• Journal of Mechanical Science and Technology
• /
• v.14 no.11
• /
• pp.1305-1318
• /
• 2000

The local wall shear stress in transitional boundary layer was estimated from the near-wall mean velocity data using the principle of Computational Preston Tube Method(CPM). The previous DNS and experimental databases of transitional boundary layers were used to demonstrate the accuracy of the method and to provide the applicable range of wall unit y(sup)+. The skin friction coefficients predicted by the CPM agreed well with those from previous studies. To reexamine the applicability of CPM, near-wall hot-wire measurement were conducted in developing transitional boundary layers on a flat plate with different freestream turbulence intensities. The intermittency profiles across the transitional boundary layers were reasonably obtained from the conditional sampling technique. An empirical correlation between the representative intermittency near the wall and free parameter K$_1$of the extended wall function of CPM has been newly proposed using the present and other experimental data. The CPM has been verified as a useful tool to measure the wall shear stress in transitional boundary layer with reasonable accuracy.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1613-1616
• /
• 2007

A microgripper using thermal actuator and SU-8 polymer was designed and fabricated to manipulate cells and microparts. A chip size of a microgripper was 3 mm ${\times}$ 5 mm. The thermally actuated microgripper consisted of two couples of hot and cold arm actuators. The high thermal expansion coefficient, 52 $ppm/^{\circ}C$, of SU-8 compared to silicon and metals, allows the actuation of the microgripper. Thickness and width of SU-8 as an end-effector were 26 ${\mu}m$ and 80 ${\mu}m$, respectively. Initial gap between left jaw and right jaw was 120 ${\mu}m$. The ANSYS program as FEM tool was introduced to analyze the thermal distribution and displacement induced by thermal actuators. $XeF_2$ gas was used for isotropic silicon dry etching process to release SU-8 end-effector. Mechanical displacements of the fabricated microgripper were measured by optical microscopy in the range of input voltage from 0 V to 2.5 V. The maximum displacement between two jaws of a microgripper Type OG 1_1 was 22.4 ${\mu}m$ at 2.5 V.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.98-105
• /
• 2009

In this paper, new data centric storage that is dynamically adapted to the change of work load is proposed. The proposed data centric storage distributes the load of hot spot area by using multilevel grid technique. Also, the proposed method is able to use existing routing protocol such as GPSR (Greedy Perimeter Stateless Routing) with small changes. Through simulation the proposed method enhances the lifetime of sensor networks over one of the state-of-the-art data centric storages. We implement the proposed method based on a operating system for sensor networks, and evaluate the performance through running based on a simulation tool.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.1
• /
• pp.65-68
• /
• 2007

Objective : A new point of view on the chronic back pain proposed which is, named neuropathic back pain[NBP]. Some proposed a certain pain scale as an useful diagnostic tool. Before scientific verification, some doctors prescribed a new anticonvulsant for the NBP. We investigated diagnostic tools for NBP by a review of the literature. Methods : A comprehensive computer search of the English literature concerning neuropathic low back pain was performed using the key words such as neuropathic back pain and diagnosis in the PubMed. Results : In 1998, the term NBP was first used in a patient with lung cancer. In the English literature, there were two diagnostic methods for the NBP, Neuropathic pain scale[NPS] and a pharmacological test. NPS is a pain questionnaire, which depends on the patients' subjective reports on the given questions, such as 'how hot is your pain feel'. By the pharmacological test, NBP was defined as 50% or more decrease of pain on intravenous lidocaine and on local anesthetic epidurally. It also depends on the patients' subjective response to the therapy. Conclusion : There were still no reliable objective diagnostic criteria for the NBP. It seems to be better to reserve the new anticonvulsants for the NBP till scientific approval.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.636-640
• /
• 2011

Film cooling technique has been applied to effectively reduce thermal load on liquid rocket combustion chambers by direct injection of a portion of propellant, which flows through the regeneratively cooling channels, into the chamber wall. This study developed a comprehensive model to quantitatively predict the effects of kerosene film cooling on propulsive performance and wall cooling at supercritical pressure conditions, and assessed the predictive capability against hot-firing tests of an actual combustor. The present model is expected to be utilized as a design and analysis tool to meet the conflicting requirements in terms of performance, cooling, pressure loss and weight.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.52-59
• /
• 2014

The effect of ceramic thermal barrier coating thickness on the cooling performance of a liquid-propellant rocket engine combustor has been investigated through combustion/cooling performance analysis whose results verified against measured data from hot-firing tests. Also have been confirmed the effects of film cooling amount near the face plate on the coolant temperature and on the thermal barrier coating surface temperature. Some important points to be considered for designing cooling schemes for regeneratively cooled rocket engine combustor have been drawn and reviewed from present study and further verification of the analysis tool should be performed in the future.

• Steel and Composite Structures
• /
• v.13 no.4
• /
• pp.343-365
• /
• 2012

Steel suspension members subjected to tension and bending offer an economical and efficient alternative for many structural problems. This paper is concerned with the elastic and elastic-plastic behaviour of suspension members with bending stiffness subjected to vertical point and uniformly distributed loads. An experimental study is described which focuses on the response of three suspension members with various T-shaped steel hot rolled sections and geometric configurations. The tests enable direct assessment of the influence of a key parameter such as the sag-to-span ratio on the response of suspension members. Detailed nonlinear finite-element models are generated to provide a tool for theoretical analyses and to facilitate further understanding of the behaviour. Results demonstrate that experimentally obtained responses can generally be closely predicted numerically because there are relatively good agreements between finite element and tests results. The results and observations of subsequent numerical parametric studies offer an insight into the key factors that govern the behaviour of suspension members with bending stiffness in the elastic-plastic range.

• Journal of Ginseng Research
• /
• v.37 no.1
• /
• pp.30-36
• /
• 2013

The aim of this review was to assess the effectiveness of ginseng as a treatment option for managing menopause symptoms. We searched the literature using ll databases from their inception to 26 September 2012 and included all randomised clinical trials (RCTs) that compared any type of ginseng to a placebo controls in postmenopausal women. The methodological quality of all studies was assessed using a Cochrane risk of bias tool. Four RCTs met our inclusion criteria. Most RCTs had high risk of bias. One RCT showed that Korean red ginseng (KRG) significantly improved sexual arousal and global health compared with placebo. Another RCT reported the superiority of KRG over placebo for treating menopause symptoms on Kupperman's index and menopausal rating score. The third RCT failed to show a significant effect of KRG on hot flash frequency compared to placebo. The fourth RCT found beneficial effects of ginseng compared to placebo on depression and well-being. In conclusion, the evidence on ginseng as an effective treatment for managing menopause symptoms is limited. Most of the RCTs are burdened with a high risk of bias. Thus firm conclusions cannot be drawn. Rigorous studies seem warranted.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.86.2-86.2
• /
• 2014

We present a new ray-tracing code, "Odyssey", for the Kerr spacetime accelerated by the Graphics Processing Unit (GPU). Taking advantage of the ability of nVidia graphic cards to evaluate trajectories of a large amount of photon simultaneously, the code is two orders of magnitude as fast as the previous CPU-based code corresponding to the speed of few nanoseconds per photon per time step. In the light of the Graphic User Interface (GUI) powered by the GPU-enhanced 2D/3D displaying technique, DirectX, it is feasible for users to manipulate diverse results such as rotating and zooming in/out the trajectories of photon instantly near the black hole. Thus the Odyssey can serve as a tool not only for scientific but also for the educational purpose. We discuss possible applications in detail in light of several results such as the shape of the silhouette of a black hole, the shape of a hot spot orbiting a black hole, and 3D photon trajectories.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.77-84
• /
• 2015

Purpose: In 2008, As the green growth policy was presented, Green Building is made any effort to propagation. In this paper, the respective technologies that are able to considerably reduce the energy demands for heating, cooling, hot-water, lighting and ventilation among the variety of technologies were selected. Method: Design factors such as (1) External insulation, (2) Triple glazing window, (3) LED lighting, (4) External venetian blind, (5) Geothermal and (6) Heat recovery ventilator were derived. In addition, energy saving effects in terms of energy demand, energy consumption and energy cost were investigated using EnergyPlus, building energy analysis tool. Result : The results were as follows. (1) It can be seen that high insulated triple glazing window, heat recovery ventilator and external insulation technology is excellent for energy demand. (2) Unlike energy demand, saving effect of energy consumption and energy cost was shown in order of Geothermal > Triple Window > Heat recovery Ventilation> Insulation> LED Lighting > EVB Blind.