• 소성∙가공
• /
• 제18권8호
• /
• pp.589-595
• /
• 2009

The hot forming process of an exhaust CAM for vessel engine was designed by finite element(FE) simulation and experimental analysis. An aim of process design was to achieve the near-net shaped CAM forgings by hot forging process. Based on the compression test results of the low alloy steel, power dissipation map was generated using the the dynamic materials model(DMM). From the map, the initial heating temperature was determined as 1200oC. FE analysis was simulated to predict the formation of forging defects and deformed shape with different forging designs. Optimum process design suggested in this work was made by comparing with the CAM for vessel engine manufactured by actual forging process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.112-115
• /
• 2007

In order to investigate the residual stress evolution during the leveling process of hot rolled high strength coils for cold forming, the in-plane residual stress of plate sampled at SPM, rough leveler and finish leveler were measured by cutting method. Residual stress was localized near the edge of plate. As the thickness of plate was increased, the region with residual stress was expanded. The gradient of residual stress within plate was reduced during the leveling process. But the residual stress itself was not removed at the ranges of tested conditions. From the measured residual stress distribution within the plate, camber of plate cut to small width was predicted exactly within error range of experiment.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.74-80
• /
• 2010

For the purpose of applying a hot-dip Zn-6mass%Al-3mass%Mg alloy coated steel sheet (ZAM) to automotive body materials, a laboratory study of the general properties required for inner and outer panels of automotive bodies was performed. Even with only light coating weight, ZAM showed an excellent corrosion resistance in terms of both cosmetic and perforation corrosion compared to the currently used materials for automotive bodies, GI70 and GA45. In our study, it was confirmed that ZAM exhibits as good as or better properties than GI70 in terms of spot weldability and press formability. Furthermore, since the same corrosion resistance can be achieved with less coating weight by applying ZAM, laser weldability is better than GI and GA.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.15-24
• /
• 1998

In this research. we have proposed a new technique to determine .the combination of design parameters for the process design of a hot forged product using artificial neural network(ANN) and statistical design of experiments(DOE). The investigated problem involves the adequate selection of the aspect ratio of billet, the ram velocity and the friction factor as design parameters. An optimal billet satisfying the forming limitation, die filling, load and energy as well as more uniform distribution of effective strain, is determined by applying the ability of artificial neural network and considering the analysis of mean and variation on the functional requirement. This methodology will be helpful in designing and controlling parameters on the shop floor which would yield the best design solution.

• 한국식품영양과학회지
• /
• 제24권6호
• /
• pp.837-842
• /
• 1995

고추가루 첨가 식이가 체액성 면역기능에 미치는 영향을 조사하였다. 실험동무로 흰쥐를 사용하여 대조군과 2%, 5%, 10% 고추가루 첨가 식이군을 설정한 후 27일간 실험식이로 사육하였다. 실험종료 10일 전에 각군의 흰쥐를 면양적혈구로 세차례 면역시킨 후 항체생성 세포수 및 혈청 중 항체 농도 등 체액성 면역기능을 중심으로 조사하였다. 그 결과, 대조군에 비해 고추가루 첨가 식이군의 항체 생성 세포수, 적혈구 응집반응 및 혈청중 항체 농도가 높은 것으로 나타났으며, 또한 이때 고추가루 첨가식이군의 각 장기조직 중 AsA 함량은 대조군에 비해 높은 것으로 나타났다. 이들 결과로 보아, 고추성분은 체액성 면역기능의 활성화에 기여하는 물질을 함유하고 있을 뿐만이 아니라, AsA의 공급효과가 뛰어난 것이 확인되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.221-222
• /
• 2011

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.13-13
• /
• 2001

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.38-39
• /
• 2003

• The Plant Pathology Journal
• /
• 제25권1호
• /
• pp.38-46
• /
• 2009

Lichen-forming fungi (LEF) were isolated from 67 Hungarian lichen species from ascospores or thallus fragments. LFF were successfully isolated from 26 species with isolation rate of 38.8%. Of the total number of isolation from ascospores (27 species) and thallus fragments (40 species), 48% and 32.5% of the species were successfully isolated, respectively. Comparison of rDNA sequences of ITS regions between the isolated LFF and the original thallus confirmed that all the isolates originated from the thallus fragments were LEF. The following 14 species of LEF were newly isolated in this study; Acarospora cervina, Bacidia rubella, Cladonia pyxidata, Lasallia pustulata, Lecania hyaline, Lecanora argentata, Parmelina tiliacea, Parmotrema chinense, Physconia distorta, Protoparmeliopsis muralis, Ramalina pollinaria, Sarcogyne regularis, Umbilicaria hirsuta, Xanthoparmelia conspersa and X. stenophylla. Antifungal activity of the Hungarian LFF was evaluated against plant pathogenic fungi of Colletotrichum acutatum, C. coccodes and C. gloeosporioides, causal agent of anthracnose on hot pepper. Among the 26 isolates, 11 LFF showed more than 50% of inhibition rates of mycelial growth of at least one target pathogen. Especially, LFF of Evernia prunastri, Lecania hyalina and Lecanora argentata were remarkably effective in inhibition of mycelial growth of all the tested pathogens with antibiotic mode of action. On the other hands, five isolates of Cladonia furcata, Hypogymnia physodes, Lasallia pustulata, Ramalina fastigiata and Ramalina pollinaria exhibited fungal lytic activity against all the three pathogens. Among the tested fungal pathogens, C. coccodes seemed to be most sensitive to the LFF. The Hungarian LFF firstly isolated in this study can be served as novel bioresources to develop new biofungicides alternative to current fungicides to control hot pepper anthracnose pathogenic fungi.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1221-1226
• /
• 2012

핫 스탬핑은 오스테나이트 변태 온도 이상에서 프레스 성형 후 급속히 냉각되는 고강도 부품을 제조하는 성형 방법이다. 매우 적은 양의 보론 성분을 가지고 있는 보론강은 핫 스탬핑에 사용되는 재료 중의 하나이다. 본 연구의 목적은 열처리 조건에 따르는 기계적 성질과 에릭슨 커핑 시험에 의하여 성형성을 조사하는 것이다. 다양한 온도에서 다이��칭은 대기 시간을 달리하여 실시하였다. 1173 K-0s에서 ��칭 후 TWB는 1203 MPa의 인장 강도를 얻었다. 이것은 모재 인장강도(1,522 MPA)의 79 %이다. 금형 온도(298, 523, 673 K)에 따른 보론강 TWB의 성형성은 차이가 크지 않았다. 그러나 성형 속도가 증가함에 따라 성형성이 감소하는 것을 확인할 수 있었다.