References
- D. F. Walczyk, D. E. Hardt, 1998, Design and Analysis of Reconfigurable Discrete Dies for Sheet Metal Forming, J. Manuf. Syst., Vol. 17, No. 6, pp. 436-454. https://doi.org/10.1016/S0278-6125(99)80003-X
- H. A. Ameen, H. A. Alsabti, 2016, Finite Element Analysis of the Dish Multi-Point Forming Process, Int. J. Eng. Res. Technol., Vol. 5, Issue. 07, pp. 286-295.
- Z. R. Wang, S. J. Yuan, 2006, New forming technologies used in manufacturing large vessels, Int. J. Mach. Tools Manuf., Vol. 46, pp. 1180-1187. https://doi.org/10.1016/j.ijmachtools.2006.01.022
- M. Li, Y. Liu, S. Su, G. Li, 1999, Multi-point forming: a flexible manufacturing method for a 3-d surface sheet, J. Mater. Process. Technol., Vol. 87, pp. 277-288. https://doi.org/10.1016/S0924-0136(98)00364-1
- S. C. Heo, T. W. Ku, W. J. Song, J. Kim, B. S. Kang, 2010, Study of Flexible Forming Process Involving the Use of Sectional Flexible Die for Sheet Material, Trans. Kor. Soc. Mech. Eng., Vol. 34, No. 3, pp. 299-305. https://doi.org/10.3795/KSME-A.2010.34.3.299
- Y. H. Seo, S. C. Heo, T. W. Ku, J. Kim, B. S. Kang, 2011, Design of Flexible Die Punch and Control System for Three-dimensional Curved forming Surface, Trans. Mater. Process., Vol. 20, No. 3, pp. 206-213. https://doi.org/10.5228/KSTP.2011.20.3.206
- J. S. Yoon, J. H. Lee, C. H. Ryu, S. H. Hwang, H. B. Lee, 2008, Application of IDA Method for Hull Plate Forming by Multi-Point Press Forming, Kor. Soc. Ocean Eng., Vol. 22, No. 6, pp. 75-82.
- S. Y. Hwang, J. H. Lee, Y. S. Yang, M. J. Yoo, 2010, Springback adjustment for multi-point forming of thick plates in shipbuilding, Comput. Aided Design, Vol. 42, pp. 1001-1012. https://doi.org/10.1016/j.cad.2010.01.005
- Q. F. Zhang, Z. Y. Cai, Y. Z. Zhang, M. Z. Li, 2013, Springback compensation method for doubly curved plate in multi-point forming, Mater. Des., Vol. 47, pp. 377-385. https://doi.org/10.1016/j.matdes.2012.12.005
- Q. Zhang, Z. R. Wang, T. A. Dean, 2008, The mechanics of multi-point sandwich forming, Int. J. Mach. Tools Manuf., Vol. 48, pp. 1495-1503. https://doi.org/10.1016/j.ijmachtools.2008.04.003
- Q. Liu, C. Lu, W. Fu, K. Tieu, M. Li, X. Gong, 2012, Optimization of cushion conditions in micro multipoint sheet forming, J. Mater. Process. Technol., Vol. 212, pp. 672-677. https://doi.org/10.1016/j.jmatprotec.2011.07.015
- F. X. Tan, M. Z. Li, Z. Y. Cai, 2007, Research on the process of multi-point forming for the customized titanium alloy cranial prosthesis, J. Mater. Process. Technol., Vol. 187, pp. 453-457.
- S. C. Heo, Y. H. Seo, H. G. Noh, T. W. Ku, B. S. Kang, 2010, Numerical Study on Effect of Using Elastic Pads in Flexible Forming Process. Trans. Kor. Soc. Mech. Eng., Vol. 34, No. 5, pp. 549-556. https://doi.org/10.3795/KSME-A.2010.34.5.549
- Y. V. R. K. Prasad, S. Sasidhara, 1997, Hot Working Guide, 1st ed., The materials Information Society, USA, pp. 101-103.
- D. H. Ko, S. K. Lee, Y. N. Kwon, S. W. Kim, H. S. Lee, E. S. Park, B. M. Kim, D. C. Ko, 2011, Roll Die Forming Process for Manufacturing Clutch Hub in Automotive Transmission, Trans. Mater. Process., Vol. 20, No. 2, 154-159. https://doi.org/10.5228/KSTP.2011.20.2.154
- J. M. Lee, I. K, Lee, D. S. Kim, I. K. kwon, S. B. Lee, B. M. Kim, 2012, FE-Analysis of Hot Forming of Al Large Thick Plate for Spherical LNG Tank Considering Cooling Performance of Grid-Typed Die, Kor. Soc. Precis. Eng., Vol. 29, No. 11, pp. 1190-1198. https://doi.org/10.7736/KSPE.2012.29.11.1190
- J. Lee, J. Pan, 2016, Closed-form analytical solutions for calculation of loads and contact pressure for roller and ball bearings, Tribol. Int., Vol. 103, pp. 187-196. https://doi.org/10.1016/j.triboint.2016.06.042