• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.740-750
• /
• 2003

It has been observed that the cooling capacity of an impinging water jet is affected by the seasonal conditions in large-scale steel manufacturing processes. To confirm this phenomenon, cooling experiments utilizing a hot steel plate cooled by a laminar jet were conducted for two initial ambient air temperatures (10$^{\circ}C$ and 40$^{\circ}C$) in a closed chamber, performing an inverse heat conduction method for quantitative comparison. This study reveals that the cooling capacity at an air temperature of 10$^{\circ}C$ is lower than the heat extracted at 40$^{\circ}C$. The amount of total extracted heat at 10$^{\circ}C$ is 15% less than at 40$^{\circ}C$ , These results Indicate the quantity of water vapor, absorbed until saturation, affects the mechanism of boiling heat transfer.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.508-519
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.35-36
• /
• 2010

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.06a
• /
• pp.92-92
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.473-474
• /
• 2011

• Proceedings of the Korean Nutrition Society Conference
• /
• 2001.05a
• /
• pp.195.2-195
• /
• 2001

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1573-1579
• /
• 2004

This study was conducted to develop intermediate material for new processed food from sweet pumpkin. Osmotic dehydration was carried out as pretreatment before drying. After the sweet pumpkins were pretreated under optimized osmotic dehydration conditions, they were dried by three drying methods (hot air drying, vacuum drying and cold air drying). The moisture contents of dried sweet pumpkin products by osmosis treatment (sucrose) and hot air drying, vacuum drying, and cold air drying were 14.48, 14.09 and 13.87%, respectively. Cold air drying preserved more vitamin C content and showed lower color difference than hot air drying and vacuum drying. As a result of microscopic analysis, cold air dried sweet pumpkin was observed regular tissue, while hot air and vacuum dried sweet pumpkins were observed a cell collapse following the loss of water.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.731-736
• /
• 2013

To improve their shelf-life, domestic peaches were treated with hot air($46^{\circ}C$) for 0~9 hour, and the spoilage rate, changes of physico-chemical and sensory properties were investigated. The control showed spoilage at day 4, and then 50% of control showed spoilage on day 6. However, 12.5% of samples treated with hot air($46^{\circ}C$) for 6 hr showed spoilage on day 4. After 6 days, the spoilage rates of peaches treated with hot air treated for 3~9 hr were 16.7, 25.0, and 25.0%, respectively. Weight change of control was higher than that of hot air-treated samples for 6 days storage. There were no differences in pH of samples among the treatments, but pH increased with storage time. Hardness of hot air-treated samples was higher than that of control in the initial stage of storage. And then hardness of control sample was decreased faster than that of the hot air-treated samples for 6 days of storage. No significant changes in lightness and redness of the samples were observed after hot air treatment. Changes in yellowness of control occurred faster than that of hot air-treated samples during storage. The sensory parameters including taste, flavor, color, texture and overall acceptance at initial period were not different among treatments. The scores for taste, flavor, texture and overall acceptance of control decreased faster than those of hot airtreated samples during storage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.92-101
• /
• 1996

In a gasoline engine, the characteristics of air flow is very important not only for the design of the intake system geometry bout also for the accurate measurement of the induction air mass. In this study, an air flow rate measurement of the induction air mass. In this study, an air flow rate measurement was conducted by using the hot wire flow meter at the upstream of the intake port and the throttle. At the upstream of the throttle, the overshoot phenomena of the air flow rate by fast throttle opening were analyzed with choked flow. At the upstream of the intake port, the cylinder variation of the air flow rate and the difference between fast throttle opening and closing were showed during the unsteady state by the throttle step change. The results of this study can be used for the design of the throttle valve geometry and cylinder by cylinder control.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.609-617
• /
• 2017

This experiment was carried out to enhance the availability of blackberry. Since it is difficult to use blackberry as a fresh fruit, we investigated the quality characteristics of blackberry powder obtained by various drying methods (freeze drying and hot-air drying at $40{\sim}80^{\circ}C$). The L- and b-values of freeze-dried powder was higher than hot-air dried powder. The pH (3.2) was lowest and the acidity (14.4%) was highest in freeze-dried powder. In freeze drying, the brix degree was $65.7^{\circ}Bx$, but it increased from $54.7^{\circ}Bx$ to $68.5^{\circ}Bx$ with increasing temperature during hot air drying. The total polyphenol and flavonoids contents were the highest in freeze-dried powder, at 9.3 and 6.2 mg/g, respectively. The levels increased as temperature increased in hot air drying. Anthocyanin content in freeze-dried powder was 8.51 mg/g, while it sharply decreased to 1.17~2.45 mg/g in hot-air drying. Vitamin C content in freeze drying ($979.4{\mu}g/g$) was higher than that in hot-air drying ($48.3{\sim}303.2{\mu}g/g$). The sample concentration required for 50% reduction of DPPH free radical scavenging ($RC_{50}$) was $79.7{\mu}g/mL$ in freeze drying, and showed high antioxidant activity. Also it decreased from $122.4{\mu}g/mL$ to $87.7{\mu}g/mL$ with temperature increase during hot air drying. We therefore conclude from the above results that freeze drying is more suitable for the production of blackberry powder, because this method showed high value of chromaticity, total polyphenol, flavonoid, anthocyanin content, vitamin C and antioxidant activity.