• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.32-39
• /
• 2021

Korean coastal fishery suffers from profitability degradation due to a decrease in fisheries resources, pollution in coastal waters, fuel coast increase, and market opening for aquaculture products. The next generation Korean fishing vessel aims at the improvement of energy efficiency, enhancement of crew welfare, and safety. These purposes can be accomplished by adopting a new standard hull form with improved resistance performance and a modernized residence facility on the deck. In order to improve resistance performance, this study attempts to optimize design variables for stern flaps for three kinds of fishing vessels - coastal multi-purpose, coastal trap, and dredged nets. A series of model tests for these fishing vessels was carried out in the towing tank of Pusan National University. The results indicate that for some cases, the stern flap caused the stern trim of the vessel to decrease, leading to the resistance reduction.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권2호
• /
• pp.159-164
• /
• 2016

해상에서 사고선박을 예인할 때 피예인선의 저항을 추정하는 것은 중요한 과정의 하나이다. 피예인선에는 선체 자체의 기본 저항 외에 각종 부가저항이 있는데, 가장 큰 성분중의 하나로 파랑에 의한 부가저항을 들 수 있다. 본 논문에서는 ISO 15016 표준의 이론해석 방법에 의해 사고 선박 예인시 파랑중 부가저항을 추정하는 알고리즘을 정립하고, 이를 전산 프로그램으로 구현하였다. 예제 선박의 계산 결과를 기존의 표준 결과와 비교하였고, 이 알고리즘과 전산 프로그램은 실제로 사고 선박의 저항과 이에 따른 예인력 추정시 사용하기에 적절한 것으로 판단되었다.

• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.20-25
• /
• 2015

Clad steel has good corrosion resistance and mechanical properties arising from the hot rolling of dissimilar metals, such as carbon steel and stainless steel. However both good corrosion resistance from the cladding plate material(stainless steel) and mechanical properties from the base plate material (carbon steel) are difficult to obtain because the different steels display opposite behaviors during the cladding process. In order to make clad steel for application in the hulls of ships, proper materials selection and heat-treatment conditions are necessary. In this study, mechanical properties of base plate materials with different chemical composition were evaluated according to heat condition of cladding plate material.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.29-34
• /
• 2000

This paper describes a numerical study to make clear the characteristics of flow around a high speed catamaran hull advancing on calm water. The simulation is carried out at Froude number of 0.5 with a separation to length rations of 0.2 to 0.5. To simulate the flows, the Navier-Stokes solver is employed in which the free surface condition is included. Computations are performed in a rectangular grid system based grid system based on the Marker & Cell method. For the validation, the computation results are compared with the experiments.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.71-75
• /
• 2002

In this paper, a study on the principal performance of the purse seiner ship in two vessel formations was conducted. For this task, the outline of the purse seiner fishing system in two vessel formations was reviewed. At the same time, based on the general arrangement plan, hull from of the main vessel was developed. And the stability and ship motion characteristics of the ship design were estimated. Finally, to verify the characteristics of the resistance and self-propulsion coefficient, a model test in a circulating water channel was performed. As n result, it is anticipated that this presentation will be used as the foundation material for research of purse seiner.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.57-64
• /
• 2015

This paper describes a volume of fluid(VOF) method, mRHRIC for the simulation of free surface flows around ship hulls and provides its validation against benchmark test cases. The VOF method is developed on the basis of RHRIC method developed by Park et al. that uses high resolution differencing schemes to algebraically preserve both the sharpness of interface and the boundedness of volume fraction. A finite volume method is used to solve the governing equations, while the realizable ${\kappa}-{\varepsilon}$ model is used for turbulence closure. The present numerical results of the resistance performance tests for DTMB5415 and KCS hull forms show a good agreement with available experimental data and those of other free surface methods.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.102-107
• /
• 2012

In this study, the design procedure of hybrid active mount by an electro-magnetic actuator is proposed to reduce the transmitted force from naval shipboard equipment to ship hull structure. The hybrid type mount which is composed of a passive rubber element and an electro-magnetic actuator is introduced and, through the vibration measurement for the objective pump system, the required force of the actuator is computed and discussed in detail. The initial designs were supposed for three types, one is moving coil type actuator and the others are moving permanent magnet type actuators. Based on the initial design concept, the final designs considering shock resistance and interference with mover and stator are proposed and examined.

• 대한조선학회지
• /
• 제21권3호
• /
• pp.11-18
• /
• 1984

In recent days, many manufacturing factories have been established and operated along riversides or on sea coasts. In consequence thereof, modern inland vessels with their small draught but large carrying capacity have been developed to operate as a single unit or in convoy with a barge. Knowledge in the behaviour of inland cargo vessels in shallow water exists presumably in U.S.A., U.S.S.R. and West Germany Literature available on this subject is quite limited. Model tests were carried out, both in calm water and in waves to obtain hull lines, which not only improve the seaworthiness of inland vessels but also permit to run in convey with other vessels on inland waterways. The results, which to some extent have also been tested in full scale, are entirely satisfactory. This paper discribes the resistance of some newly developed inland water cargo vessels.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.36-43
• /
• 1996

In this work, a panel method is described, which cart solve the flow field round a surface-piercing body that experiences lift and wave resistance. As the body boundary condition, a Dirichlet type is employed, and as the free surface boundary condition the Poisson type is implemented, while in its discretization Dawson's 4-point upwind difference scheme is utilized, and as the Kutta condition a Morino-Kuo type is chosen. As to the type of singularity, source panels are distributed on the free surface, and source and dipole panels on the body surface, and dipole panels on the wake surface. For a sample run, a catamaran of the parabolic Wigley hull is chosen, for which experimental data are available, and the predictions by the numerical means and by the experiment are compared for a wide range of parameters.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.95-99
• /
• 1997

In these days, the pollution of marine environment near island at Korean coastal zone caused by the trash human waste and livestocks excreata become intensified. One of the most economic and efficient way to prevent this pollution problem is to set up island circulating incineration system. In this paper, the result of feasibility study on the application of turtle boat hull form to the incinerating vessel has been summarized especially for the resistance and course keeping point of view.