• 자원환경지질
• /
• 제19권3호
• /
• pp.225-230
• /
• 1986

Various interpretations on the boundary between the $Okch{\check{o}}n$ system and the Great Limestone series of the $Chos{\check{o}}n$ system, and on the geologic structure and stratigraphy of the $Okch{\check{o}}n$ system have been yielded by the previous studies, and they are still in hot debate. The present work has mainly studied on the boundary between the $Okch{\check{o}}n$ and $Chos{\check{o}}n$ systems in the south of $Jech{\check{o}}n$, and the geology in its vicinity to clarify the previous misinterpretations if any on the geologic structure and in trun stratigraphy of the area concerned. The boundary between the $Okch{\check{o}}n$ system and the Great Limestone series of the $Chos{\check{o}}n$ system has been thought to be (1) gradational relation which means two systems are the same formation, (2) unconformable relation in which the $Okch{\check{o}}n$ system overlies the $Chos{\check{o}}n$ system, (3) unconformable relation in which the $Chos{\check{o}}n$ system overlies the Okchon system indicating that the age of the $Okch{\check{o}}n$ system is Precambrian, and (4) fault contact in which the $Okch{\check{o}}n$ system of Precambrian age comes in contact with the $Chos{\check{o}}n$ system of Cambro-Ordovician age. The present study clearly found that the relationship between the two systems is a fault zone contact. Shear zone of a width of 300 to 400m is developed, and andesitic volcanics and basic dikes are intruded along the fault zone. This fault contact is exactly the north extension of the Bonghwajae fault, which was denominated long time ago by two of the present authors. The eastern side of the fault has been uplifted so that the $S{\check{o}}changri$ formation of the $Okch{\check{o}}n$ system cropped out in the zone of the Great Limestone series. All the previous workers thought that the $S{\check{o}}changri$ formation rests on the Great Limestone series, but the present study found an overthrust having a strike of $N8^{\circ}E$ and dip of $30^{\circ}NW$ between them, and the $S{\check{o}}changri$ formation has thrusted over the Great Limestone series at the central part of the study area. In the southern and northern parts of this uplifted $S{\check{o}}changri$ formation, the Great Limestone series rests unconformably on it. In the eastern part of the study area where the Mt. Dangdu is located and the previous workers thought that the $S{\check{o}}changri$ formation rests on the Great Limestone series, Precambrian basement rock whose age is older than 1720+50 m.y. crops out in the northern part of the east-west trending high angle fault, and the Great Limestone series rests unconformably on the basement.

• 항공우주정책ㆍ법학회지
• /
• 제32권1호
• /
• pp.201-224
• /
• 2017

이 논문은 공해상 군용기(또는 군용항공기)의 법적 지위에 관한 것으로 군용기의 법적 지위, 상공비행의 자유, 추적권, 임검권, 방공식별구역(ADIZ) 등을 다루었다. 1982년 UN해양법협약 제86조에 의하면 공해는 영해와 내수는 물론이고 접속수역, 배타적 경제수역이 아닌 수역을 의미하므로 기존의 공해였던 부분이 상당히 연안국관할권 하에 놓이게 되었다. 이와 같은 공해의 상공비행과 관련된 군용기의 법적 지위에 관한 사항으로 다음과 같은 결론을 얻을 수 있다. 첫째, 1944년 시카고 협약은 군용기의 법적 지위를 명시하고 있지 않은데 제3조(a)에서 본 협약이 민간항공기에만 적용되고 국가항공기에는 적용되지 않는다고 명시하고, 제3조 (b)에서 군용기, 세관용 항공기, 경찰용 항공기 등이 국가기관에 소속된 국가항공기로 간주된다고만 명시되어 있다. 따라서 현재 군용기의 법적 지위는 1919년 파리협약 제32조에 명시되었던 면책특권과 국제관습법에 의존하는 수밖에 없다. 한편 UN해양법협약 제95조는 공해상 군함의 면제권에 관하여 공해에 있는 군함은 기국외의 어떠한 국가의 관할권으로부터도 완전히 면제된다고 규정하고 있는데, 군용기의 경우도 군함에 준하는 면책권을 향유한다고 해석할 수 있다. 둘째, UN해양법협약 제111조는 추적권에 관하여 규정하고 있는데 이러한 추적권은 군함이나 군용기 또는 기타 정부역무에 종사함이 명백히 표시되고 식별되며 이에 대한 권한이 부여된 선박이나 항공기에 의해서만 행사되어질 수 있음을 명시하고 있으므로 선박 뿐 아니라 군용기에 의해서도 추적권이 행사될 수 있음을 규정하고 있다. 그러나 외국항공기에 대한 연안국의 공해상공의 추적권(right of aerial hot pursuit)이 국가관행이나 법적 확신(opinio juris)에 의해서 국제관습법 상 존재하는지는 확실하지 않다. 공해상공의 추적권 사례가 매우 적으므로 영공 이원의 외국항공기에 대한 이 권리가 국제관습법을 증명하는 '법으로 인정된 일반관행(general practice accepted as law)으로 존재한다고 할 수는 없다. 셋째, UN해양법협약 제110조는 임검권(right of approach)에 관하여 설명하고 있는데, 외국선박을 공해에서 만난 군함은 일정 혐의를 가지고 있다는 합리적 근거가 있는 한 그 선박을 임검하는 것은 정당화되는데, 이 규정은 정부 업무에 사용 중인 것으로 명백히 표시되어 식별이 가능하며 정당하게 권한이 부여된 모든 선박이나 항공기에도 적용된다. 따라서 이러한 규정은 군용기에도 준용된다고 할 수 있다. 넷째, 방공식별구역(ADIZ)은 자국 영공을 방위하기 위해 영공 외곽 배타적 경제수역(EEZ) 또는 공해 상공에 설정하는 공중 구역으로 국제법상 '자위권'(또는 정당방위, self defense)에 근거하여 일방적으로 선포되므로, 엄밀히 말하면 ADIZ를 설치할 규범도, 이를 금지할 수 있는 규범도 없고, 이를 규제하는 국제기구도 없다고 할 수 있다. 그러나 ADIZ가 영공의 확장으로 해석되지는 않는다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.423-426
• /
• 2011

The excessive axial load occurred in an immovable zone of continuous welded rail(CWR) tracks threatens the security of running trains due to the track buckling in extreme hot summer. The influence factors, such as rail temperature for compressive stress, ballast resistance for track stiffness and initial imperfection of track for tracks irregularity are uncertain track parameters that are randomly varied by climate conditions, operating conditions and maintenance of track etc. So, buckling of CWR tracks has very high uncertainties. Therefore, applying the probabilistic approach method is essential in order to rationally consider the uncertainty and randomness of the various parameters. In this study, buckling sensitivity analysis was carried out with respect to the characteristics of probability distribution of lateral ballast resistance using the buckling probability evaluation system of CWR tracks developed by our research team.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.372-373
• /
• 2009

In this work, the effects of substrate on the formation of YBaCuO by CVD were investigated by observing the microstructure and the crystallographic orientation and by measuring the temperature dependence of electrical resistance. Source materials used to synthesize the YBaCuO superconducting film were beta-diketone chelates of Y, Ba and Cu. These chelates were evaporated at $137-264^{\circ}C$. The source vapors of Y, Ba and Cu were transported into hot zone by using Ar gas and $O_2$ gas was introduced separately.

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.56-63
• /
• 2001

A slitter is a sort of machinery to cut sheet materials in rolls continuously in the longitudinal direction. Recently slitter line users have requiring higher quality and precision in products in addition to high productivity. A finite element analysis has been performed to investigate the effect of processing factors on shear planes in the slitting of Shrinkage Band(S,K.B.). For the analysis, Hot-dip 55% aluminum-zinc alloy-coated steel sheets and coils(SAZCC) is selected as a material. The results obtained are that deformation was concentrated along the very narrow zone and the maximum slitting load decreases by increasing the knife clearance. Also effective strain decreases according to the clearance increases.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.511-515
• /
• 2000

The purpose of this experiment is to prepare ethylene propylene diene terpolymer(EPDM)/ acrylonitrile butadiene rubber(NBR) blend which represents good environmental resistant properties including favorable oil and ozone resistance. With incorporation of EPDM, NBR and other ingredients, the rubber and chemical additives were mixed by mechanical method such as Banbury mixer and open 2-roll mill. Then rubber vulcanizates were manufactured by hot press and mechanical properties, oil and ozone resistance of the test specimens were measured. The oil resistance and ozone resistance of EPDM and NBR, respectively, is remarkably improved by blending EPDM with NBR. The optimum results of oil and zone resistant characteristics were obtained at EPDM/NBR(=25/75 wt%) composition ratio.

• 설비공학논문집
• /
• 제10권4호
• /
• pp.381-388
• /
• 1998

Hot and humid weather in summer generally brings about discomfort. Experiments on which relative humidity makes effects on the comfort sensation were performed to the young and the aged using sensation vote. From July to October 1996, seven college students and eleven aged people were exposed for 2 hours under six different conditions in the Pukyong National University test chamber so as to determine the effects of relative humidity on thermal and comfort sensations. Subjects were wearing same clothes, and the mean clo value was 0.5. The mean radiant temperature was equal to the air temperature and air velocity in the occupied zone around 0.lm/s. In the experiments, it was found that discomfort could be largely reduced when the humidity is controlled to low values in the settled high temperature.

• 한국환경과학회지
• /
• 제11권6호
• /
• pp.543-551
• /
• 2002

A Numerical simulation on the thermal flow performance was carried out to propose the incinerator type for the domestic refuses and to investigate the design factor and operating conditions. The SSTI(Standard Stoker Type Incinerator) proposed in this study was modified from the type with central f)ow. It has the characteristics of good mixing between refuse and hot combustion gas in primary combustion chamber and between unburned gas inflowing and secondary air jet in secondary chamber. By predictive results, the SSTI was no recirculation zone in secondary chamber so that mixing time was increased with high residence time. It has good characteristics of combustion and low emission. Parametric screening studies have been understood with phenomenon of combustion in incinerator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1369-1375
• /
• 2004

For many years and primarily for economical reasons, Dissimilar Metal Welds have been used as transition joints in a variety of equipment and applications. But Dissimilar Metal Welds have several fabrication and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Laser welding techniques have been characterised for various materials. In this paper, the laser weldability of STS304 stainless steel and SM45C at dissimilar metal welds using a continuous wave Nd：YAG laser are experimentally investigated. An experimental study was conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser were tested

• 한국연소학회지
• /
• 제6권2호
• /
• pp.29-35
• /
• 2001

Unsteady numerical study has been conducted on combustion dynamics of a lean-premixed swirl-stabilized gas turbine swirl injector. A three-dimensional computation method utilizing the message passing interface (MPI) parallel architecture, large eddy simulation(LES), and proper orthogonal decomposition (POD) technique was applied. The unsteady turbulent flame dynamics are simulated so that the turbulent flame structure can be characterized in detail. It was observed that some fuel lumps escape from the primary combustion zone, and move downstream and consequently produce hot spots. Those flame dynamics coincides with experimental data. In addition, basis modes of the unsteady turbulent flame are characterized using proper orthogonal decomposition (POD) analysis. The flame structure based on odd basis modes is apparently larger than that of even ones. The flame structure can be extracted from the summation of the basis modes and eigenvectors at any moment.