• Journal of Preventive Medicine and Public Health
• /
• 제21권2호
• /
• pp.238-244
• /
• 1988

This study was conducted to investigate the causes of burn and emergency cares taken on the spot for the burn patient. Study population included 161 burn patients admitted to 2 university hospitals and 1 general hospital in Taegu from November 1, 1987 to April 30, 1988. Patients or guardians were interviewed with a structured questionnare. Out of 161 burn patients 111(68.9%)were males and 50(31.1%) females. Preschool children of 1-4 years old accounted for 29.8% of the total patients. Burns of children under 15 years of age took place at home in 91.0%, while 48.3% of burns of adult (15 years and over)males occurred at the working place, and 68.0% of adult females occurred at the home. Out of total burns occurred at home 39.8% took place at kitchen/dining room and 24.1% in the room. The most common cause of burns in children was the boiling water or hot food (74.3%). In adults the common causes were electrical burn(22.4%), hot water or food(19.0%) and explosion(12.1%) for males, and hot water or food(32.0%) and explosion (20.0%) for females. Common emergency cares for the burn taken on the spot were undressing(64.6%), pouring Soju(liquor)(13.7%), and pouring cold water(5.0%). There were a few cases who applied ash, soy or salt. To prevent burn, it is recommended to remodel the traditional kitchen and coal-briquet hole, to strengthen the safety control of LP Gas and LN Gas supply, to educate the public for the handling method for such gases, to strengthen the occupational safety control, to improve the safety device for the electric wire and socket, and to limit the temperature of hot water at home and public baths.

• 한국농공학회논문집
• /
• 제53권1호
• /
• pp.71-81
• /
• 2011

Due to increased human activities and intensive rainfall events in a watershed, soil erosion and sediment transport have been hot issues in many areas of the world. To evaluate soil erosion problems spatially and temporarily, many computer models have been developed and evaluated over the years. However, it would not be reasonable to apply the model to a watershed if topography and environment are different to some degrees. Also, source codes of these models are not always public for modification. The ArcGIS model builder provides ease-of-use interface to develop model by linking several processes and input/output data together. In addition, it would be much easier to modify/enhance the model developed by others. Thus, simple model was developed to decide soil erosion hot spot areas using ArcGIS model builder tool in this study. This tool was applied to a watershed to evaluate model performance. It was found that sediment yield was estimated to be 13.7 ton/ha/yr at the most severe soil erosion hot spot area in the study watershed. As shown in this study, the ArcGIS model builder is an efficient tool to develop simple models without professional programming abilities. The model, developed in this study, is available at http://www.EnvSys.co.kr/~sateec/toolbox for free download. This tool can be easily modified for further enhancement with simple operations within ArcGIS model builder interface. Although very simple soil erosion and sediment yield were developed using model builder and applied to study watershed for soil erosion hot spot area in this study. The approaches shown in this study provides insights for model development and code sharing for the researchers in the related areas.

• The Plant Pathology Journal
• /
• 제30권2호
• /
• pp.125-135
• /
• 2014

A population model of bacterial spot caused by Xanthomonas campestris pv. vesicatoria on hot pepper was developed to predict the primary disease infection date. The model estimated the pathogen population on the surface and within the leaf of the host based on the wetness period and temperature. For successful infection, at least 5,000 cells/ml of the bacterial population were required. Also, wind and rain were necessary according to regression analyses of the monitored data. Bacterial spot on the model is initiated when the pathogen population exceeds $10^{15}cells/g$ within the leaf. The developed model was validated using 94 assessed samples from 2000 to 2007 obtained from monitored fields. Based on the validation study, the predicted initial infection dates varied based on the year rather than the location. Differences in initial infection dates between the model predictions and the monitored data in the field were minimal. For example, predicted infection dates for 7 locations were within the same month as the actual infection dates, 11 locations were within 1 month of the actual infection, and only 3 locations were more than 2 months apart from the actual infection. The predicted infection dates were mapped from 2009 to 2012; 2011 was the most severe year. Although the model was not sensitive enough to predict disease severity of less than 0.1% in the field, our model predicted bacterial spot severity of 1% or more. Therefore, this model can be applied in the field to determine when bacterial spot control is required.

• 한국지리정보학회지
• /
• 제18권4호
• /
• pp.100-118
• /
• 2015

본 연구는 위성영상을 이용하여 객체기반 토지피복 분류도를 구축하고 공간통계기법을 통하여 토지피복의 분류항목별 분포패턴을 파악하였다. 객체기반 분류는 분광정보, 질감정보, 분광정보와 질감정보의 조합에 의하여 각각의 토지피복 분류도를 구축하였으며, 정확도 평가를 통하여 최적의 토지피복 분류도를 선정하였다. 또한, 토지피복의 분류항목별 공간적 분포패턴을 파악하기 위하여 핫스팟 분석을 실시하여 정량화하였다. 객체기반 분류를 위한 최적의 가중치는 Scale 52, Shape 0.4, Color 0.6, Compactness 0.5, Smoothness 0.5로 선정하였다. 토지피복 분류도는 분광정보와 질감정보의 조합을 사용하였을 때, 전체 분류정확도가 가장 높았으며, 특히 밭과 시설재배지, 나지의 경우 분광정보만을 사용하였을 때 보다 정확도가 약 12% 이상 증가하였다. DMZ일원의 분류항목별 면적비율은 산림 > 논 > 교통시설 > 초지 > 밭 > 나지 > 건물 > 수역 > 시설재배지 순으로 높았으며, 특히, 양구군의 밭과 교통시설은 민간인통제선 이북지역, 철원군의 밭, 인제군의 산림과 교통시설은 민간인통제선 이남지역에서 주로 분포하는 것으로 나타났다. 분류항목별 분포 패턴의 경우, 농업과 관련된 논, 밭, 시설재배지의 핫스팟(hot spot)은 철원군의 평야 지역과 양구군의 분지 지역에 집중 분포하였다. 나지, 수역, 건물, 도로의 핫스팟 지역은 농업과 관련된 핫스팟 지역과 분포 패턴이 유사한 반면, 산림과 초지의 핫스팟 지역과는 분포 패턴이 상이하였다.

• 대한원격탐사학회지
• /
• 제33권6_2호
• /
• pp.1101-1118
• /
• 2017

급격한 도시화와 이상기후의 증가로 도시의 기온이 꾸준히 올라가고 있으며, 한 도시 안에서도 열분포 양상이 지역마다 다르게 나타나고 있어 상세한 도시 열환경 분석이 요구된다. 최근에는 위성자료를 이용한 열환경 분석이 수행되고 있으나, 위성자료는 시 공간해상도의 Trade-off 관계로 인해 정밀한 분석에 어려움이 따른다. 이 연구는 2012년부터 2016년의 대구광역시 여름철 열환경 분석을 위해, MODIS(Moderate Resolution Imaging Spectroradiometer) 1 km 공간해상도의 낮과 밤 지표면온도(낮$LST_{1km}$, 밤$LST_{1km}$)를 250 m 공간해상도(낮$LST_{250m}$, 밤$LST_{250m}$)로 상세화 시켰다. 상세화에는 기계학습 기법인 랜덤 포레스트(Random Forest)가 이용되었다. 향상된 $LST_{250m}$는 기존의 $LST_{1km}$에 비해, 대구광역시 행정동 기준 불투수면적 비율과 지표면온도가 높은 상관관계를 보여주었다. 다음으로, 상세화 된 낮과 밤$LST_{250m}$를 이용하여 Hot Spot 분석을 수행하였다. 대구광역시 행정동 중 낮과 밤 지표면온도가 Hot Spot으로 군집화된 영역을 비교하고, 토지피복도를 이용하여 그 원인을 분석했다. 낮에는 공업 및 상업지역의 비율이 높은 영역에서, 밤의 경우 주거지역의 비율이 높은 영역에서 높은 Hot Spot이 군집 되었다. 본 연구의 열환경 분석 접근은 향후 도시정책 수립 및 국민안전에 큰 기여를 할 수 있을 것으로 기대된다.

• 대한방사선치료학회지
• /
• 제5권1호
• /
• pp.68-73
• /
• 1992

If the same weight is used in parallel opposed 6 and 10 MV x-ray beams, the lowest dose is achieved at SAD. Therefore, dose homogeneity in the target volume is decreased when SAD is taken at center of target volume than center of phantom or patient. With Standard deviation of ${\pm}6\%$ that repuesented the dose homogeneity in tarhet volume, we studied the optimized beam weights at which hot spot dose was least in parallel opposed beams. The optimized beam weights that maximally decrease the hot spot dose, wer 1.29, 1.19, 2.71, 3.50, and 4.70 in 6 MV x-ray and 1.25, 1.53, 1.90, 2.36, 3.01, and 3.7 in 10 MV x-ray, reapectively, when center of target volume was changed to 2,4,6,8,10, and 12cm from center plan of phantom along the centeral axis of beams.

• Journal of Welding and Joining
• /
• 제30권1호
• /
• pp.72-77
• /
• 2012

Recently, according to the increase of income and development of quality of life, the leisure industry has been developed. In particular, the interest of design and manufacture technology of leisure yacht has significantly increased. However, domestic market of leisure ships is currently in its initiating stage. So research and development for structural strength of leisure yacht need to be investigated. In this study, lug of yacht's mast which is known for a critical damage region is explicitly considered. This paper deals with the estimation of stress concentration factors (SCFs) for lug of yacht's mast depending on dimensions of lug using hot spot stress. Also, SCF formulae is suggested using parametric study.

• 신재생에너지
• /
• 제6권1호
• /
• pp.38-45
• /
• 2010

Abstract Under the physical stress on photovoltaic (PV) module, it will be warped according to elongation of the front glass and then micro-crack will be occurred in the thermally sealed solar cell. This micro-crack leads to drop of short circuit current of the PV module. This is because of increase of resistance component by micro-crack. Micro-crack at specific solar cell in the module lessens the durability of PV module with reduced output, hot-spot caused by solar cell output mismatch and increased resistance component. This study shows the relation between electrical characteristics and micro- cracks due to mechanical stress on PV module.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.6-11
• /
• 2013

In this paper, the temperature characteristics of mold transformer for the distribution power system have been analyzed by using computational fluid dynamics(CFD). The model has been modeled by coil, cores, insulating materials and frames about 3MVA grade mold transformer and analyzed the temperature distribution of the structure with a heat fluid. The fluid, which is incompressible ideal gas, is analyzed as a turbulent flow phenomenon on the assumption that it is natural cooling of transformer cooling system. Through this study, by examining the temperature distribution and hot-spot of the structure field of the mold transformer, cooling design and temperature distribution information, which are demanded for designing are estimated.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6081-6088
• /
• 2012

불균형 클러스터링은 클러스터의 크기를 서로 다른 크기로 나누는 방법으로 균형 클러스터링에 비해 핫스팟 문제를 어느 정도 해결할 수 있으므로 전체 네트워크의 에너지 소모량을 줄인다. 본 논문에서는 불균형 클러스터링 모델을 이용하여 계층 기반의 동적 불균형 클러스터링을 제안한다. 이는 라운드별로 최적의 클러스터 수 및 클러스터 헤드 위치를 제공함으로써 전체 네트워크에 대한 에너지 소모를 균형 있게 하고 또한 네트워크 수명을 연장시킨다. 실험을 통하여 제안된 기법이 이전 클러스터링 기법보다 네트워크 수명이 연장되었음을 보였다.