• Architectural research
• /
• 제9권2호
• /
• pp.37-45
• /
• 2007

The proliferation of the House Dust Mite(HDM) is affected by temperature, humidity, ventilation, etc. Measuring temperature and humidity was performed at the very location where dust samplings take place and where they live in reality together with temperature and humidity of the ambient of the room. There has been discussion over the key environment factor of HDM survival; absolute humidity or relative humidity. It seems that relative humidity is the more important determinant for the mite's survival through the analysis of previous studies. Temperature, humidity, ventilation rate and Der P1 were measured in 4 flats in London. Mite allergen was detected in every house. Levels of Der P1 varied between <100ng/g and 22,778ng/g. Flats with high relative humidity(>50%) and poor ventilation(<0.5ach) showed higher levels of mite allergen than flats with lower humidity and adequate air change rate. Questionnaire survey was conducted and the result helped to confirm the findings from monitoring of environmental factors and the dust sampling.

• Asian Journal for Public Opinion Research
• /
• 제2권1호
• /
• pp.3-7
• /
• 2014

How satisfied or dissatisfied people are with aspects of daily life such as housing, income, health, family, food, human relations, and work provides vital information about them. On the basis of a nation-wide random sample survey in Japan in October 2013, this article analyzes Japanese citizens' daily life satisfaction in a snapshot. The big picture of Japanese daily life is that they are more or less satisfied with their daily life, although income, work, and housing register lower levels of satisfaction in comparison to other aspects like food, family, human relations, and health. Their satisfaction is focused on food, family, and human relations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1109-1112
• /
• 2004

This study reports on the pressure relief design and braided composite of surge arrester. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. As a solution, this study describes pressure relief design performance of arresters with braided composite module. In general, braided composite has Potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was decided. And Polymer arrester module was manufactured with braid. The mechanisms of pressure occurrence and relief were investigated basically by analyzing arc energy and the correlation between thermal shock and indoor pressure in pressure relief test.

• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.117-128
• /
• 2003

The purpose of this study is to investigate the effect of functional ability on relocation among the elderly. Longitudinal data from the Asset and Health Dynamics among the Oldest Old (1993, 1995) were analyzed for 6,225 respondents aged 70 or older. Among functional ability measures, difficulties in advanced activities of daily living (i. e., making telephone calls, taking medications, and managing money), lower body activities (i. e., walking several blocks, climbing one flight of stairs, pulling or pushing large objects, and carrying over 10 pounds), and household activities of daily living (i. e., preparing hot meals and shopping for groceries) were the predictors of increased residential move. Difficulties in basic activities of daily living (i. e., bathing, dressing, getting in and out, and using the toilet) were strongly related to increased entrance into an institutional care facility. Efforts to enhance the independent living of the elderly in the community setting should target the compensation of these functional difficulties.

• 한국주거학회논문집
• /
• 제26권5호
• /
• pp.133-141
• /
• 2015

As an empirical study on Daegu Downtown showing decentralization phenomenon, the purpose of this study is, based on the residential satisfaction research targeting the Downtown residents, to analyze the residential environment satisfaction and residential preference. Considering the parameters of measurement, we used the Ordered Logit Model and Logistic Regression. The results are as follows: First, the comprehensive residential environment satisfaction is relatively lower than that in 2008 and the residential preference in Downtown is similar to that of the past. Second, among the 7 factors that constitute the Downtown residential environment, the house, the landscape, and the security have a relatively large influence on the comprehensive residential environment satisfaction. Third, the residential environment factors which affect those who are hoping continuous Downtown residence are the safety, the house and the complex.

• Environmental Engineering Research
• /
• 제14권2호
• /
• pp.126-133
• /
• 2009

This study investigated the removal characteristics of various micro organic compounds by low-pressure nanofiltration membranes comprised of disinfection by products and pharmaceutically active compounds. The experimental removal of micro organic compounds by low-pressure nanofiltration membranes was compared with the transport model calculations, which consist of diffusion and convection terms including steric hindrance factor. The selected molecule from the disinfection byproducts and pharmaceutical active compounds showed a much lower removal than polysac-charides with a similar molecular size. However,the difference between model calculation and experimental removal of disinfection by-products and pharmaceutically active compounds could be corrected. The correlation of Ks with solute radius was further considered to clarity transport phenomena of micro organic solutes through nanofiltration membranes.

• 한국주거학회논문집
• /
• 제19권1호
• /
• pp.89-96
• /
• 2008

This study measured the thermal environment and residents' control behaviors of cooing according to 3 groups of household type-families with preschool children, families of middle age and families of senior. The object of this study are to fmd the difference of the actual condition of indoor thermal environment and cooling control behavior by age or household type and to develop user oriented climate control system. The results were summarized as follows. When the age of members at household is younger, the indoor mean temperature and temperature that people turned off the air conditioner became lower. These different indoor thermal environment of each group means that younger generation is familiar with cooler from their early age and these early uses of cooler made them prefer cooler condition than family of senior. Therefore, this results show that different indoor thermal environment is influenced by factors such as household type and metabolism difference and so on.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.397-400
• /
• 2009

When the metal sheet is subjected to the housing surface for fitting and insulating from harsh surroundings like fluid ingression or hot steam, both strength and formability have to be equally considered. In this regard, the main aim of this study is to design an apparatus of cost-effectively producing flexible fluted band with increasing the formability of embossed stainless steel sheet, which is utilized as a thermal insulation metal for housing ship engine exhauster. Designed to fabricate a maximum sheet width of 700 mm, this new apparatus consists of upper roll made of hard urethane and the female-etched lower roll made of SKD11, have a producing capacity up to 1-meter homogeneously embossed sheet for just 60 seconds. This machine is devised for the maximum operating efficiency from original sheet handling to machine setting. The embossing properties are characterized by 3-D profiling. After embossing plain metal sheet, both yield strength and elongation properties are improved simultaneously, indicating the effectiveness of the newly designed apparatus.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.51-61
• /
• 2006

Failure analyses were conducted on a crank shaft and a chock liner by using X-ray diffraction, optical microscopy and SEM/EDS techniques. In the crank shaft, a crack developed where a maximum tensile stress coincided with band structure formed by hot forging. The maximum tensile stress was observed to originate from volume expansion during high frequency induction heat treatment and the band structure to develop between upper and lower dies during hot forging. In the chock liner, the wear mechanism varied with the chemical affinity and hardness of liner material relative to friction pair of housing liner. Brass of low chemical affinity and hardness compared to housing liner showed uniform adhesive wear. STS 304 and STS 420J2 of high chemical affinity showed galling and scoring respectively.

• 대한가정학회지
• /
• 제34권3호
• /
• pp.327-343
• /
• 1996

This study is the last part of a collaborative study on the Family Life Issues of Middle aged Apartment-Residents in Seoul. This study is focused on case studies. The data were collected from 15 fulltime housewives who are in the upper-middle and the lower-middle families having at least one child in a middle or high school from Kangbuk and Kangnam areas. In this study, the whole family life issues were divided into the following 4 subareas ; 1. housewives' own life, 2. family life, 3. economic environments, 4. housing environments. The major result of this study is : the most important factor influencing the quality of life of the middle age family was the existence of children attending junior and senior high school, which brought various problems into the family with relation to self identity, time management and leisure of middle aged housewife, educational cost, shared family activities, housing space. Therefore the whole family life would be improved through the change of the current education system.