• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.473-478
• /
• 2012

The yoke, a component of conventional motor-driven power steering system, often contains welding defects from its manufacturing process. To eliminate these defects, the precision cold forging process has been tried. In this study, the double-action complex forging has been used to manufacture a torsion joint yoke. The backward extrusion proved faster than the forward extrusion in forging of the product. The double-action complex forging process utilized an upper die composed of a punch, a punch guide, a disc spring and a coil spring. The forged material pushes up the punch guide, and then the disc spring and the coil spring balances the backward extrusion force. Consequently, the flow of material was essentially in the forward direction, resulting in a successful forging operation. The forging load of Al 6061-T6 was higher than that of the automotive structural hot rolled plate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.331-336
• /
• 1990

In order to evaluate the adaptability of Aardi goats to arid environment, 5 Aardi bucks were deprived of water for four days during spring and summer seasons. The rise in average maximum ambient temperature from $24.8^{\circ}C$ in spring to $35.8^{\circ}C$ in summer caused a significant rise in rectal temperature ($0.3^{\circ}C$), respiratory rate (62%), serum osmolaity (8%) and serum sodium concentration (17%). While, it resulted in a significant decline in dry matter intake (50%), urine volume (74%) and fecal water excretion (60%) compared with their values in spring, but had no significant effect on the volume of drinking water. At the end of the 4-days deprivation period during spring, respiratory rate, dry matter intake and urine volume were reduced by 18, 77 and 91% relative to their average in control goats. The corresponding reduction in summer were 58, 100 and 100%. Serum osmolaity was risen by 15% in spring deprived goats and 29% in summer deprived goats. Rectal temperature rose by a mean value of $1.3^{\circ}C$ only in goats deprived of water in summer. Percent of moisture in the feces declined from 64 in control goats, to 24% in water deprived goats during spring season. The corresponding values in summer were 25 and 6%. These responses of Aardi goats deprived of water in summer indicate that they possess a water economy mechanism enable them to tolerate infrequent drinking in hot-arid environment.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.63-68
• /
• 2000

We have developed a new relief valve which is a safety device for the domestic gas-fired hot water boilers. The relief valve has been designed to expand the inner diameter of the inlet, the outlet and the seat of the valve considering the relief capacity, and also to separate the spring from the room heating water. Therefore, we could minimize the adhesion and/or obstruction of the inlet and the corrosion phenomena of the spring which used to be the problem of the conventional relief valves. Test results of the developed relief valve showed that the performance of the opening pressure, reseating pressure, tightness, endurance were excellent, and the operating boiler with developed relief valve was evaluated as very good. The standardization and application of the relief valve can provide the advantage of component exchange and easy maintenance and repair.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.110-123
• /
• 2024

Onyanghaenggung Palace(temporary palace at Onyang) is an important cultural heritage that can substantially confirm the king's visiting at hot springs based on literature records such as <Ongungyeonggoedae(溫宮靈槐臺)>, <Oncheonhaenggungdo(溫泉行宮圖)> of 『Ongungsasil(溫宮事實)』, <Younggoedaedo(靈槐臺圖)>, 『Younggoedaegi(靈槐臺記)』 and cultural properties such as Yeonggoedae(靈槐臺) and Shinjeong Monument(神井碑). Through a photo taken by Hermann Sander in 1906, it can be confirmed that the hot springs(Tangsil building) at Onyanghaenggung Palace during the Joseon Dynasty was maintained until the early Japanese colonial period. The purpose of this study is to estimate the compositions of the hot springs(Tangsil building) in Onyanghaenggung Palace based on literature records and <Oncheonhaenggungdo>(1795). To achieve these purposes, we firstly examined the changes in Onyanghaenggung Palace and the hot springs (Tangsil building); secondly, the bathing behaviors of kings were reviewed; thirdly, we organized the architectural composition of the hot springs (Tangsil building) according to "Ongung Repair" of 『Ongungsasil (溫宮事實)』; and fourthly, by comparing Sander's photo in the early days of Japanese colonial rule, the architectural composition of the hot springs (Tangsil building) in the late Joseon Dynasty was examined. The results of this study are as follows. First, the hot springs(Tangsil building) of Onyanghaenggung Palace were continuously connected to the Onjeongsil(溫井室) in the reign of King Hyeonjong and maintained until 『Hoseo-eupji』 (1871) in the late Joseon Dynasty. It matches the photograph taken by Hermann Sander(1906) and <1912 Onyang Hot Springs in Asan City>(1912) of Korea Copyright Commission during the early Japanese colonial period. Second, the various king's bathing methods during the Joseon Dynasty were adopted such as washing, spilling and bathing head while sitting on a bathing platform or chair, or exposing the steam of hot spring water, dipping feet into the water and a half-body soaking bath below the navel immersed in water. Third, the stone bathtubs of hot springs(Tangsil building) are composed of the upper bath which was hot spring water gushes out from the northwest, bends to the east, enters the middle bath, and bends to the south to come out to the outside to gather in the lower bath. Around the stone bathtubs, pebble stones brought in from Taean were laid on the floor of the hot springs(Tangsil building). From the above considerations, the compositions of the Tangsil building in Onyang Temporary Palace is based on the king's approach from the main royal building, the king's bathing method and bathing tools, the bathing behavior of enlisted medical officers and bathing assistants, and each rooms mentioned in "Ongung Repair". By comparing it with Hermann Sander's photo, the architectural compositions of the hot springs(Tangsil building) can be estimated.

• Journal of the Korean Regional Science Association
• /
• v.34 no.4
• /
• pp.19-34
• /
• 2018

The purpose of this study is to analyze the seasonal issues using the local newspaper articles with the keyword beach from 2004 to 2017. Topic modeling and Time series regression analysis based on open source programs were performed for analysis. Topic modeling results showed 35 topics in spring, 47 topics in summer, 36 topics in autumn and 35 topics in winter. The common themes were 'beaches', 'festivals and events', 'accident and environmental issues', 'tourism', 'development and sale', 'administration and policy' and 'weather'. Time series regression analysis showed in the spring, 5 Hot-Topics and 2 Cold-Topic were found out of the 35 topics. In the summer, 6 Hot-Topics and 3 Cold-Topic were found out of the 47 topics. In the autumn, 4 Hot-Topics and 3 Cold-Topic were found out of the 36 topics. In the winter, 3 Hot-Topics and 3 Cold-Topic were found out of the 35 topics. And for each season, topics that do not fall into the Hot-Topic and Cold-Topic are classified as Neutral-Topic. In this study if seasonal uses are different such as beaches are deemed that seasonal topic modeling for analysis of regional issues will yield more useful results and enable detailed diagnosis.

• Journal of the Korean earth science society
• /
• v.28 no.5
• /
• pp.598-602
• /
• 2007

A long-term in situ observation was carried out in the Ice-valley at Milyang in order to explain the factors and processes associated with the summertime ice formation. The variation of temperature inside Ice-valley in relation with ice formation in summer time was found to depend on precipitation rate in spring and cold air sinking in autumn and winter. The rate of temperature rising tends to correspond to sensible heat release depending on the precipitation amount at the freezing location. The reason of the cold air accumulation in a talus in the Ice-valley is the cold air sinking over the surface of talus due to the occurrence of outside clod air mass and the accumulated cold air from autumn to spring flow outside at the bottom of talus. The out-flowing cold air can result in the ice formation in the hot summer.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.345-358
• /
• 1999

To study the influences of thermal effluents flowing from hot spring on epilithic algal community, seasonal survey was carried out at stream and its watersheds from Seokjeong hot spring in Chollabuk-Do, Korea. Totally 7 points were divided into three regions fur sampling of water and epilithic algae, such as the direct effected, uneffected and the mixed region, respectively. At the discharging points of effluents, a dark-green cyanobacterial mat were remarkably constructed, mainly by two cyanobacteria, Oscillatoria and Phormidium. The mat formation were more obvious at low temperature than any other season, and even result in disappear with downstream and season. Totally, one hundred and fifty-three taxa of epilithic algae were classified with 15 unidentified species. Among the, diatoms occupied 58％ of total species, whereas cyanobacteria was 67% of total biomass, comparatively. In terms of stream direction, relative abundance of cyanobacteria was only limited in the upstream in cold season, and result in this pattern disappeared with season change. Although all physicochemical variables at the discharging points, was very high, compare to other points, they were quickly decreased downstream. Among them, some heavy metals were not detected or below the detection levels at downstream. Nitrate nitrogen increased with downstream, as well as phosphorus and sulfate have a similar trend throughout, while ammonia quickly decreased in the initial period of discharging effluents. This suggest that although the thermal effluent with high temperature and organic compounds could polluted the small study stream, various contributions such as flowing water, intake of uneffected streawater and collaboration of cyanobacterial mat and stream bottom gradually induces a stable water system.

• Transactions of Materials Processing
• /
• v.27 no.4
• /
• pp.236-243
• /
• 2018

A multi-point forming die (MPFD), which has been used for producing curved plates, is capable of forming various curved plates with just one MPFD. However, in real industries, an MPFD is difficult to be adopted since the structural properties, punch strength, elastic recovery correction and dimensional accuracy become problems. In order to overcome these problems, the hot multi-point forming die (HMPFD) was proposed in this study. This HMPFD commonly provide more less spring-back and forming load than conventional MPFD. Nevertheless, this process is very difficult to form the curved plate, because the final curved shape of the plate depends on many process variables such as the punch/nozzle arrangement (height and distance), the radius of punch, contact conditions between plate and punch. In this study, the forming characteristics of HMPFD and conventional MPFD are compared with each other through the finite element analysis.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2001.06a
• /
• pp.116-117
• /
• 2001

A thermotolerant bacterium, designated as PHS1, was isolated from a hot spring in Pohang, Korea, on the basis of its ability to grow on BTEX as a sole carbon source. We cloned and sequenced the entire BTEX-degrading pathway genes of PHS1 and found that two multicomponent mono-oxygenases together with meta-pathway genes are responsible for the BTEX biodegradation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1373-1377
• /
• 2014

Hot-stamping is a method of obtaining ultrahigh-strength steel by simultaneously forming and cooling boron steel in a press die after it has been heated at $900^{\circ}C$ or above. After heat treatment, boron steel has a strength of 1500 MPa or more. This material ensures a high level of quality because it overcomes the spring-back phenomenon, which is a problem associated with high-strength steel materials, and the degree of dimensional precision is improved by 90 or more because of the good formability compared with existing types of steel. In this study, the welding characteristics were identified through the butt and lap welding of hot-stamped steel using a disk laser. Full penetration was obtained at a faster speed with butt welding compared to lap welding, and a white band was observed in every specimen.