• Korean Journal of Plant Resources
• /
• v.32 no.5
• /
• pp.415-422
• /
• 2019

Rhodosporidium toruloides has been known as an in vitro model of fat metabolism. The purpose of this study is to identify the triglyceride inhibitory effects of hot water extracts from beetroot using R. toruloides. The triglyceride content of oleaginous yeast cultured from YPD culture medium were regulated by treatment of beet root hot water and ethanol extract, respectively. In addition, the number of cells in the oleaginous yeast was 10.48, 8.46, 12.40, 12.80 and $8.24{\times}10^3cell/mL$. The treatment of hot water extract of beet root increased total lipid content of oleaginous yeast in dose dependently. Moreover, the triglyceride content of oleaginous yeast was decreased by hot water extract of beet root extract, respectively. The fat droplet in the oleaginous yeast decreased according to the concentration of hot water extracts from beetroot. The ratio of increase in the number of cells in the oleaginous yeast were increased dose-dependently by treatment of hot water extract from beetroot compared with control group. The free fatty acid and total carotenoid contents were increased concentration-dependently by treatment of hot water extracts from beetroot. These study results indicate that hot water extracts from beetroot has a triglyceride inhibitory effects.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.305-310
• /
• 2016

Background: Given the association between drinking hot tea and the risk of esophageal squamous cell carcinoma, this study was designed to determine the effectiveness of an educational campaign based on the Theory of Planned Behavior (TPB) in reducing hot tea consumption among a sample of Iranian female students. Materials and Methods: In this quasi-experimental study, 130 primary-school female students in Salas Babajani, Kermanshah, Iran were randomly selected. A two-month campaign based on TPB constructs was developed and conducted for the intervention group. Combined mass media approaches (such as posters, pamphlet, and brochure) with small group and individual activities were used to transfer the campaign messages. Also, five 40-minute instructional sessions for the students and one session for their parents and teachers were held. The hot tea consumption, attitude, subjective norms, perceived behavioral control and no intention to drink hot tea were variables which were measured at baseline and again after 4 weeks. Results: There was a significant improvement in the perceived behavioral control and intention to drink no hot tea variables in the intervention group as compared to the control group following the campaign. In addition, significant reductions were found for the hot tea consumption and favorable attitude toward drinking hot tea in the intervention group as compared to the control group. Conclusions: Conducting educational campaigns based on TPB variables may reduce hot tea consumption among Iranian students.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.161-170
• /
• 2006

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered on the inner surface of hot cell and surface of equipment in hot cell. It was necessary to develop a filtration equipment to reuse the PFC waste solution generated on PFC decontamination due to the high cost of PFC solution and for minimization of the volume of second waste solution. The filtration equipment was developed to remove hot particulate in PFC waste solution. It was made suitable size and weight in consideration of hot cell gate and crane. And it has wheels for easy movement. Flux of the filtration equipment decreased with particulate concentration increase. It consists of pre-filter($1.4{\mu}m$) and final-filter($0.2{\mu}m$) for protection of the flux decrease along filtration time. It treatment capacity of waste solution is 0.2 L/min.

• Journal of Applied Biological Chemistry
• /
• v.55 no.2
• /
• pp.117-121
• /
• 2012

Biological activities of the hot water and ethanol extracts from Opuntia humifusa cladodes were investigated. 1,1-diphenyl-2-picryl hadrazyl (DPPH) electron donating ability of hot water and ethanol extracts was 79.07 and 82.54%, respectively. Hot water extract generally showed better cytotoxic activity than ethanol extract against each cell line. HeLa and AGS cell lines treated with hot water extract had more than 50% cytotoxic activities. Based on the antimicrobial activities against four microbial strains, both extracts inhibited growth of Staphylococcus aureus KCCM 11593, whereas affected cell growth of three other microorganisms, Escherichia coli (KCCM 11234), Pseudomonas aeruginosa (ATCC 27853), and Salmonella typhimurium (ATCC 11862), in proportion to the concentration of extracts. The inflammatory activities against hot water extract (34.31%) showed higher than that of ethanol extract (25.59%). The effect of extracts on 3T3-L1 preadipocytes differentiation showed that differentiation of treated group with 80 and 100 ${\mu}g/mL$ of hot and ethanol extracts were increased more than treated group with isobutyl methyl xanthine (IBMX) + dexamethasone. These results indicate that the O. humifusa cladodes extracts can be used as a functional material due to their effective biological activities.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.232-237
• /
• 2008

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. The extraction of hot air from the space will enhance the performance of BIPV systems. The solar collector utilizing these two aspects is called PV/T(photovoltaic/thermal) solar collector. This research is about the development of solar roof system with PV/T collector to apply into buildings. A test cell experiment was performed with the PVT roof installed: It found that the hot air supply from the PVT air collector contributed to increase the heating efficiency by 2 times and the electrical efficiency by about 8%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1034-1037
• /
• 2003

Microcrystalline silicon(c-Si:H) thin-film solar cells are prepared with intrinsic Si-layer by hot wire CVD. The operating parameters of solar cells are strongly affected by the filament temperature ($T_f$) during intrinsic layer. Jsc and efficiency abruptly decreases with elevated $T_f$ to $1400^{\circ}C$. This deterioration of solar cell parameters are resulted from increase of crystalline volume fraction and corresponding defect density at high $T_f$. The heater temperature ($T_h$) are also critical parameter that controls device operations. Solar cells prepared at low $T_h$ ($<200^{\circ}C$) shows a similar operating properties with devices prepared at high $T_f$, i.e. low Jsc, Voc and efficiency. The origins for this result, however, are different with that of inferior device performances at high $T_f$. In addition the phase transition of the silicon films occurs at different silane concentration (SC) by varying filament temperature, by which highest efficiency with SC varies with $T_f$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.80-83
• /
• 2003

In this paper, the programming characteristics of the multi-bit devices based on SONOS structure are investigated. Our devices have been fabricated by $0.35\;{\mu}m$ complementary metal-oxide-semiconductor (CMOS) process with LOCOS isolation. In order to achieve the two-bits per cell operation, charges must be locally trapped in the nitride layer above the channel near the junction. Channel hot electron (CHE) injection for programming can operate in multi-bit using localized trap in nitride film. CHE injection in our devices is achieved with the single power supply of 5 V. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve were investigated. The multi-bit operation which stores two-bit per cell is investigated with a reverse read scheme. Also, hot hole injection for fast erasing is used. Due to the ultra-thin gate dielectrics, our results show many advantages which are simpler process, better scalability and lower programming voltage compared to any other two-bit storage flash memory. This fabricated structure and programming characteristics are shown to be the most promising for the multi-bit flash memory.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.21-24
• /
• 2008

We have developed a $kW_e$ class liquid fuel based solid oxide fuel cell (SOFC) system. Our final target is to develop the 1 $kW_e$ diesel based SOFC system for residential power generator(RPG). In this study, we present the conceptual design of SOFC system. System is composed of hot-box and cold-box. Planar typed SOFC stack, heat exchanger, combustor for stack tail gas, and fuel processor, such as fuel reformer and desulfurizer, are contained in the hot-box. And several balance of plants(BOP), such as fuel suppliers and controller, are contained in the cold-box. Before the SOFC system fabrication, we have already operated the selfsustaining fuel processor, and heat exchange of all heat-related components is simulated using ASPEN HYSYS, because heat maintenance and management in hot-box are important for stable operation of SOFC system. The self-sustained fuel processor was successfully operated for about 250 hours, and heat exchange is enough to operate the SOFC system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.5
• /
• pp.405-411
• /
• 2010

A 5kW class SOFC cogeneration system consisted of a hot box part, a cold BOP (balance of plant) part, and a hot water reservoir. The hot box part contained a stack, a fuel reformer, a catalytic combustor, and heat exchangers. A cold BOP part was composed of blowers, pumps, a water trap, and system control units. A 5kW stack was designed to integrate 2 sub-modules. In this paper, the 5kW class SOFC system was operated using 2 short stacks connected in parallel to test the sub-module and the system. A short stack had 15 cells with $15{\times}15 cm^2$ area. When a natural gas was used, the total power was about 1.38 kW at 120A. Because the sub-modules were connected in parallel and current was loaded using a DC load, voltages of sub-modules were same and the currents were distributed according to the resistance of sub-modules. The voltage of the first stack was 11.46 V at 61A and the voltage of the second stack was 11.49V at 59A.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.149-162
• /
• 2008

Objectives : The purpose of this study is to investigate the effects of hot pepper extract and capsaicin on the adipogenesis in 3T3-L1 cells, lipolysis in rat epididymal adipocytes and histological changes in porcine adipose tissue. Methods : Inhibiton of preadipocyte differentiation and/or stimulation of lipolysis play important roles in reducing obesity. 3T3-L1 preadipocytes were differentiated with adipogenic reagents by incubating for 3 days in the absence or presence of hot pepper extract or capsaicin ranging from 0.01 to $1mg/m{\ell}$. The effects of hot pepper extract and capsaicin on adipogenesis were examined by measuring GPDH activity and by Oil Red O staining. Mature adipocytes from rat epididymal fat pad was incubated with hot pepper extract or capsaicin ranging from 0.01 to $1mg/m{\ell}$ for 3 hrs. The effects of hot pepper extract and capsaicin on lipolysis were examined by measuring free glycerol released. Fat tissue from pig skin was injected with hot pepper extract or capsaicinCFP ranging from 0.1 to $10mg/m{\ell}$ to examine the effects of hot pepper extract and capsaicin on histological changes under light microscopy. Results : The following results were obtained from present study on adipogenesis of preadipocytes, lipolysis of adipocytes and histological changes in fat tissue. 1. Hot pepper extract and capsaicin inhibited adipogenic differentiation at the concentration of 0.1 and $0.01mg/m{\ell}$, respectively, indicating that capsaicin was more effective in inhibiting adipogenesis than hot pepper extract. 2. Hot pepper extract and capsaicin decreased the activity of glycerol-3-phosphate dehydrogenase(GPDH) at the concentration of 0.1 and $0.01mg/m{\ell}$, respectively, indicating that capsaicin was more effective in inhibiting adipogenic differentiation than hot pepper extract. 3. Hot pepper extract and capsaicin increased glycerol release at the concentration of $0.1mg/m{\ell}$. There was no difference in lipolytic activity between hot pepper extract and capsaicin at the corresponding concentration. 4. Hot pepper extract and capsaicin caused shrinkage of fat cells, resulting in cell death at the concentration of $1.0mg/m{\ell}$, although capsaicin exerted this action over wide area than hot pepper extract. Conclusions : These results suggest that hot pepper extract and capsaicin efficiently inhibited adipogenesis, increased lipolysis of adipocytes and caused to shrink fat cells. Future studies are needed to make use of hot pepper extract pharmacopuncture for the treatment of obesity.