• Nuclear Engineering and Technology
• /
• v.12 no.2
• /
• pp.111-120
• /
• 1980

Nuclear physics parameters of the Wolsung CANDU-PHW reactor are computed by use of the PHWCELL computer code that is an improved version of LATREP. The PHWCELL code mainly computes cell parameters of heavy water moderated reactors, and modeling scheme of heavy water reactor cell calculations has been developed with the PHWCELL computer code. The reactor operating conditions considered in the study are cold zero power (CZP) and hot full power (HFP) with equilibrium poison. The cell parameters are also computed as a function of fuel burnup and the numerical results are compared with the results in PSR of the Wolsung unit and in the previous study.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.109-113
• /
• 2011

Hot air flow simulations of the wet station dryer module for the solar cell cleaning were conducted. Air incident angles such as to the substrates ($45^{\circ}$), to the bottom ($90^{\circ}$), and to the wall ($135^{\circ}$) were considered. Based on the simulated velocity and temperature profiles, appropriate incident angle was proposed, and it was well matched to experimental results. Additionally, uniform and non-uniform air hole sizes of the tube were compared for the uniform air flow distribution through the batch.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.1-11
• /
• 2004

The hot cell facility for research activities related to the lithium reduction of spent fuel, which is designed to permit safe handling of source materials with radioactivity levels up to 1,385 TBq, is planned to be built. To meet this goal, the facility is designed to keep gamma and neutron radiation lower than the recommended dose-rate in normally occupied areas. The calculations peformed with QAD-CGGP and MCNP-4C are used to evaluate the proposed engineering design concepts that would provide acceptable dose-rates during a normal operation in hot cell facility. The maximum effective gamma dose-rates on the surfaces of the facility at operation area and at service area calculated by QAD-CGGP are estimated to be $2.10{\times}10^{-3}, 2.97{\times}10^{-3} and 1.01{\times}10{-1}$ mSv/h, respectively. And those calculated by MCNP-4C are $1.60{\times}10^{-3}, 2.99{\times}10^{-3} and 7.88{\times}10^{-2}$ mSv/h, respectively, The dose-rates contributed by neutrons are one order of magnitude less than that of gamma sources. Therefore, it is confirmed that the radiological design for hot cell facility satisfies the Korean criterion of 0.01 mSv/h for the operation area and 0.15 mSv/h for the service (maintenance) area.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.510-517
• /
• 2004

A fine hot-wire is used both as a heating element and a temperature sensor in transient hot-wire method. The traditional sensor system is unnecessarily big so that it takes large fluid volume to measure the thermal conductivity. To dramatically reduce this fluid volume, a new sensor fabrication and a data processing method are proposed in this article. Contrast to the conventional and most popular two wire sensor, the new sensor system is made up of divided multiple long and short wires. Through validation experiments, it is found that the measured thermal conductivities of the glycerin are exactly same each other between the conventional and proposed new method. Also some technical considerations in arranging the multiple wires are briefly discussed.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.210-215
• /
• 2003

A fine hot-wire is used both as a heating element and a temperature sensor in transient hot-wire method. The traditional sensor system is unnecessarily big so that it takes large fluid volume to measure the thermal conductivity. To dramatically reduce this fluid volume, a new sensor fabrication and a data processing method are proposed in this article. Contrast to the conventional and most popular two wire sensor, the new sensor system is made up of divided multiple long and short wires. Through validation experiments, it is found that the measured thermal conductivities of the glycerin are exactly same each other between the conventional and proposed new method. Also some technical considerations in arranging the multiple wires are briefly discussed.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.130-138
• /
• 2011

In this study, we evaluated the protective effects of the hot water extract from red bean (Phaseolus angularis) against oxidative DNA and cell damage induced by hydroxyl radical. The antioxidant activities were evaluated by hydroxyl radical and hydrogen peroxide scavenging assay, and $Fe^{2+}$-chelating assay. Although the extract with hot water didn't scavenge the hydroxyl radical, it removed and chelated hydrogen peroxide and ferrous iron necessary for the induction of hydroxyl radical by 71% and 64% at 200 ${\mu}g/ml$, respectively. Its protective effect on oxidative DNA damage was carried using ${\Psi}$X-174 RF I plasmid DNA comparing the conversion level of supercoiled form of the plasmid DNA into open-circular form and linear form and the expression level of phospho-H2AX in NIH 3T3 cells. In ${\Psi}$X-174 RF I plasmid DNA cleavage assay, it inhibited oxidative DNA damage by 96% at 200 ${\mu}g/ml$. Also, it decreased the expression of phospho-H2AX by 50.1% at 200 ${\mu}g/ml$. Its protective effect against oxidative cell damage was measured by MTT assay and the expression level of p21 protein in NIH 3T3 cells. In MTT assay for the protective effect against the oxidative cell damage, it inhibited the oxidative cell death and the abnormal cell growth induced by hydroxyl radical. Also, it inhibited p21 protein expression by 98% at 200 ${\mu}g/ml$. In conclusion, the results of the present studies indicate that hot water extract from red bean exhibits antioxidant properties and inhibit oxidative DNA damage and the cell death caused by hydroxyl radical.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1183-1189
• /
• 2004

A novel cell count method, which can improve the count efficiency and reduce contamination problem, was presented using micro lattice engraved on culture dish. The micro lattice has feature of $50{\mu}m{\times}50{\mu}m$ rectangular shape, $2{\mu}m$ line width, and $2{\mu}m$ depth in $3mm{\times}3mm$ area. In this paper, nickel mold was fabricated with thickness of 3mm and diameter of 80 mm, and transcription of the micro lattice on a polystyrene cell culture dish was performed by hot embossing at $200\;^{\circ}C$. The tedious and error-prone harvest/load processes of conventional cell counts with a hemocytometer could be omitted, and these advantages became magnified during periodical counts involving long-term cultures. SupT1 cells and HeLa cells were cultivated with the dish for 7 days in $CO_2$ incubator and counted as $371.84/mm^2$ and $123.36/mm^2$, respectively, during the cultivation without harmful effects on the cells.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.5
• /
• pp.384-389
• /
• 2009

KEPRI (Korea Electric Power Research Institute) has studied planar type solid oxide fuel cell (SOFC) stacks using anode-supported cells and kW class co-generation systems for residential power generation. In this work, a 1 kW SOFC system consisted of a hot box part, a cold BOP (balance of plant) part, and a hot water reservoir. The hot box part contained a SOFC stack made up of 48 cells, a fuel reformer, a catalytic combustor, and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation in that system. A cold BOP part was composed of blowers, pumps, a water trap, and system control units. When the 1 kW SOFC stack was tested using hydrogen at $750^{\circ}C$, the stack power was about $1.2\;kW_e$ at 30 A and $1.6\;kW_e$ at 50 A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about $1.3\;kW_e$ with hydrogen and $1.2\;kW_e$ with city gas respectively. The system also recuperated heat of about $1.1\;kW_{th}$ by making hot water.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.217-226
• /
• 2006

The structural and contamination characteristics of hot cells at KAERI were investigated. The SEM results showed that the size of the hot particulate on the inner surface of the hot cell ranged from 0.2 to $10{\mu}m$. It was found that an inlet flow rate of 15 m/sec was suitable for this developed cyclone with a 49 mm optimum vortex finder length. The results showed that the collection efficiency was about 85% for $3{\mu}m$ particles. The collection efficiency didn't show a sharp increase when the inlet flow rate was faster than 15m/sec. When the temperature of the inlet flow gas was increased, the collection efficiency of the cyclone was slightly decreased. The larger the vortex finder length was, the higher the pressure drop in the cyclone was. The cut size diameter decreased with an increment of the Reynolds number. It was established that the flow in the cyclone was a turbulent flow on the basis of the Reynolds number and this turbulent flow caused a pressure drop in the cyclone. $Stk^{1/2}_{50}$ decreased with increasing values of the Reynolds number and it gradually approached a constant value at a higher value of the Reynolds number Namely, $Stk^{1/2}_{50}$ approached approximately 0.045 between 6000 and 8000 of the Reynolds number.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.324-330
• /
• 2018

The objective of this study was to evaluate antioxidant effect and tyrosinase inhibitory activity of white beech mushroom (Hypsizygus marmoreus) extracts. The white beech mushroom was extracted into hot water and methanol. Total polyphenol content was highest in the hot water extract ($8.4{\pm}3.27mg\;GAE/g$) compared to the methanol extract ($7.3{\pm}2.85mg\;GAE/g$). The flavonoids contents in hot water and methanol extracts were $3.8{\pm}3.81ug/mg$ and $2.5{\pm}1.95ug/mg$, respectively. The tyrosinase inhibitory activity of extract was increased in a dose dependent manner and tyrosinase inhibitory activity of extract (hot water extract, 69.72%; methanol extract, 52.67% at 40 mg/ml) was lower than those of positive control 2% arbutin (96%). The DPPH radical scavenging activity of the hot water and methanol extract was 80% and 74%, respectively. Hot water extract ($63.34{\pm}1.00uM\;TE/g$) were more effective in ORAC (oxygen radical absorbance capacity) value than methanol extract ($46.33{\pm}0.48uM\;TE/g$). The toxicity of hot water and methanol extracts was investigated using WST-1 (4-[3-(4-iodophenyl)-2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulphonate) assay on the B16BL6 melanoma cells.