablity insurance companies and 24 the foreign companies at home. Reliability was tested by Cronbach's Alpha and a conceptual validity by Factor Analysis. Hypothesis estabilished in this study was tested by Correlation and Multiple Regression Analysis. Results of testing hypothesis are as follows: Firstly, the traits of insurer and the assured influence significantly(P<0.05) on making hull insurance rate. Secondly, expected loss ratio, ship manager, ship's age, insured amount, level of the cost of repairing and salvage, shipowner, period of insurance, level of overseas rating, profit and expense, trading limits, ship's classification, conditions of insurance, and ship's size influence significantly(P<0.05) on making hull insurance rate.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.381-387
• /
• 2003

가압 경수로 사용후핵연료봉을 재처리하는 과정에서 발생되는 hull은 고준위 방사성폐기물로 분류되고 있다. 본 논문에서는 연소도 32,000MWd/tU, 냉각기간 15년(고리 1호기 cycle 4-7)인 PWR 사용후핵연료의 건식처리 공정에서 발생한 hull에 대하여 방사능적 특성 실험을 수행하였고, 문헌 조사 및 관련 코드의 계산을 통하여 가압 경수로 사용후핵연료 hull에 대한 방사화학적 특성을 조사하였다. 이를 토대로 hull에 부착되어 있는 핵물질을 레이저 또는 플라즈마 등의 건식 방법으로 제거함으로써 hull의 방사능을 저감시켜 중저준위 폐기물화하는 방안을 제시하였다.

• 대한조선학회논문집
• /
• 제59권4호
• /
• pp.192-199
• /
• 2022

With the advent of autonomous ships, it is emerging as one of the very important issues not only to operate with a minimum crew or unmanned ships, but also to secure the safety of ships to prevent marine accidents. On-site inspection of the hull is mainly performed by the inspector's visual inspection, and video information is recorded using a small camera if necessary. However, due to the shortage of inspection personnel, time and space constraints, and the pandemic situation, the necessity of introducing an automated inspection system using artificial intelligence and remote inspection is becoming more important. Furthermore, research on hardware and software that enables the automated inspection system to operate normally even under the harsh environmental conditions of a ship is absolutely necessary. For automated inspection systems, it is important to review artificial intelligence technologies and equipment that can perform a variety of hull failure detection and classification. To address this, it is important to classify the hull failure. Based on various guidelines and expert opinions, we divided them into 6 types(Crack, Corrosion, Pitting, Deformation, Indent, Others). It was decided to apply object detection technology to cracks of hull failure. After that, YOLOv5 was decided as an artificial intelligence model suitable for survey and a common hull crack dataset was trained. Based on the performance results, it aims to present the possibility of applying artificial intelligence in the field by determining and testing the equipment required for survey.

• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.129-137
• /
• 2013

Each owner or operator of offshore products uses a maintenance management system like CMMS(Computerized Maintenance Management System) in order to manage their assets effectively and efficiently for a long time. But most of maintenance management systems have been focused on machinery items, not on 'Hull' until now. On the other hand, classifications like ABS, DNV, GL are having a sale on hull inspection and maintenance system for ships and an interest in hull maintenance system is increasing because of the application of EDD(Extended Dry Docking). This paper discusses the concept, inspection process and the practical application of Hull maintenance for Semi-submersible drilling rig to extend the service life and run a stable operation.

• 한국항해학회지
• /
• 제23권1호
• /
• pp.29-43
• /
• 1999

The production process of the compound-curved hull plates includes hull design, definition, fairing, modeling, lofting, cutting, and forming in sequence. Traditional fabrication methods and shop environment caused low level to productivity in medium and small sized shipyards. The most effective solution to solve those problems is to rationalize the layout of facilities. For the well-balanced development of domestic shipbuilding industry, it is urgently required to reduce the gap between modernized large sized shipyards and traditional small and medium sized shipyards in production technologies and efficiencies. For the efficient and accurate hull piece forming, all information from design to forming should be clarified and organized in a systematic manner. Thus, management of the information plays an important role in the computerized and automated of hull piece forming. The object of this paper is to survey the status of the field, to find out the feasibility and to introduce a draft of hull piece fabrication line for small and medium sized shipyards. The development of required system follows the object oriented technology to extend to simulation based system for carrying out physical product flow and facilities layout analysis. It is feasible to operate such a modernized facility for a group of small and medium shipyards who are unable to have each of their own facility because of its large amount of initial investment and insufficient work load.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.88-94
• /
• 2003

A series of tests of 5 model ships, selected from a data survey of 10 Gross Tonnage actual fishing boats, were performed in two circulating water channels (Chosun University in Korea and WJFEL in Japan), in order to develop the basic hull form of a 25 knots-class fishing boat. Resistance tests, trim and sinkage measurements and wave pattern observations etc., were included in each I1wdel test, and the model test results were compared and analyzed. The result was as follows: P-4 hull form ship changed into Deep V type bow is the best hull form with good performance, especially with regard to ship's resistance efficiency.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.130-139
• /
• 2004

The cladding materials remaining after reprocessing process of the nuclear fuel, generally called as hulls, are classified as a high-level radioactive waste. They are usually packaged in the container for disposal after being compacted, melted, or solidified into the matrix. The efforts to fabricate a better ingot for a more favorable disposal to the environment have failed due to the technical difficulties encountered in the chemical decontamination method. In the early 1990s, the accumulation of radio-chemical data on hulls and the advent of new technology such as a laser or plasma have made the pre-treatment of the hulls more efficient. This paper summarizes the information regarding the radio-chemical analysis of the hull through a literature survey and determines the characteristics of the hull and depth profile of the radio-nuclides within the hull thickness. The feasibility study was carried out to evaluate the reduction of the radioactivity by peeling off the surface of the hull with the application of laser technology.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.1073-1074
• /
• 2012

최근 인터넷의 발달과 사용량의 증가로 데이터의 양이 급증함에 따라 대용량 데이터를 효율적으로 검색하는 top k 질의 처리가 중요시 되고 있다. Layer 기반 방법은 가장 잘 알려진 top k 질의처리 방법이며, 객체의 모든 속성의 값들을 이용하여 객체들을 layer들의 리스트로 구성하는 방법이다. 본 논문에서는 그 중에서 convex hull을 사용하여 layer list를 생성하는 기존 연구를 조사하고 문제점을 파악한다.

• 선박안전
• /
• 제14권
• /
• pp.44-64
• /
• 2004

This Surveyor's Glossary of Hull Terms is intended as a guide to improve the standardization of survey reporting. It is recommended that the listed terms for hullstructural elements are used throughout report narratives.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.727-734
• /
• 2001