• 제목/요약/키워드: Hot waste water

검색결과 133건 처리시간 0.054초

EXHAUST GAS HEAT RECOVERY SYSTEM FOR PLANT BED HEATING IN GREENHOUSE PRODUCTION

  • Kim, Y.J.;Ryou, Y.S.;Rhee, K.J.;Kang, G.C.
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
    • /
    • pp.639-646
    • /
    • 2000
  • Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

  • PDF

20kW급 폐열회수 시스템 공정 설계에 관한 연구 (A Study on the Engineering Design for 20kW-Grade Waste Gas Heat Recovery)

  • 김경수;방세경;정은익;이중섭
    • 한국기계가공학회지
    • /
    • 제17권4호
    • /
    • pp.91-96
    • /
    • 2018
  • This study is collects design data through the process design of the organic Rankine cycle, which can produce 20kW of electric power through the recovery of waste heat. In this study, the simulation was conducted by using APSEN HYSYS in order to make the model for the process design of the 20kW class waste heat recovery system. For the thermodynamic model, the test was conducted with hot water as the heat source, with the water steam used as the cooling water for the cooler and the refrigerant R245fa in the cycle. In Case 1 and Case 2, it was expected and found that the cycle efficiency was 10.6% and that 36.86kw was produced, considering the margin of 84% of 20kW. In Case 3 and Case 4, it was expected and found from the simulation that the cycle efficiency was 12% and that 30.0kw was produced, considering the margin of 84% of 20kW.

250kW급 폐열회수 시스템 공정설계에 관한 연구 (A Study on the Engineering Design for 250kW-Grade Waste Gas Heat Recovery)

  • 김경수;방세경;서인호;이상윤;정은익;이중섭
    • 한국기계가공학회지
    • /
    • 제18권5호
    • /
    • pp.90-95
    • /
    • 2019
  • This study aims to gain the design data through the process design of the organic Rankine cycle, which can produce 250kW of electric power through waste heat recovery. In this study, a simulation was conducted using APSEN HYSYS to make the model for the process design of the 250kW-class waste heat recovery system. For the thermodynamic model, the test was conducted with hot water as the heat source, the water steam as the cooling water for the cooler, and the refrigerant R245FA in the cycle. In the final design, it was expected and found from the simulation that the cycle efficiency was 12.62% and that 250kW of power was produced considering the margin of 80%.

굴통조림 부산물 유래 인스턴트 분말 수프의 품질안정성 (Quality Stability of Instant Powdered Soup using Canned Oyster Processing Waste Water)

  • 김진수;허민수;허민수;조문래
    • 한국수산과학회지
    • /
    • 제34권4호
    • /
    • pp.389-393
    • /
    • 2001
  • 굴통조림 가공부산물 (세척수 및 자숙수) 유래 혼합분말수프를 효율적으로 이용하기 위해 이의 품질안정성에 대하여 검토하였다. 굴열수추출물 유래 분말 수프는 열수추출물 분말에 식염, 분말크림, 유대체 분말, 밀가루, 옥수수분말, 전분, 포도당, 양파가루의 일정량씩을 각각 혼합하여 제조하였다. 굴통조림 가공부산물 유래 혼합분말 수프는 열수추출물 유래 분말 및 식염대신에 세척액 및 자숙수 유래 혼합 분말 (자숙액 유래 분말 : 세척액 유래 분말=12:8)을 첨가하고, 기타 첨가물의 경우 굴 열수추출물 유래 분말 수프와 같은 비율로 첨가하여 제조하였다. 굴 통조림 가공부산물 유래 혼합분말수프의 경우 저장 중 수분함량, 수분활성, 과산화물값 및 지방산 조성은 거의 변화 없었고, pH, 휘발성염기질소, 갈변도는 약간 증가하는 경향을, 백색도는 약간 감소하는 경향을 나타내었다. 이와 같은 저장 중 성분 변화 경향은 굴통조림 가공부산물 유래 혼합분말수프와 굴 열수추출물 유래 분말수프 간에 차이가 거의 없었다. 이들 굴을 이용한 분말수프를 식용할 수 있게 조리하여 관능검사한 결과 저장 12개월 동안 품질에 큰 변화가 인정되지 않았다. 이상의 이화학적 및 관능적 검사 결과로 미루어 볼 때 굴 통조림 가공부산물 유래 혼합분말수프는 알루미늄 적층 필름(OPP, $20{\mu}m/PE,\;20{\mu}m/paper,\;45g/m^3/PE,\;20{\mu}m/Al,\;7{\mu}\;m/PE,\;20{\mu}m$)에 포장하는 경우 상온에서 12개월 동안 품질변화가 크게 인지되지 않아 안전하게 유통 가능하다고 판단되었다.

  • PDF

A Study on the Purification of Water-Pool in Irradiated Materials Examination Facility

  • Song, Ung-Sup;Lee, Jong-Heon;Lee, Hong-Gyee;Hong, Kyon-Pyo
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
    • /
    • pp.42-50
    • /
    • 2004
  • The pool $(3m{\times}6m{\times}10m{\times}$ in Irradiated Materials Examination Facility is generally used to transport irradiated materials between a moving cask and hot-cell. During the operation in the pool such as loading/unloading the cask, holding specimen and bucket elevation, water maybe contaminated by radioactive or contaminated impurities from irradiated materials. Then, it must be purified and filtered continuously to keep lower radioactivity than that of regulation prescribed by RCA Korea Activity in a part of radioactive contamination control. This paper described radioactive contamination distribution of water as transported materials, which is related to effective operation of purification and filtration system.

  • PDF

폐목재-플라스틱을 이용한 복합패널의 특성 연구 (A Study on Properties of Waste Wood-Plastic Composite Panels)

  • 문경주;최낙운;최산호
    • 유기물자원화
    • /
    • 제12권4호
    • /
    • pp.85-94
    • /
    • 2004
  • 본 연구에서는 가연성 건설폐기물인 폐목재와 폐발포폴리스티렌의 유효이용을 목적으로 열압성형법에의한 폐목재-플라스틱 복합패널을 제조하였다. 전열프레스를 이용하여 다양한 성형조건하에서 복합패널 공시체를 제조하였으며, 그 겉보기 밀도, 흡수율, 흡수에 의한 두께 팽창률, 휨강도 등에 관한 일련의 실험을 행하였다. 폐목재-플라스틱 복합패널의 밀도는, 성형 온도 및 성형 시간에 관계없이, 성형 압력의 증가에 따라 높아지는 반면, 그 흡수율의 성형압력의 증가에 따라 작아진다. 복합패널의 흡수에 의한 두께 팽창률은, 성형 조건에 관계없이, 모두 1.2~2.0%의 범위에 있어, 높은 치수 안정성을 보인다. 복합패널의 휨강도는, 성형 온도 $120^{\circ}C$, 성형 시간 15min에서 일정하게 되는 경향이 있으며, 성형 온도 및 성형 시간에 관계없이, 성형 압력의 증가에 따라 현저하게 증가한다. 중합 반응과 성형을 동시에 하는 리액션프로세싱인 이 방법은, 그 제조 공정이 간단하고, 또한, 결합재로서 폐발포폴리스티렌 용액을, 골재로서 폐목재 칩을 이용하기 때문에, 공업 생산성이 있는 건설 발생 폐목재 및 폐발포폴리스티렌의 리사이클 방법으로서 지극히 유효하다고 생각된다.

  • PDF

Incubation of Scenedesmus quadricauda based on food waste compost

  • Kim, Keon Hee;Lee, Jae Han;Park, Chae Hong;Oh, Taek Keun
    • 농업과학연구
    • /
    • 제47권4호
    • /
    • pp.1039-1048
    • /
    • 2020
  • Food waste causes various economic losses and environmental pollution problems such as soil pollution and groundwater pollution. Food waste has been used as a resource in various forms and has been used mostly for feed and composting. This study compared microalgal nutrient medium (BG-11) with food waste compost to determine the possibility of using it as a culture medium. Scenedesmus quadricauda was isolated and cultured in an eutrophic reservoir and incubated for 3 days in distilled water before laboratory use. Food waste compost was produced in two food waste processing facilities, and hot water was extracted in the laboratory to be used for microalgae cultivation. The growth curve of the microalgae was analyzed based on the Chl-a concentration measured during the experiment, and the growth rate of the microalgae grown in the food waste compost was compared with the growth rate of those grown in the nutrient medium. Food waste compost showed a similar growth rate to that of the nutrient medium, and there was a difference depending on the manufacturing facility. The growth of microalgae in such food waste was further amplified when trace elements were added and showed better growth than that of the nutrient media. Particularly, when trace elements were added, the growth rate increased, and the growth period was further extended. Therefore, food waste compost can be sufficiently utilized as a microalgal culture medium, and if trace elements are added, it is considered that microalgae can be more effectively cultured compared to the existing nutrient medium.

신재생에너지 이용 과채류에 대한 소비자 인식 및 지불의사에 관한 연구 (A Study on Consumers' Perception and Willingness to Pay for Fruits and Vegetables Using Renewable Energy)

  • 김성휘;이춘수
    • 한국유기농업학회지
    • /
    • 제29권4호
    • /
    • pp.485-505
    • /
    • 2021
  • This study investigated consumers' perceptions and willingness to pay (WTP) for fruit and vegetables grown using renewable energy such as solar power, geothermal, waste heat from incinerators, hot water from thermal power plants. To this end, this study conducted an online survey of 1,050 consumers in Seoul, Gyeonggi, and the six metropolitan cities, and the main findings are as follows. First, most of the consumers perceived climate change as a serious problem, and 82.8% recognized the government's declaration of carbon zero was appropriate, which means that the government's active response to climate change is important. Second, on the pros and cons of the use of renewable energy when cultivating fruits and vegetables, opinions in favor of solar power were the highest, followed by geothermal heat, waste heat from waste incineration plants, and thermal power generation hot drainage. Third, at least 28.0% to 41.7% of consumers were willing to purchase fruits and vegetables using renewable energy more expensive than fruits grown using fossil energy such as kerosene. This means that the fruit and vegetable market using renewable energy is valuable as a niche market.

스프레이 열전달을 이용한 저온도차 스털링 엔진의 고온수 공급 유량 및 온도에 따른 기계 부하성능 실험 (Mechanical Load Performance Measurements of a Low Temperature Differential Stirling Engine with Water-Sprayed Heat Transfer according to Supply Water Flow Rates and Temperatures)

  • 심규호;정민성;이윤표;장선준
    • 한국유체기계학회 논문집
    • /
    • 제18권1호
    • /
    • pp.29-36
    • /
    • 2015
  • Recently, Stirling engines are emerging as a key device for power conversion of renewable energy or waste energy. This study develops a LTDSE(Low Temperature Differential Stirling Engine) using a water spray for higher heat transfer and performs load performance tests for various flow rates and temperatures of hot water spray for variable engine loads emulated by a mechanical friction device. Internal temperature and pressure, working frequency and inlet and outlet temperature of the supply water are measured. As a result, the increases in flow rate and temperature of hot water respectively enhance the power output, efficiency and the working frequency, while the increasing engine load leads to decreases in working frequency but increases in the pressure amplitude. Eventually, it is revealed there exists a maximum shaft power of the test engine.

주성분분석기법을 적용한 온천 및 폐광산 오염원에 대한 하천수질평가 (Assessment of River Water Quality Contaminated by Abandoned Mine and Hot-Spring using Principal Component Analysis)

  • 이재영;;강미아;정교철
    • 지질공학
    • /
    • 제15권4호
    • /
    • pp.381-390
    • /
    • 2005
  • 일본의 5시는 상수원수로서 T하천을 이용하고 있으며, T하천의 수질은 비소와 보론 등의 폐광산 및 온천유래의 오염원에 의한 수질특성을 갖고 있다. 이 연구는 T하천의 수질특성 에 대하여 주성분분석 기법을 적용하여 분석하여 보다 용이한 하천관리 인자를 도출하고자 하였다. 이 연구에서 제시한 hexa-diagram을 이용하면, 각 수질측정 지점에서의 주요 오염원을 쉽게 파악할 수 있어 하천관리에 유효한 지표로 사용될 수 있다. 또한 주성분분석을 적용하여 하천수질의 특성을 조사한 결과, 1st, 2nd, 3rd 성분들의 각 고유값은 5.30, 2.78 및 1.47로 나타났으며, 1st, 2nd, 3rd 성분들의 기여도는 각각 $40.80\%,\;21.40\%\;및\;11.31\%$로 나타났다. 그러므로 이들 주성분을 이용하면, T하천의 수질특성을 보다 정확하고 신속하게 평가할 수 있다고 판단된다. 온천수의 주요성분으로 나타나는 염소이 온은 정수처리 공정에서 제거하기가 곤란한 비소와 보론의 관계에서 매우 높은 상관관계를 나타내어 염소이온농도를 이용한 하천관리는 비소와 보론 분석에 드는 시간적, 경제적인 부하를 저감하여 보다 신속한 처리가 가능하도록 하므로 하천수질관리의 효율을 개선할 것으로 기대한다.