• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2534-2546
• /
• 2023

Gas-cooled space reactor, which adopts He-Xe gas mixture as working fluid, is a better choice for megawatt power generation. In this paper, thermal-hydraulic characteristics of He-Xe gas mixture in 2×2 rod bundle wrapped with helical wires is numerically investigated. The velocity, pressure and temperature distribution of the coolant are obtained and analyzed. The results show that the existence of helical wires forms the vortexes and changes the velocity and temperature distribution. Hot spots are found at the contact corners between helical wires and fuel rods. The highest temperature of the hot spots reach 1600K, while the mainstream temperature is less than 400K. The helical wire structure increases the friction pressure drop by 20%-50%. The effect extent varies with the pitch and the number of helical wires. The helical wire structure leads to the reduction of Nusselt number. Comparing thermal-hydraulic performance ratios (THPR) of different structures, the THPR values are all less than 1. It means that gas-cooled space reactor adopting helical wires could not strengthen the core heat removal performance. This work provides the thermal-hydraulic design basis for He-Xe gas cooled space nuclear reactor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.263-267
• /
• 2011

This paper presents a numerical investigation of the deflagration to detonation transition (DDT) of flame acceleration by a shock wave filled with an ethylene-air mixture in bent tube. A model consisting of the reactive compressible Navier-Stokes equations and the ghost fluid method (GFM) for complex boundary treatment is used. A various intensities of incident shock wave simulations show the generation of hot spots by shock-flame interaction and the accelerated flame propagation due to geometrical effect. Also the first detonation occurs nearly constant chemical heat release rate, 20 MJ/($g{\cdot}s$). Through our simulation's results, we concentrate the complex confinement effects in generating strong shock wave, shock-flame interaction, hot spot and DDT in pipe.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.483-488
• /
• 2003

Frictional heating in brakes causes thermoelastic distortion of the contacting bodies and hence affects the contact pressure distribution. The resulting thermo-mechanical coupling can cause thermoelastic instability (TEI) if the sliding speed is sufficiently high, leading to non-uniform heating called hot spots and low frequency vibration known as hot judder. The vibration of brakes to the known phenomenon of frictionally-excited thermoelastic instability is estimated studying the interface temperature and pressure evolution with time. A simple model has been considered where a layer with half-thickness ${\alpha}$ slides with speed V between two half-planes which are rigid and non-conducting. The advantage of this properly simple model permits us to deduce analytically the critical conditions for the onset of instability, which is the relation between the critical speed and the growth rate of the interface temperature and pressure. Symmetrical component of pressure and temperature distribution at the layer interfaces can be more unstable than antisymmetrical component. As the thickness ${\alpha}$ reduces, the system becomes more apt to thermoelastic instability. Moreover, the evolution of the system beyond the critical conditions has shown that even if low frequency perturbations are associated with low critical speed, it might be less critical than high frequency perturbations if the working sliding speed is much larger than the actual critical speed of the system.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.247-253
• /
• 2010

The characteristics of selective oxidation prior to hot-dip galvanizing with the annealing atmosphere dew point and chemical composition in dual-phase steels and their effect on the inhibition layer formation relevant to coating adhesion have been studied using a combination of electron microscopic and surface analytical techniques. The annealed and also galvanized samples of 3 kinds of Si/Mn ratios with varied amounts of Si addition were prepared by galvanizing simulator. The dew point was controlled at soaking temperature $800^{\circ}C$ in 15%$H_2$ -85%$N_2$ atmosphere. It was shown that good adhesion factors were mainly uniformity of oxide particle distribution of low number density and low Si/Mn ratio prior to hot-dip galvanizing. Their effect was the greatly reduced coating bare spots and the formation of uniform inhibition layer leading to good adhesion of Zn overlay. The mechanism of good adhesion is suggested by two processes: the formation of inhibition layer on the oxide free surface uncovered with no $SiO_2$-containing particles in particular, and the inhibition layer bridging of oxide particles. The growth of inhibition layer was enhanced markedly by the delayed reaction of Fe and Al with the increase of Si/Mn ratio.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.114-121
• /
• 2004

Frictional heating in brakes causes thermoelastic distortion of the contacting bodies and hence affects the contact pressure distribution. The resulting thermo-mechanical coupling can cause thermoelastic instability (TEI) if the sliding speed is sufficiently high, leading to non-uniform heating called hot spots and low frequency vibration known as hot judder. The vibration of brakes to the known phenomenon of frictionally-excited thermoelastic instability is estimated studying the interface temperature and pressure evolution with time. A simple model has been considered where a layer with half-thickness$\alpha$slides with speed V between two half-planes which are rigid and non-conducting. The advantage of this properlysimple model permits us to deduce analytically the critical conditions for the onset of instability, which is the relation between the critical speed and the growth rate of the interface temperature and pressure. Symmetrical component of pressure and temperature distribution at the layer interfaces can be more unstable than antisymmetrical component. As the thickness $\alpha$ reduces, the system becomes more apt to thermoelastic instability. For perturbations with wave number smaller than the critical$m_{cr}$ the temperature increases with m vice versa for perturbations with wave number larges than $m_{cr}$ , the temperature decreases with m.

• Journal of the Korean association of regional geographers
• /
• v.4 no.2
• /
• pp.165-182
• /
• 1998

When tour site is being used by people for the destination of tour, it has a life, or it will lose its life as a tour site. Therefore this paper aims to, based on Butler's theory, has chosen 46 hot spring spots in Korea which are legally assigned and presently running, and tried to analyze the life cycles, the stage of dispositional characteristics, and visitors' favoritism, and to try to find activating method which is not decline. Out of 46 spots, 29 Places were found on the stage of development, which took high percentage, 4 were on the growing stage, 5 were on the mature stage, 5 were on the stagnation or decline stage and the rest 3 were on the stage of rejuvenation. Geographically, Korean hot springs were located on the plain or mountainous areas mostly, and less of them were on hills and coast lines. In water quality, most of places had simple water while the places with salt and sulfur contained water were marked low rate. The temperatures of hot spring water were variable between $25^{\circ}C{\sim}78^{\circ}C$, but the older hot springs were hotter than new ones. After observing the relationship between disposition characteristics and life cycles, the geographical locations and the matter of approach were found as majour influential factors to the life cycles of them. The type of mountainous areas were observed slow progress in life cycle, due to traffic problem, until the road expansion or pavement work were done. Meanwhile, the suburban ones adjacent to big cities were favored by hot spring tourists due to their easy approach and easy traffic. The new born hot springs with such conditions have shown the fast growth. As studied above, since the hot springs were supposed to be for recuperation and vacational, a hot spring with better recreational and accommodational facilities was more favored by tourists than the one with pretty interior decorations. It was because the tour purpose of people has been switched from single purpose to multi one. Thus, the suggestion for activating a declining hot spring and bringing people in them is to develop new and attractive tour resources, expanding the related area, maintaining good quality of water, developing a complex site for long-term tour, developed traffic routs, hot spring festivals, utilizing adjacent tour resources, preparing public water supply system, and assigning as special tour zone.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.40-53
• /
• 2013

Most of the existing domestic studies to identify the distribution of longevity population and influencing factors oriented confirmatory approach. Furthermore, most of the studies in this research topic simply have used their own definition of spatial unit of analysis or employed arbitrary spatial units of analysis according to data availability. These research approaches can not sufficiently reflect the spatial characteristic of longevity phenomenon and exposed to the Modifiable Aerial Unit Problem(MAUP). This research performed the Exploratory Spatial Data Analysis(ESDA) to identify the spatial autocorrelation of the distribution of longevity population and investigated whether the modifiable areal unit problem in the aspect of scale effect using spatial population data in Korea. We used Si_Gun_Gu and Eup_Myeon_Dong as two different spatial units of regional longevity indicators measured. Then, we applied Getis-Ord Gi* to investigate the existence of spatial hot spots and cold spots. The results from our analysis show that there exist statistically significant spatial autocorrelation and spatial hot spots and cold spots of regional longevity at both Si_Gun_Gu and Eup_Myeon_Dong levels. This result implies that the modifiable areal unit problem does exist in the studies of spatial patterns of longevity population distribution. The demand for longevity researches would be increased inevitably. In addition, there were apparent differences for the global spatial autocorrelation and local spatial cluster which calculated different spatial units such as Si_Gun_Gu and Eup_Myeon_Dong and this can be seen as scale effect of MAUP. The findings from our analysis show that any study in this topic can mislead results when the modifiable areal unit problem and spatial autocorrelation are not explicitly considered.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2002

Black hole binary candidates are known to be composed of a black hole with 10 $M_{\odot}$ and a K or M type companion. Because the companion is believed to fill the Roche lobe that is very aspherical, the light curves of black hole binaries are characterized by an ellipsoidal variation. It has been known that the ellipsoidal light curves exhibit asymmetric maximum brightness at the orbital phases 0.25 and 0.75, which has been attributed to star spots or the hot impact points of the accretion flow on to the accretion disk around the black hole. In this paper, it is pointed out that the special relativistic beaming effect contributes to the asymmetry of several percent often observed in the light curves. The typical orbital velocity 400 km $s^{-1}$ observed in black hole binaries may induce the temperature difference $\DeltaT/T$ ~ 1/400 of the late type companion star in the observer`s rest frame, because of the special relativistic Doppler beaming effect. This difference in temperature can result in several per cent of brightness sensitively dependent on the wavelength band, which is comparable to what has been observed in most black hole binary candidates. Considering the significant contribution of the special relativistic Doppler beaming effect, we conclude that the estimation of the sizes and temperatures of the star spots or the hot impact point needs serious revision.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.2
• /
• pp.123-132
• /
• 2003

We performed CCD photometric observations of the W-type contact binary AB And for 10 nights from November 1995 to December 1999 using the 61-cm reflector and BVR filters at Sobaeksan Optical Astronomy Observatory. From our observations, the seasonal light curves of AB And for 1995, 1996 and 1999 were completed and 8 new times of minimum light were determined. Newly obtained light curves show that strong light variations occurred in AB And during the past five years. We adopted the 1996 light curves as reference ones and obtained the photometric solutions of them with contact mode in the Wilson-Devinney binary code. Assuming such light variations were produced by the existence of a star spot (or star spots) in the analysis, we derived the system parameters and analyzed the 1995 and 1999 light curves by adjusting only the spot parameters. As the results, we interpreted that those light variations are produced by the simultaneous existence of a hot spot and a cool spot on the secondary. We could infer that the hot spot on the secondary is produced due to mass exchange between the components suggested by Lee (1999).

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.11
• /
• pp.4935-4937
• /
• 2016

Objective: To compare dosimetric parameters of 3 dimensional conformal radiotherapy (3 DCRT) and intensity modulated radiotherapy (IMRT) in terms of target coverage and doses to organs at risk (OAR) in the management of rectal carcinoma. Methods: In this prospective study, conducted between August 2014 and March 2016, all patients underwent CT simulation along with a bladder protocol and target contouring according to the Radiation Therapy Oncology Group (RTOG) guidelines. Two plans were made for each patient (3 DCRT and IMRT) for comparison of target coverage and OAR. Result: A total of 43 patients were recruited into this study. While there were no significant differences in mean Planning Target Volume (PTV) D95% and mean PTV D98% between 3 DCRT and IMRT, mean PTV D2% and mean PTV D50% were significantly higher in 3 DCRT plans. Compared to IMRT, 3 DCRT resulted in significantly higher volumes of hot spots, lower volumes of cold spots, and higher doses to the entire OAR. Conclusion: This study demonstrated that IMRT achieves superior normal tissue avoidance (bladder and bowel) compared to 3 DCRT, with comparable target dose coverage.