• 동력기계공학회지
• /
• 제5권1호
• /
• pp.21-26
• /
• 2001

This paper represents the turbulent intensity, the turbulent kinetic energy and Reynolds shear stress in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. The experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The turbulent intensity and the turbulent kinetic energy show that the maximum value is formed in the narrow slits distributed radially on the edge of a cone type swirl burner, hence, the combustion reaction is anticipated to occur actively near this region. And the turbulent intensities ${\upsilon}\;and\;{\omega}$ are disappeared faster than the turbulent intensity u due to the inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the Reynolds shear stress $u{\upsilon}$ is distributed about three times as large as the Reynolds shear stress $u{\omega}$ in the outer region of the cone type gas burner.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.25-31
• /
• 2000

This paper represents the vector fields and three dimensional mean velocities in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. This experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component is focused in the narrow slits distributed radially on the edge of a cone type swirl burner, for that reason, there is some entrainment of ambient air in the outer region of the burner and the rotational flow can be shown in the inner region of the burner because mean velocity W is distributed about twice as large as mean velocity V due to inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the mean velocities are largely distributed near the outer region of burner within $X/R{\fallingdotseq}1.5$, hence, the turbulent characteristics are anticipated to be distributed largely in the center of this region due to the large inclination of mean velocity and swirl effect.

• 동력기계공학회지
• /
• 제6권4호
• /
• pp.23-29
• /
• 2002

This paper is studied to investigate the effect of slits and swirl vanes on the main flow fields of a gun-type gas burner through X-Y plane and Y-Z plane respectively by using X-probe from hot-wire anemometer system. This experiment was carried out with flow rate $450{\ell}/min$ in respective burner models installed in the test section of a subsonic wind tunnel. The burner models with only slits and only swirl vanes respectively were made by modifying original gun-type gas burner. The fast jet flow spurted from slits played a role such as an air-curtain because it encircled rotational flow by swirl vanes and drives mixed main flow to axial direction. As a result, the gun-type gas burner had a wider flow range up to about Y/R=1.5 deviated from slits and maintains a comparatively large velocity in the central part of burner within the range of about X/R=2.5. Therefore, it was very desirable that swirl vanes were installed within slits in gun-type gas burner in order to control the main flow fields effectively.

• 오토저널
• /
• 제7권1호
• /
• pp.12-17
• /
• 1985

주위기체와 다른 기체를 간헐적으로 또는 단발로 분사한 경우, 분류내의 분사체의 농도는 시간에 따라 급격히 변화한다. 수ms인 전자식기체 채취밸브를 이용해서 기체를 채취하고, 가스마토그 라프 등에 의해 가스분석을 행하는 방법이 있고 주로 피스톤식 내연기관의 연소실내 농도의 측 정에 이용되고 있다. 이 방법은 밸브 열립시간을 단축시켜도 약 1ms가 한도이고 시간분해능력도 1ms정도가 최단시간이다. 또 동일한 장소에서 농도의 시간경과를 얻는 데에는 각각의 시간에 대해서 기체의 채취와 분석을 행하지 않으면 안되어 실제시간의 농도측정이 불가능하다는 결점이 있다. 최근 레이저 응용기술의 진보에 의해 라만산란, 레리산란, CARS법 등의 농도순간측정이 가능해지고 있고, 점차 현실화되어가고 있다. 이들의 방법은 국소의 순간농도뿐만 아니라 온도의 동시측정도 가능하게 하는 특징을 갖고있다. 그러나 레이저에 의한 측정장치는 현시정에서는 아직 가격이 고가이고 광학계의 설치 등, 실험상의 조작이 복잡한 것 등의 결점을 갖고 있다. 본 고에서는 최근 진전이 현저하고 실용화에 대한 확신을 갖고 있는 열선농도Probe에 의한 순간농 도의 측정방법을 소개하고자 한다.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2454-2462
• /
• 1994

The effects of thermal stratification on the flow of a stratified fluid past a heated circular cylinder were examined in a wind tunnel. Turbulent intensities, rms values of temperature and turbulent convective heat flux distributions in the heated cylinder wake with and without thermal stratification were measured by using a hot-wire and cold-wire combination probe. A phase averaging method was also used to estimated coherent motion in the near wake. It is found that the vertical turbulent motion in the stably stratified flow case dissipates faster than that of the neutral case, i.e., vertical growth of vortical structure is suppressed under the strongly stratified condition. The coherent motion of temperature makes a large contribution like velocity coherent motion. However, the coherent motions of temperature fluctuation become very different with the change of experimental conditions, though the velocity coherent motions are quite similar in all experimental conditions.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.187-190
• /
• 2006

In the present study, effects of tree-stream turbulence and surface trip wire on the flow past a sphere at $Re\;=\;0.4\;{\times}\;10^5\;{\sim}\;2.8\;{\times}\;10^5$ are investigated through wind tunnel experiments. Various types of grids are installed upstream of the sphere in order to change the tree-stream turbulence intensity. In the case of surface trip wire, 0.5mm and 2mm trip wires are attached from $20^{\circ}\;{\sim}\;90^{\circ}$ at $10^{\circ}$ interval along the streamwise direction. To investigate the flow around a sphere, drag measurement using a load cell, surface-pressure measurement, surface visualization using oil-flow pattern and near-wall velocity measurement using an I-type hot-wire probe are conducted. In the variation of free-stream turbulence, the critical Reynolds number decreases and drag crisis occurs earlier with increasing turbulence intensity. With increasing Reynolds number, the laminar separation point moves downstream, but the reattachment point after laminar separation and the main separation point are fixed, resulting in constant drag coefficient at each free-stream turbulence intensity. At the supercritical regime, as Reynolds number is further increased, the separation bubble is regressed but the reattachment and the main separation points are fixed. In the case of surface trip wire directly disturbing the boundary layer flow, the critical Reynolds number decreases further with trip wire located more downstream. However, the drag coefficient after drag crisis remains constant irrespective of the trip location.

• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.1-11
• /
• 2004

평판의 근접 후류에서 상류 경계층의 영향을 조사하기 위한 실험적 연구가 수행되었다. 트리핑 와이어(tripping wire)의 여러 부착 위치가 경계층의 유동조건을 유발시키기 위하여 선택되었다. 평판 앞전에서부터 0.98C 위치에서의 층류, 천이, 난류경계층이 대칭, 비대칭 후류의 발달과정을 조사하기 위하여 부과되었다. X형태의 열선 프로브(55P61)를 이용한 측정은 근접 후류의 8위치에서 수행되었고, 측정된 평균속도분포는 기존의 후류 상사변수로 무차원화 되어 제시되었다. 대칭 후류는 후류의 중앙부분에서 기존의 상사곡선과 일치하지만, 비대칭 후류는 측정된 범위에서 기존의 상사 곡선과 일치하지 않았다.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1300-1307
• /
• 1995

The effect of thermal stratification on the turbulent dispersion from a fine cylindrical heat source was experimentally examined in a wind tunnel with and without a strong temperature gradient. A 0.5 mm dia. nichrome wire was used as a line heat source. Turbulent intensities, r.m.s. value of temperature and convective heat fluxes were measured by using a hot-wire and cold-wire combination probe. The results show that the peack value and the spread of the vertical turbulent intensity for the stratified case are far lower than those in the neutral case, which indicates that the stable temperature gradient suppresses the vertical velocity component. All of the third order moments including heat fluxes measured in the stable condition have very small values than those of the neutral case. This nature suggests that the decrease of scalar fluctuations in the stably stratified flow is mainly due to the suppression ofthe turbulent diffusion processes by the stable stratification. A simple gradient model with a composite timescale which has a simple weighted algebraic mean between dynamic and thermal time scale yields reasonably good numerical values in comparison with the experimental data.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.991-997
• /
• 2014

이 연구는 Gun식 가스버너의 스월유동장을 연소실과 화염이 없는 상태에서 직선형 5공압력프로브의 측정을 통해 고찰하였다. 직선형 5공압력프로브에 의한 속도 및 정압성분들은 넌널링 교정방법에 의해 연산하였으며, X형 열선프로브와 전산유체역학의 해석에 의한 결과들과 비교하였다. 결과적으로 Gun식 가스버너의 중심부에서 스월유동장에 대해 5공압력프로브에 의한 속도 및 정압의 측정값들은 비교적 X형 열선프로브에 의한 경우보다는 좋은 성능을 보였으나 전산유체역학의 해석에 의한 경우보다는 다소 미흡한 결과를 보였다.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1210-1218
• /
• 2004

Experimental study was performed to investigate the flow behavior in boundary layer on the blade suction surface of a multi-stage axial flow compressor, which was focused on the third stage of the 4-stage Low Speed Research Compressor. Flow measurements in the boundary layer were obtained using a boundary layer hot wire probe, which was traversed normal to the blade suction surface at small increments by the probe traverse specially designed. Detailed boundary layer flow measurements covering most of the stator suction surface were taken and are described using time mean and ensemble averaged velocity profiles. Amplitude of the velocity fluctuation and turbulence intensity in the boundary layer flow are also discussed. At midspan, narrow but strong wake zone due to passing wake disturbances is generated in the boundary layer near the blade leading edge for the rotor blade passing period. Corner separation is observed at the tip region near the trailing edge, which causes to increase steeply the boundary layer thickness.