• Journal of the Korean institute of surface engineering
• /
• v.27 no.6
• /
• pp.340-346
• /
• 1994

The method of uniforming current distribution in Hull cell are studied by using auxiliary anode, current shield bipolar electrode, and combinings bipolar electrode with current shield in order to find a way of uni-form deposition. The current density distributions are measured by each ammeter of the same inner resistance connected to divided cathode pannel respectively. The current density distributions of cathode electrode divided into five sections with 5mm width have a tendency of linear inclination, and that of twenty sections have a tendency of smoother curve than the curve of original Hull cell pannel. Their results showed lower value on the high current density portion and higher value on the low portion than that original Hull cell pannel. The current distribution in Hull cell is able to unify by using auxiliary anode, or combining bipo-lar electrode with current shield, but not efficient in using one of both individually.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.29-32
• /
• 2008

Hinged cross bar which is fitted for buyer's special item in cell guide of container vessels has an advantage of efficiency on container loading. In this paper, the main focus is to confirm the structural adequacy of hinged cross bar supporting structure in cell guide under the considered loading condition for container vessel.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.139-139
• /
• 2012

전기도금으로 얻어진 금속표면 특성은 도금액의 온도, pH, 도금액 조성, 첨가제 등과 같은 여러 종류의 도금인자 및 조건에 따라 달라진다. 그중에서 가장 영향을 많이 미치는 것이 도금중에 인가되는 전류밀도이다. 이러한 영향에 대해 연구하고자 많은 도금 개발자들은 Hull Cell을 사용하고 있다. Hull Cell 시험은 한 번의 실험으로 높은 전류밀도에서부터 낮은 전류밀도에 이르기까지 규칙적인 전류밀도로 1개의 음극표면에 도금 되도록 하여 도금된 표면을 관찰함으로써 도금 상태를 비교평가 할 수 있게 한 것이다. 하지만 헐셀자에 사용하고 있는 전류밀도 분포 기준은 도금 용액의 종류에 관계 없이 하나의 헐셀식에 의해 표현되고 있다. 하지만 도금용액의 종류에 따라 분극특성이 다르며 이로 인해 헐셀 실험에서의 2차 전류밀도 분포가 달라지게 된다. 따라서 보다 정확한 평가 및 분석을 위해서는 도금용액에 대한 특성이 고려된 전류밀도 분포 기준이 필요하다. 이에 본 연구에서는 Hull Cell 실험에서 도금 용액별로 정확한 헐셀자를 제공하기 위해 기존 헐셀자의 전류밀도 분포와 분극특성을 고려한 2차 전류밀도 분포를 시뮬레이션을 활용하여 비교분석 하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.124-131
• /
• 2008

This paper presents the analysis of resistance performance and bow waves for the resistance-minimized hull form of small fishing boat by using numerical simulations and model tests. The resistance-minimized hull form is developed from an original hull form which is selected from existing small fisher boats in our country. In order to estimate the resistance performance for the original and the developed hull form, several numerical simulations and model tests are carried out. Marker and Cell(MAC) method and Marker-Density method are adopted to simulate the free-surface bow waves around advancing hull surface. The results of numerical simulations are compared with the model tests in towing tank. The results show that the resistance performance of the resistance-minimized hull form is improved than that of the original hull form. The results of this study will be a good guide to the hull form development of small fishing boats in future.

• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.297-303
• /
• 2011

In order to confirm the biological activities of rice bran and hull, total phenolic content, antioxidant and anticancer activities were examined in three rice varieties that have different seed coat colors such as brown, black, and purple. The antioxidant activity was measured by free radical scavenging assay including DPPH, $ABTS^+$ and reducing power activity. The anticancer activity was evaluated by WST assay with human HepG2 cell lines. As the result, Huegjinju, black seed coat rice, showed higher of the total phenolics contents in both bran and hull, than purple Jeojinju and brown Ilpum. In the antioxidant activity, Heugjinju showed the highest among the bran extracts, but the activities of hull extracts were similar in three varieties. In the anticancer activity to HepG2 cell line, the hull extract was 20% higher than that of bran extract in the average of three varieties. The hull extracts of Ilpum and Jeokjinju showed similar anticancer activites about 92%, and that of Heugjinju showed the lowest activity of 30.4%. The anticancer activities of hull extracts in three varieties showed positive correlation with total phenolics contents, DPPH radical scavenging activities and reducing power activities. In conclusion, the rice bran and hull showed potent antioxidant and anticancer activities varied in three varieties that have different seed coat colors.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.301-305
• /
• 2010

In this study, the alkaline degreasing agent was developed for electroplating pretreatment process, and the efficiency and the durability was predicted. The alkaline deeping degreasing agent was prepared by blending sodium hydroxide (NaOH), sodium carbonate ($Na_2CO_3$), sodium silicate ($Na_2SiO_3$), and sodium lauric sulfate (SLS). The performance tests of the degreasing agent were evaluated in the $40{\sim}50^{\circ}C$ of the degreasing temperature and 30~40 min of the degreasing time. The efficiency and durability of the prepared degreasing agent were tested by the waterdrop formation test and Hull-cell plating test. The optimum ratio of alkaline degreasing agent was NaOH (30 g/L) + SLS (6.0 g/L) + $Na_2SiO_3$ (2.0 g/L) + $Na_2CO_3$ (40 g/L). Also, the optimum degreasing conditions were $50^{\circ}C$ of the degreasing temperature and 35 min of the degreasing time.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.150-157
• /
• 2006

The alternate plating method was suggested by a tin-cobalt alloy plating process which has excellent mechanical characteristics and also favorable to environment. Tin-cobalt alloy plating has many advantages such as nontoxicity, variable color-tone, and no post-treatment process. In this study, the plating conditions such as temperature, pH, current density, plating time, and amount of additive (glycine) were determined in the tin-cobalt alloy plating process through Hull-cell test and surface analysis. As the result of Hull-cell analysis, brightness became superior as the amount of glycine increased. It was found that the optimum alloy ratio was 0.03 M of $SnCl_{2}{\cdot}2H_{2}O$ and 0.05 M of $CoSO_{4}{\cdot}7H_{2}O$ at $50^{\circ}C$, pH 8.5, and $0.5A/dm^2$. The optimum amount of additive was 15 g/L of glycine and 0.1 g/L of organic acid. Then, the solution including glycine was recommended as an optimum plating solution for a chromium plating process.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.71-78
• /
• 2023

The possibility of improving plating thickness distribution was investigated through quantitative consideration of bipolar electrodes without external power applied. By having the cathode tilted with respect to the anode, the potential distribution in the electrolyte solution adjacent to the cathode is different due to the difference in iR drop due to the path difference to the anode in each region of the cathode. The purpose of this study is to observe the bipolar characteristics in the case of an auxiliary anode for the non-uniform potential distribution of such a Hull cell. In particular, in order to evaluate the possibility of improving the non-uniform thickness distribution of the cathode by utilizing these bipolar characteristics, it was verified through experiments and simulations, and the electric potential and current density distribution around the bipolar electrode were analyzed. The electroplating in a Hull cell was performed for 75 min at a current density of 10 mA/cm², and the average thickness is about 16 ㎛. The standard deviation of the thickness was 10 ㎛ in the normal Hull cell without using the auxiliary anode, whereas it was 3.5 ㎛ in the case of using the auxiliary cathode. Simulation calculations also showed 8.9 ㎛ and 3.3 ㎛ for each condition, and it was found that the consistency between the experimental and simulation results was relatively high, and the thickness distribution could be improved through using the auxiliary anode by the bipolar phenomenon.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.6
• /
• pp.633-637
• /
• 2005

The effects of adding hull powders of black soybean on quality characteristics of tobu were studied. Proximate composition of the black soybean hull powders was crude ash, crude protein, crude fat, and carbohydrate at 2.60, 11.35, 2.18, and 73.97%, respectively. The addition of 5% black soybean hull powder decreased the production of whey and consequently increased the yield of tobu. Texture properties of evaluation hardness, adhesiveness, chewiness were the best in tobu which was made with 5% black soybean hull powders. Sensory evaluation showed texture, firmness were not significantly different among tobu with yellow soybean, black soybean, and added to 0.5% black soybean hull powders. At the beginning of the period of storage, there were not differences of microbial cell count as increasing black soybean hull powders, but observed after passing 5 days. The results of total microbial cell count showed that adding 5% black soybean hull powders in processing tobu extend storage time.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.48-55
• /
• 2000

A basic research of air bubble locus around the ship hull is performed to know the bubble's behavior which is generated around the hull surface. In this paper. bubble's behavior around the ship hull is calculated and experimented with the variation of bubble size and the location of bubble generation. For the use of the equation for bubble locus, Kawakita's equation which include the effect of bubble buoyancy is adopted. For the numerical simulation. a finite difference method based on the MAC method is used. Also experiments are performed about series 60 hull form at CWC. The results of calculation are compared with those of experiment.