• 한국해양공학회지
• /
• 제29권1호
• /
• pp.45-55
• /
• 2015

Because of the high stress concentration near the toe of a welded joint, the calculation of local stress using the finite element method which is relevant to the fatigue strength of the weld toe crack, is a challenging task. This is mainly caused by the sensitivity of finite element analysis, which usually occurs near the area of a dramatically changing stress field. This paper presents a novel numerical method through which a less mesh-sensitive local stress calculation can be achieved based on the 3D solid finite element, strictly sticking to the original definition of hot spot stress. In order to achieve the goal, a traction stress, defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force-equivalent or work-equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. In the force-equivalent approach, the traction stress on the imaginary cut plane was calculated using the simple force and moment equilibrium, whereas the equivalence of the work done by both the nodal forces and linearized traction stress was employed in the work-equivalent approach. In order to confirm the validity of the proposed method, five typical welded joints widely used in ships and offshore structures were analyzed using five different solid element types and four different mesh sizes. Finally, the performance of the proposed method was compared with that of the traditionally used surface stress extrapolation method. It turned out that the sensitivity of the hot spot stress for the analyzed typical welded joints obtained from the proposed method outperformed the traditional extrapolation method by far.

• 한국전자파학회논문지
• /
• 제8권6호
• /
• pp.665-680
• /
• 1997

본 논문에서는 350 MHz와 900 MHz 평면파에 노출된 다양한 모델의 인체 두부 내 비흡수율(specific abs sorption rate, SAR)의 분포를 해석하였다. 해석 방법은 유한차분시간영역(finite-difference time-domain, FDTD) 방법이며, 인체 두부 모델로서 균질 매질의 구형모델, 균질의 실질적인 형태를 갖는 모텔 그리고 실질적인 형태를 갖는 비균질 모델이 사용된다. 입사 평면파의 편파는 인체 길이방향과 일치하며, 진행방향은 뒤에서 암으로, 그리고 앞에서 뒤로 향하는 두 가지 경우를 다룬다. 얻어진 연구결과는 다음과 같다. 1) 세 가지 모델의 평균 SAR은 비슷하나 국부 SAR은 큰 차이가 있다. 2) 주파수가 900 MHz보다 두부의 공진이 일어나는 대역인 350 MHz에서 복사전력이 더 깊이 침투한다. 3) 후방입사 평변파의 경우에는 두부가 아닌 목 부근에서 "hot spot"이 일어난다. 4) 전방입사 평면파의 경우에는 900 MHz에서는 코, 350 MHz의 경우에는 입술 위와 턱 부분에 "hot spot"이 나타난다.

• 한국농공학회논문집
• /
• 제62권6호
• /
• pp.21-31
• /
• 2020

This study analyzed the spatio-temporal change pattern of greenhouse areas for Sangnam-myeon and Samrangjin-eup of Miryang-si in Gyeongnam, which is one of major greenhouse area. First, in order to overcome the lack of statistical data of the distribution of greenhouses, aerial and satellite images were interpreted from 1987 to 2018, and the spatial distribution of the greenhouse parcels which has continuously increased was mapped based on the digital cadastral map. Next, through the emerging hot spot tool in ArcGIS Desktop, the spatio-temporal change in transition from open-field to greenhouse cultivation was classified into 9 clusters. About 67.7% of the target area was categorized as a hot spot, and the pattern of New hot spot, which were recently converted to greenhouse parcels, covered about 34.1%. While, about 11.3% of parcels were expected to keep the existing open-field cultivation practice for a while. Overall, the greenhouse parcels have been densely developed along a river and were lately expanding even to the far neighbor. It implied that, in the future, the competition of water intake among farms would be more serious and the environmental responsibility in consideration of water quality as well as quantity would be getting strengthened due to increasing pollution loads and river intake.

• 한국환경생태학회지
• /
• 제35권6호
• /
• pp.659-668
• /
• 2021

본 연구는 부산광역시를 대상으로 열환경을 개선하기 위한 바람길 관리 방안 제안을 목적으로 한다. 이를 위해, Landsat-7 위성 열영상 자료와 공간통계 분석을 실시하여 부산광역시의 Hot spot과 Cool spot 지역 특성을 파악하였으며, WRF 기상모의를 통해 주요 바람길을 분석하였다. 그 결과, Hot spot 지역 중 열환경 개선이 요구되는 지역은 부산진구, 동래구, 연제구와 사상구 공업지역, 대규모 시설지역에는 부산항 부두로 나타났으며 주요 바람길에는 금정산~백양산~구덕산 계곡부로서 확인되었다. 이를 바탕으로 바람길 관리 전략을 제시하면 다음과 같다. 공업시설과 부산항 일대는 대기 온도 상승 요인으로서 주변 지역의 열환경을 악화시키므로 시설의 온도저감 및 바람길을 고려한 도시·건축계획이 요구된다. 바람길 관리가 필요한 지역으로 만덕동, 사직동 일대 산림에 대한 추가적인 훼손이 일어나지 않도록 하여야 하며, 산림과 인접한 지역의 대규모 고층아파트는 산림에서 생성된 차고 신선한 공기의 흐름을 방해하므로 금정산과 접해있는 제3종 일반주거지역의 신규·재개발에 따른 고층아파트 단지 조성은 지양해야 한다. 본 연구 결과는 부산광역시의 기후변화에 대응한 도시계획 및 환경계획수립 시 기초자료로 활용할 수 있을 것으로 기대한다.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.6-11
• /
• 2013

In this paper, the temperature characteristics of mold transformer for the distribution power system have been analyzed by using computational fluid dynamics(CFD). The model has been modeled by coil, cores, insulating materials and frames about 3MVA grade mold transformer and analyzed the temperature distribution of the structure with a heat fluid. The fluid, which is incompressible ideal gas, is analyzed as a turbulent flow phenomenon on the assumption that it is natural cooling of transformer cooling system. Through this study, by examining the temperature distribution and hot-spot of the structure field of the mold transformer, cooling design and temperature distribution information, which are demanded for designing are estimated.

• 한국주조공학회지
• /
• 제5권2호
• /
• pp.109-117
• /
• 1985

A two dimensional analysis of the solidification phenomena has been simulated by IAD (Implicit Alternating Direction)method for L-shaped castings with external chills. The effect of chills has been studied with the variation of chill size, shape, and their materials, and also with the variation of the pouring temperature. Three kinds of cross-sectional shapes of chills such as triangle, square, and L-shape were chosen, and graphite, cast iron, and copper for their materials. It has been shown by the computation that the hot spot at the junction of L-shaped castings can not be removed by external chills, and that the distance between the inner corner and the hot spot on the line of symmetry, as well as the solidification time of castings depend only on VHC (Volumetric Heat Capacity).

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.327-332
• /
• 2014

In this paper, the temperature distribution according to the property change of the insulating oil of the power transformer and max temperature were predicted through the ductility interpretation which heat-flow is coupled. By using CFD (Computation Fluid Dynamics) for the interpretation, the temperature distribution of 154kV the class single phase power transformer was predicted. The power loss causing the temperature rise of the transformer was changed to the heat source and we used as the input value for the heat-flow analysis. The temperature distribution was predicted according to the change of the density, specific heat, thermal conductivity and viscosity, that is the ingredient having an effect on the temperature rise of the transformer oil. The mineral oil of 4 kinds used in domestic and international based on the interpreted result was selected and the temperature distribution according to each load and Hot Spot temperature was predicted.

• 보건행정학회지
• /
• 제25권4호
• /
• pp.285-294
• /
• 2015

Background: Suicide is one of important health problems in Korea. Previous studies showed factors associated with suicide in individual levels. However, suicide was influenced by society that individuals belong to, so it was required to analyze suicide in local levels. The purpose of this study was to analyze the regional disparities of suicide mortality by gender and the association between local characteristics and suicide mortality. Methods: This study included 229 city county district administrative districts in Korea. Age- and sex-standardized suicide mortality and age-standardized suicide mortality (male/female) were used as dependent variables. City county district types, socio-demographics (number of divorces per 1,000 population, number of marriages per 1,000 population, and single households), financial variable (financial independence), welfare variable (welfare budget), and health behavior/status (perceived health status scores and EuroQol-5 dimension [EQ-5D]) were used to represent the local characteristics. We used hot-spot analysis to identify the spatial patterns of suicide mortality and negative binomial regression analysis to examine factors affecting suicide mortality. Results: There were differences in distribution of suicide mortality and hot-spot regions of suicide mortality by gender. Negative binomial regression analysis provided that city county district types (city), number of divorces per 1,000 population, financial independence, and EQ-5D had significant influences on the age- and sex-standardized suicide mortality per 100,000. Factor influencing suicide mortality was the number of divorces per 1,000 population in both male and female. Conclusion: Study results provided evidences that suicide mortality among regions was differed by gender. Health policy makers will need to consider gender and local characteristics when making policies for suicides.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.93-106
• /
• 2001

선체 구조에서 피로 손상을 받기 쉬운 용접 부위인 T형 이음부(T-joint) 및 호퍼 너클 이음부(hopper knuckle joint) 모델의 피로실험 및 선형탄성 파괴역학을 이용한 피로균열 진전해석을 수행하였다. 집중 응력(hot spot stress)을 적용하여 정의된 균열 개시수명(균열 깊이 1mm)을 기준으로 하는 통합된 S-N선도를 작성하였으며, 잔류응력을 고려한 피로균열 진전해석을 통하여 피로균열 진전수명을 정확히 예측할 수 있었다. 또한, 임의의 형상을 가지는 용접 이음부(weld joint)의 피로균열 진전수명에 대한 정량화의 가능성을 확인하였다.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.383-391
• /
• 2011

최근 차체 경량화를 위한 여러 가지 방법 가운데 고온에서 가공하여 성형성을 확보하고, 이후 열처리를 통하여 고강도를 가질 수 있는 프레스 열간 성형 및 핫스탬핑 기술이 각광을 받고 있으며, 이에 따라 핫스탬핑용 재료인 보론 첨가 강판의 수요도 늘어나고 있는 추세이다. 본 연구에서는 핫스탬핑용보론 첨가 강판의 우수한 경화능을 보이는 임계 최적 열처리 조건을 파악하고자, Al+Si 코팅이 된 보론강판을 각기 다른 온도로 열처리하여 수냉 조건에 따른 기계적 특성 및 조직을 관찰하였다. 또한, 이 결과를 토대로 선별된 기계적 특성이 우수한 보론강 시험편과 일반 냉연 강판인 SPRC 340과 SPRC 590 2종류의 상대재를 활용하여 특정 점용접 조건에서 용접을 실시하고, 보론강 및 상대재의 기계적 특성 변화에 따른 용접 후의 기계적 특성 및 조직, 그리고 코팅층 유무에 따른 특성 변화를 연구하였다.