• 한국컴퓨터정보학회논문지
• /
• 제24권6호
• /
• pp.1-9
• /
• 2019

Hard disks, which have long been used as secondary storage in computing systems, are increasingly being replaced by solid state drives (SSDs), due to their relatively fast data input / output speeds and small, light weight. SSDs that use NAND flash memory as a storage medium are significantly different from hard disks in terms of physical operation and internal operation. In particular, there is a feature that data overwrite can not be performed, which causes erase operation before writing. In order to solve this problem, a hot data for frequently updating a data for a specific page is distinguished from a cold data for a relatively non-hot data. Hot data identification helps to improve overall performance by identifying and managing hot data separately. Among the various hot data identification methods known so far, there is a technique of recording consecutive write requests by using a Bloom filter and judging the values by hot data. However, the Bloom filter technique has a problem that a new bit array must be generated every time a set of items is changed. In addition, since it is judged based on a continuous write request, it is possible to make a wrong judgment. In this paper, we propose a method using a counting filter for accurate hot data verification. The proposed method examines consecutive write requests. It also records the number of times consecutive write requests occur. The proposed method enables more accurate hot data verification.

• 사물인터넷융복합논문지
• /
• 제8권5호
• /
• pp.77-83
• /
• 2022

낸드 플래시 메모리는 구조적으로 쓰기 전 지우기(Erase-Before-Write) 동작이 요구된다. 이것을 해결하기 위해서는 데이터 업데이트 동작이 빈번히 발생하는 페이지(Hot data page)를 구분하여 별도에 블록에 저장함으로 해결할 수 있으며 이러한 Hot data를 분류하는 기법을 핫 데이터 판단기법이라 한다. MHF(Multi Hash Function Framework)기법은 데이터 갱신요청의 빈도를 시스템 메모리에 기록하고 그 기록된 값이 일정 기준 이상일 때 해당 데이터 갱신요청을 Hot data로 판단한다. 하지만 데이터 갱신요청에 빈도만을 단순히 카운트하는 방법으로는 정확한 Hot data로 판단에 한계가 있다. 또한 데이터 갱신요청의 지속성을 판단 기준으로 하는 기법의 경우 갱신요청 사실을 시간 간격을 기준으로 순차적으로 기록한 뒤 Hot data로 판단하는 방법이다. 이러한 지속성을 기준으로 하는 방법의 경우 그 구현과 운용이 복잡한 단점이 있으며 갱신요청에 빈도를 고려하지 않는 경우 부정확하게 판단되는 문제가 있다. 본 논문은 데이터 갱신요청에 빈도와 지속성을 함께 고려한 경량화된 핫 데이터 판단기법을 제안한다.

• 한국컴퓨터정보학회논문지
• /
• 제22권2호
• /
• pp.1-7
• /
• 2017

Recently, NAND flash memory, which is used as a storage medium, is replacing HDD (Hard Disk Drive) at a high speed due to various advantages such as fast access speed, low power, and easy portability. In order to apply NAND flash memory to a computer system, a Flash Translation Layer (FTL) is indispensably required. FTL provides a number of features such as address mapping, garbage collection, wear leveling, and hot data identification. In particular, hot data identification is an algorithm that identifies specific pages where data updates frequently occur. Hot data identification helps to improve overall performance by identifying and managing hot data separately. MHF (Multi hash framework) technique, known as hot data identification technique, records the number of write operations in memory. The recorded value is evaluated and judged as hot data. However, the method of counting the number of times in a write request is not enough to judge a page as a hot data page. In this paper, we propose hot data identification which considers not only the number of write requests but also the persistence of write requests.

• 한국IT서비스학회지
• /
• 제13권4호
• /
• pp.359-375
• /
• 2014

Researchers cannot avoid missing data in collecting data, because some respondents arbitrarily or non-arbitrarily do not answer questions in studies and experiments. Missing data not only increase and distort standard deviations, but also impair the convenience of estimating parameters and the reliability of research results. Despite widespread use of hot deck, researchers have not been interested in it, since it handles missing data in ambiguous ways. Hot deck can be complemented using K-nn, a method of machine learning, which can organize donor groups closest to properties of missing data. Interested in the role of k-nn, this study was conducted to impute missing data based on the hot deck method using k-nn. After setting up imputation of missing data based on hot deck using k-nn as a study objective, deletion of listwise, mean, mode, linear regression, and svm imputation were compared and verified regarding nominal and ratio data types and then, data closest to original values were obtained reasonably. Simulations using different neighboring numbers and the distance measuring method were carried out and better performance of k-nn was accomplished. In this study, imputation of hot deck was re-discovered which has failed to attract the attention of researchers. As a result, this study shall be able to help select non-parametric methods which are less likely to be affected by the structure of missing data and its causes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권11호
• /
• pp.3935-3949
• /
• 2021

With the rapid development of Internet and big data technology, various online social network platforms have been established, producing massive information every day. Hot topic discovery aims to dig out meaningful content that users commonly concern about from the massive information on the Internet. Most of the existing hot topic discovery methods focus on a single network data source, and can hardly grasp hot spots as a whole, nor meet the challenges of text sparsity and topic hotness evaluation in cross-network scenarios. This paper proposes a novel hot topic discovery method across social network based on an im-proved LDA model, which first integrates the text information from multiple social network platforms into a unified data set, then obtains the potential topic distribution in the text through the improved LDA model. Finally, it adopts a heat evaluation method based on the word frequency of topic label words to take the latent topic with the highest heat value as a hot topic. This paper obtains data from the online social networks and constructs a cross-network topic discovery data set. The experimental results demonstrate the superiority of the proposed method compared to baseline methods.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.735-742
• /
• 2000

Densification behaviors of mixed metal powder under high temperature were investigated. Experimental data of mixed copper and tool steel powder with various volume fractions of Cu powder were obtained under hot isostatic pressing and hot pressing. By mixing the creep potentials of McMeeking and co-workers and of Abouaf and co-workers originally for pure powder, the mixed creep potentials with various volume fractions of Cu powder were employed in the constitutive models. The constitutive equations were implemented into a finite element program (ABAQUS) to compare with experimental data for densification of mixed powder under hot isostatic pressing and hot pressing. Finite element calculations by using the creep potentials of Abouaf and co-workers agreed reasonably well with experimental data, however, those by McMeeking and co-workers underestimate experimental data as observed in the case of pure metal powders.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.738-744
• /
• 2018

This paper proposes a low cost hot swap operation circuit of a parallel operation power supply for servers. Hot swap function for server power system is essential in 24 hour operation system such as internet data center, server, factory and etc. Server power supplies used in internet data centers have two or more parallel operations with the hot swap operation. However, the cost of the power supply is high because the controller IC for hot swap operation is very expensive. Therefore, this paper proposes a parallel-operated power supply with a low-cost hot swap controller for servers. The proposed system can operate hot swap function by using discrete devices and reduce the cost by more than 50%. A 1.2kW prototype system is implemented to verify the proposed low cost hot swap controller.

• 한국정보과학회논문지:시스템및이론
• /
• 제35권1호
• /
• pp.18-29
• /
• 2008

최근 NAND 플래시 메모리는 빠른 접근속도, 저 전력 소모, 높은 내구성, 작은 부피, 가벼운 무게 등으로 차세대 대용량 저장 매체로 각광 받고 있다. 그러나 이런 플래시 메모리는 데이타를 기록하기 전에 기존의 데이타 영역이 지워져 있어야 한다는 제약이 있으며, 비대칭적인 읽기, 쓰기, 삭제 연산의 처리속도 각 블록당 최대 소거 횟수 제한과 같은 특징들을 지닌다. 위와 같은 단점을 극복하고 NAND플래시 메모리를 효율적으로 사용하기 위하여. 다양한 플래시 전환 계층 제안되어 왔다. 기러나 기존의 플래시 전환 계층들은 Hot data라 불리는 빈번히 접근되는 데이타에 의해서 잦은 겹쳐쓰기 요구가 발생되며, 이는 급격한 성능 저하를 가져 온다. 본 논문에서는 Hot data 검출기를 이용하여, 매우 적은 양의 데이타인 Hot data를 검출한 후, 검출된 Hot data는 섹터사상 기법을 적용시키고, 나머지 데이타인 Cold data는 로그 기반 블록 사상 기법을 적용시키는 적응형 플래시 전환 계층(AFTL)을 제안한다. AFTL은 불필요한 삭제, 쓰기, 읽기 연산을 최소화시켰으며, 기존의 플래시 전환 계층과의 비교 측정을 통하여 성능의 우수성을 보인다.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3061-3071
• /
• 2000

Densification behavior of titanium alloy powder was investigated under hot pressing at various pressures and temperatures. Experimental date were obtained for densification of titanium alloy powder under an instantaneous loading and subsequent creep deformation during hot pressing. The constitutive models of Fleck et al. and the modified Gurson were employed for thermo-phastic deformation under the instantaneous loading and that f Abouaf and co-workers for creep deformation of titanium alloy powder during hot pressing. By implementing these constitutive equations into a finite element program(ABAQUS), finite element results were compared with experimental data during hot pressing. To investigate the effect of friction between the power and die wall, density distributions of power compacts were measured and compared with finite element calculations. Finite element results from the models of Fleck et al. and the modified Gurson agreed reasonably good with experimental data for densification and density distribution of titanium alloy powder under the instantaneous loading during hot pressing. Finite element results from the model of Abouaf and co-workers, however, somewhat overestimate experimental data for creep deformation of power compacts during hot pressing.

• 한국지능시스템학회논문지
• /
• 제20권6호
• /
• pp.761-767
• /
• 2010

낸드 플래시 메모리는 블록에 새로운 데이터를 쓰고자 할 때 삭제 연산이 선행되어야 하며 일정 횟수 이상 지움 연산이 반복된 블록은 더 이상 사용이 불가능하다. 데이터의 갱신이 빈번한 핫 데이터는 블록을 빠르게 사용 불가능한 상태에 도달하게 만들 수 있고 이로써 낸드 플래시 메모리의 용량은 시간이 지남에 따라 감소할 수 있다. 본 논문에서는 데이터의 접근 패턴을 고려해 핫 데이터와 콜드 데이터를 분류하는 알고리즘을 제시한다. 이렇게 분류된 데이터 정보를 이용해 삭제 횟수가 많은 블록에 갱신 확률이 적은 콜드 데이터를, 삭제 횟수가 상대적으로 적은 블록에 갱신 확률이 높은 핫 데이터를 맵핑한다. 입력 데이터 패턴을 이용한 핫/콜드 데이터 분류 기법이 기존의 분류 기법을 사용했을 때보다 플래시 메모리의 블록 사용이 균일한 것을 실험을 통해 확인하였다.