• Transactions of Materials Processing
• /
• v.5 no.3
• /
• pp.219-231
• /
• 1996

The current five-stage cold extrusion process to produce an axle-housing is investigated for the purpose of improved process. The main goal of this study is to obtain an appropriate reduced process sequence which can produce the required part most economically without tensile crack-ing workpiece buckling and overloading of the tools. The current process sequence is simulated and design criteria are examined. during the simulation several remeshings are done due to severe mesh distortions, Based on the results of simulations of the current five-stage process, design strategy for improving the process sequence are developed using the thick hollow pipes. The finished product of an axle-housing is produced in two operations and one annealing treatment while the conventional sequence consists of five operations and one annealing treat-ment. Also die loads of the new process are compared with those of the current one.

• Journal of the Korean housing association
• /
• v.17 no.3
• /
• pp.79-87
• /
• 2006

The purpose of this study is to propose an architectural design process adopting design concepts with weight on them. The process of the study is as follow; First, design concepts for the study are classified by the hierarchy. Developing process of those design concepts which had been adopted for a creative thinking was investigated. Second, after putting different weight on diverse design concepts, this study propose a design process adopting design concepts with different weight. Finally, the proposed process adopting design concepts with weight was verified through a case study of elementary school project. The case study was carried out by questionnaires 3 times. Experimental results verified the hypothesis which was about the process adopting design concepts with different weight. Architects can precede their design process with confidence about setting design concepts by the result of this study.

• Journal of the Korean association of regional geographers
• /
• v.15 no.6
• /
• pp.736-751
• /
• 2009

China is in the process of carrying out socialist planned economic system and capitalist market economic system along with its reforms and opening. In the process, the problem of poverty is surfacing along with the commercialization of housing. In this study, we've analyzed China's social security system through literature at home and abroad based on the concept of place poverty, and have pointed out the characteristics and problems of Chinese urban housing reform centered around what we've identified. Furthermore, we've divided up China into 8 zones, and have examine the characteristic of each area by population & social index, economic index, and housing index. As a result of analysis, the process of urban housing reform had an effect on housing poverty, and appeared to have different characteristics by zone. In this study, since China's situation by area is very diverse, it presents a point that we must approach with not a monistic method but a pluralistic method regarding housing policy.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.245-245
• /
• 2004

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.345-348
• /
• 2002

Recent demographic changes have increased the heterogeneity of user groups in the housing market. Smaller households(e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible housing systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. This study is a proposal on the design process model for the flexibility of apartment.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.31-35
• /
• 2019

For manufacturing upper housing product of mechanical control valve, the progressive drawing process was conducted experimental. Then, the center of the product was cut to measure the thickness of the product. As a result, the following conclusions were obtained. By means of a stand-alone pad provided with sufficient pressure, it is possible to prevent the occurrence of wrinkles in the die pad product of the drawing process. As a result of the experiment, it was considered that the flange bottom of the product and the lower edge of the product are made thick in thickness, the top edge and the top surface are thin. It is considered that this is due to the size and roughness of the entrance edge radius of the die in the drawing process, and the inflow of the material by the die pad.

• Korean Institute of Interior Design Journal
• /
• v.26 no.3
• /
• pp.71-80
• /
• 2017

Korea is facing various social problems including single elderly household, increase in the number of disabled people and poverty rate and a difference in the proportion of males to females between urban areas and rural areas along with the advent of rapid aging society. Especially, the ratio of poor households in rural areas residing in housing which falls below the minimum housing level and most of them are in the dead zone of housing welfare. In addition, if it is impossible for them to move (relocate) to new housing, the house remodeling is the only measure for improving their housing welfare. However, we don't have enough prior relevant academic and practical experience, and house remodeling requires a series of process including prior planning construction and post-occupancy evaluation, but almost no fundamental research that provides relevant insight has been carried out. Therefore, the purpose of this study is to describe all field situations that occur in the whole customized house remodeling process for disabled female senior citizens living alone in a rural area. The remodeling process was classified into initial planning stage, field verification and adjustment stage and construction stage as the method to participate in the field directly, and any change in the remodeling plan and its causes at each stage were analyzed. As a result, some remodeling items were changed from the main viewpoint of participating parties before the beginning of construction and for reasons such as the deterioration level of housing site, limitation in building equipment and rearrangement of housing, etc., and the remodeling method and its details were developed. It was identified that constant change that occurred in the remodeling process resulted from 1) unique poor characteristics of existing housing and 2) physical condition of residents and their unique lifestyle characteristics that were two aspects required to be emphasized by customized remodeling.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.215-220
• /
• 2004

The purpose of this study is to develope evaluating indicators for housing plan on slope-site. At first, housing plan elements were derived from existing studies, and then, the importance of elements were evaluated by expert group. AHP(Analytic Hierarchy Process) was used to calculate the weight of housing plan elements on slope-site. The results are as follows: 'building layout' is relatively important, and followed important elements are selected as 'pedestrian circulation' and 'parking plan', and then, detail elements for building layout, 'daylight', 'view', 'privacy' and 'using level' are all relatively important.

• Journal of Magnetics
• /
• v.21 no.4
• /
• pp.586-592
• /
• 2016

The magnetic-jack type CRDM withdraws or inserts a control rod assembly from/to the reactor core to control the core reactivity. The CRDM housings form not only the path of the electromagnetic field but also the pressure boundary of a nuclear reactor, and a periodic in-service inspection should be carried out if there are welded or flange jointed parts on the pressure boundary. The in-service inspection is a time-consuming process during the reactor refueling, and moreover it is difficult to perform the inspection over the reactor head. A magnetic motor housing is applied for the current SMART CRDM and has several welding joints, however a nonmagnetic motor housing with fewer or no welding joints may improve the operational efficiency of the nuclear reactor by avoiding or simplifying the in-service inspection process. Prior to the development, the magnetic field transfer efficiency of the nonmagnetic housing was required to be assessed. It was verified and optimized by the electromagnetic analysis of the lifting force estimation. Magnetic flux rings were adopted to improve the efficiency. In this paper, the design and optimization process of a nonmagnetic motor housing with the magnetic flux rings for the SMART CRDM are introduced and the analyses results are discussed.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.411-414
• /
• 2015

The purpose of this study is to conduct a comparative analysis between Korea and the United States of the supply process of unit modular housing at both the factory production phase and the transportation and lifting phase, as part of an attempt to invigorate the unit modular housing market in Korea. Unlike the practice in the United States, one of Korea's unique characteristics is that the floor is constructed with reinforced concrete and hot water heating system. To do this, the wet method in Korea is used that includes concrete placement, curing and constructing hot water floor heating system at the factory production phase, which results in a longer production time and also requires the lifting of heavier loads. In the United States, interior and exterior finishing works of modular housing are performed by different companies, and the distance between the unit module factory and the construction site is quite far. This kind of dualized production structure may cause confusion when it comes to schedule management, procurement management, and stock management. Moreover, problems caused by external environmental factors such as wind and rainfall were reported in the course of long-distance transportation. The results of this case comparison are expected to provide fundamental data that will reduce the amount of trial and error in the unit module production, transportation and lifting work in Korea, which has a comparatively small number of unit modular housing cases.