• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.115-121
• /
• 2007

The aeroelastic analysis of rotor blades with trailing edge flaps, focused on reducing vibration while minimizing control effort, are investigated using large deflection-type beam theory in forward flight. The rotor blade aerodynamic forces are calculated using two-dimensional quasi-steady strip theory. For the analysis of forward flight, the nonlinear periodic blade steady response is obtained by integrating the full finite element equation in time through a coupled trim procedure with a vehicle trim. The objective function, which includes vibratory hub loads and active flap control inputs, is minimized by an optimal control process. Numerical simulations are performed for the steady-state forward flight of various advance ratios. Also, numerical results of the steady blade and flap deflections, and the vibratory hub loads are presented for various advance ratios and are compared with the previously published analysis results obtained from modal analysis based on a moderate deflection-type beam theory.

• 농촌계획
• /
• 제15권3호
• /
• pp.33-45
• /
• 2009

This study tried to establish a tentative renewal guideline on spatial structure of the Hub-myun's center villages which would be positioned as sub-centers in the rural settlement hierarchy in Korea. Space Syntax Method was used to analyze the locational characteristics of community facilities in the center villages of 8 pilot project areas which were selected in the nationwide scale. The base-maps for spatial analysis works were prepared firstly from satellite pictures and adjusted through field check. Generally, connectivity and global integration values of center villages were calculated as higher than hinterland villages, which would mean better accessible spatial characteristics in the center villages. And a tentative renewal guideline was proposed for road route improvement and relocation of community facilities in the Hub-myun's center villages.

• 한국CDE학회논문집
• /
• 제16권6호
• /
• pp.414-423
• /
• 2011

The collaboration hub has been developed since 2004 as an online collaboration space, which supports the various collaborative works amongst small and medium enterprises using information sharing, collaboration project management, and project history management. Because of the change of manufacturing environment and rapid development of information technologies, it should be evolved from the existing version called Collaboration Hub 1.0. Recently, a lot of manufacturing enterprises know the importance of business process management(BPM) and start to introduce BPM systems. Our research group has developed the new version of Collaboration Hub 1.0 called Collaboration Hub 2.0 which contains the BPM concept, the consistent product data management, and the specialized functions overcoming the various variation of manufacturing. This study scrutinizes the meaning and role of the Collaboration Hub 2.0 and introduces an application study of it to the value chain of automobile module development consisted of a leading company and subcontractors. The case study covers the definition, execution and monitoring of collaboration process, the specialized functions overcoming the manufacturing variation and the key performance index of collaboration business.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.98-105
• /
• 2005

본 논문은 복합재 패들형 블레이드를 장착한 무힌지 허브 시스템의 정지 및 전진 비행시 공력탄성학적 안정성 시험에 대한 것이다. 블레이드와 허브 flexure의 리드래그 감쇠비를 측정하기 위해 무힌지 허브시스템을 한국항공우주연구원의 GSRTS(General Small-scaled Rotor Test System)에 장착하여 가진 시험을 실시하였다. 리드래그 모드의 감쇠비를 산출하기 위해 MBA(Moving Block Analysis)기법을 사용하였다. 먼저 금속재 flexrue를 장착하여 시험을 수행한 후, 로터시스템의 동력학적 특성이 같도록 설계된 복합재 flexure를 장착하여 시험하였다. 시험은 정지 및 전진비행 조건에 따라 지상 및 풍동에서 수행하였다. 비회전 시험을 통해 복합재 flexure의 감쇠특성이 금속재보다 향상됨을 확인하였으며, 모든 시험 조건에 대해 복합재 flexure가 금속재보다 무힌지 허브시스템에 대한 공력탄성학적 안정성이 향상됨을 확인하였다.

• Journal of Astronomy and Space Sciences
• /
• 제14권2호
• /
• pp.367-374
• /
• 1997

Slewing maneuver and vibration suppression control of flexible spacecraft model by Lyapunov stability theory are considered. The specific model considered in this paper consists of a rigid hub with an elastic appendage attached to the central hub and tip mass. Attitude control to point and stabilize single axis using reaction wheel type device is tested. To control all flexible modes is so critical to designing an active control law. We therefore considered an direct output feeback control design by using Lyapunov stability theory. It is shown that the ouput feedback control law design with proposed configuration gives satisfactory result in slewing performance and vibration suppression control.

• 한국항공우주학회지
• /
• 제38권6호
• /
• pp.612-619
• /
• 2010

본 연구에서는 비선형 유한요소법을 사용하여 헬리콥터용 구형 탄성체베어링을 설계하였다. 탄성체베어링은 헬리콥터 로터허브의 주요부품으로 로터블레이드의 플래핑운동, 래그운동, 피치운동의 힌지 역할을 한다. 탄성체베어링은 고무판과 금속판으로 구성된다. 탄성체 베어링은 고무의 탄성변형을 이용하여 힌지 역할을 하기 때문에 강성설계가 중요하다. 따라서 탄성체베어링은 로터허브 베어링의 강성요구 조건을 만족하도록 설계되어야한다. 본 연구에서는 구형의 탄성체베어링의 효율적인 설계를 위하여 유한요소모델 생성 알고리즘을 개발하고, 단일 고무판의 강성 특성을 분석을 수행하였다. 끝으로, 본 연구에서 설계한 탄성체베어링의 헬리콥터 로터허브용으로 적합한지 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.575-580
• /
• 2004

In this work, the effect of composite couplings and mass distributions on hub loads of a hingeless rotor in forward flight is investigated. 1'he hingeless composite rotor is idealized as a laminated thin-walled box-beam. The nonclassical effects such as transverse shear and torsion warping are considered in the structural formulation. The nonlinear differential equations of motion are obtained by applying Hamilton's principle. The blade responses and hub loads are calculated using a finite element formulation both in space and time. The aerodynamic forces acting on the blade are calculated using the quasi-steady strip theory. The theory includes the effects of reversed flow and compressibility The magnitude of elastic couplings obtained by MSC/NASTRAN is compared with the classical pitch-flap($\delta$$_{3}$) coupling. It is observed that the elastic couplings and mass distributions of the blade have a substantial effect on the behavior of $N_{b/}$rev hub loads. About 40% hub loads is reduced by tailoring or redistributing the structural properties of the blade.f the blade.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.734-740
• /
• 2004

In this work, the effect of composite couplings and mass distributions on hub loads of a hingeless rotor in forward flight is investigated. The hingeless composite rotor is idealized as a laminated thin-walled box-beam. The nonclassical effects such as transverse shear and torsion warping are considered In the structural formulation. The nonlinear differential equations of motion are obtained by applying Hamilton’s principle. The blade responses and hub loads are calculated using a finite element formulation both in space and time. The aerodynamic forces acting on the blade are calculated using the quasi-steady strip theory. The theory includes the effects of reversed flow and compressibility. The magnitude of elastic couplings obtained by MSC/NASTRAN is compared with the classical pitch-flap($\delta$$_3$) coupling. It Is observed that the elastic couplings and mass distributions of the blade have a substantial effect on the behavior of $N_{b}$ /rev hub loads. About 40％ hub loads is reduced by tailoring or redistributing the structural properties of the blade.e.

• 한국항공우주학회지
• /
• 제42권5호
• /
• pp.390-397
• /
• 2014

BO-105 헬리콥터는 무힌지 로터 허브시스템이 적용되었으며, 블레이드의 루트 영역이 무힌지 허브 시스템의 플렉셔에 해당한다. 따라서 본 블레이드를 이용한 훨타워 시험 수행을 대비하여 굽힘 강성이 낮은 플렉셔 부분에 대한 굽힘 강성 보강을 수행하였다. 플렉셔 굽힘 강성 보강 수행을 위해 플렉셔 부분의 단면 형상을 모델링하여 굽힘 강성을 계산하였으며, 이를 바탕으로 강성 보강을 위한 복합재의 두께를 선정하였다. 보강된 플렉셔의 실제 굽힘 강성을 확인하기 위하여 강성보강 전 형상에 대한 강성 측정 시험과 강성보강 이후 형상에 대한 강성 측정 시험을 수행하여 결과를 비교하였다.

• 항공우주정책ㆍ법학회지
• /
• 제12권
• /
• pp.246-274
• /
• 2000

This paper discusses the qualification criteria for international hub airport and suggests the strategies for Inchon International Airport (IIA) to be the hub airport in the East Asia. Recently, many East and Southeast Asia countries have invested on large scale international airports like Chap Lak Kok airport, Pudong airport etc.. as Korea have done on IIA. IIA to be open in 2001 will face a serious competition with these airport. Being a hub airport requires geographic proximity. sufficient volume of local traffic. uncongested infrastructure, a good accessibility to surrounding industrial centers. high quality of service to the airline. In order to promote airlines to land at IIA. Korea Government need to establish Open Sky Policy to many countries and national flag carriers of Korea need to be involved in a global alliance. Developing vicinity of IIA as free trade zone will generated more local traffic which makes IIA as more attractive candidate for airlines. The Korea airspace is one of the most restricted area in the world becuase of the national security. which limits civil aircraft maneuvers. The airspace need to be re-structured to exploit the full capacity of IIA.