• Korean Chemical Engineering Research
• /
• 제58권4호
• /
• pp.581-587
• /
• 2020

본 연구에서는 기존의 2,3-Butanediol (2,3-BDO) 탈수 반응시스템의 문제점을 해결하기 위해 새로운 반응 시스템이 제안되었다. 대기압 근처에서 2,3-BDO 반응물을 반응온도 360 ℃ 까지 올리기 위해서, 상용공정에서 일반적으로 사용되는 용광로를 사용하게 되면 반응 시스템이 적절히 작동할 수 없다는 것이 확인되었다. 그것은 2,3-BDO 올리고머로 고려되는 물질 때문이다. 그것은 용광로 튜브 안의 막힘, 폭발과 같은 안전 문제 뿐 아니라 반응 시스템의 유지보수의 어려운 문제점을 일으킬 수 있다. 그러한 문제점을 해결하기 위한 방법은 용광로를 대신해 감압운전 하에서 고압스팀을 사용하는 열교환기를 사용해서 반응물의 온도를 낮추고 반응 온도를 낮추는 것이다. 반응 속도론을 사용하여, 반응기의 성능이 감압운전과 더 낮은 온도, 330 ℃에서 크게 다르지 않다는 것을 보였다. 이 결과는 왜 새로운 반응 시스템이 제안되었는지를 설명한다.

• 한국통신학회논문지
• /
• 제31권2A호
• /
• pp.128-137
• /
• 2006

본 논문에서는 이종무선 네트워크 환경에서 다중모드 단말의 네트워크 간 핸드오버를 위한 무선 네트워크 탐지기법을 제안한다. 제안하는 무선 네트워크 탐지기법은 중첩 무선 네트워크 환경에서 매크로 셀에 접속되어 있는 단말이 핫스팟(hot-spot) 무선랜 모뎀을 활성화하지 않고도 핫스팟 서비스 가능 여부를 탐지할 수 있도록 참조 정보로 사용되는 핫스팟 지역 맵을 구축한다. 이를 위해 LCS 서버는 위치에 따른 전파환경 정보를 수집하여 핫스팟의 실제 서비스 영역과 근사하게 이상적 서비스 영역을 설정하고 그 맵을 단말에게 제공한다. 다중모드 단말은 이를 바탕으로 핫스팟 탐지를 위한 모뎀 활성화를 제어하여 배터리 전원을 효율적으로 사용하면서 신속하고 정확하게 서비스 가능한 무선 네트워크를 인지 할 수 있도록 한다. 본 논문에서는 시뮬레이션을 통하여 제안한 기법과 기존의 기법들의 성능을 비교$\cdot$분석한다.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.792-798
• /
• 2007

촉매 연소는 통상의 연소 방식과는 달리 촉매 표면에서 연료와 산화제의 화학 반응에 의한 연소 방식이다. 따라서 연소 영역 이전에 연료와 공기가 잘 혼합되어야 하며, 균일한 공급이 이루어져야 한다. 만약 불균일한 유동 분포가 발생하게 되면, 국부적인 고온 지역이 발생하게 되고 이는 촉매와 지지체에 손상을 초래하게 된다. 본 연구에서는 촉매 연소기의 혼합 및 유동 균일도를 향상시키기 위해 다공판을 사용하였으며, 다양한 파라메터의 변화에 따른 유동 특성의 변화를 조사하기 위해 수치적인 방법을 사용하였다. 각각의 조건하에서 촉매부의 입구에서 유동의 균일도를 조사하고 평가하였으며, 그 결과 적절히 설계된 다공판을 사용하였을 경우 대부분의 해석 조건에 대해 효과적인 균일도 향상을 나타냄을 확인할 수 있었다.

• 한국환경과학회지
• /
• 제14권1호
• /
• pp.23-32
• /
• 2005

Surface sediments (0$\~$4 cm) were sampled at 40 stations from Ulsan Bay and its adjacent areas of Korea, to evaluate the contamination by sewage-derived organic matters using fecal sterols. Some sterols were quantified by gas chromatography coupled to mass spectrometry (GC/MS). Total concentrations of eight sterols (co­prostanol, cholesterol, cholestanol, epicholestanol, epicoprostanol, ${\beta}-sitosterol,$ brassicasterol, and stigmasterol) in the sediments from Ulsan Bay and its vicinity varied from 929 to 23,444 ng/g dry weight. The most predom­inant sterols were cholesterol and coprostanol, accounting for $33\~72{\%}$ of total sterols. The concentration of coprostanol known as the indicator of human feces ranged from 141 to 8,257 ng/g dry weight. In particular, the coprostanol concentrations in the sediments from Jansaengpo Harbor and Taehwa River exceeded the value of 1,000 ng/g dry weight, suggesting that these areas could be considered as the hot-spot zones by municipal sewage contamination. Some molecular indices and multivariate data analysis were used to assess the origin of these sterols in the sediments. Results showed that the major routes of sewage contamination in Ulsan Bay and its vicinity were the input through Jansaengpo Harbor and Taehwa River.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.757-767
• /
• 2008

차세대 이동 통신망의 발전으로 상용 망과 이 기종 망이 서로 겹쳐진 다중 망 구조가 형성될 것이다. 이러한 여러 망이 겹쳐진 다중 망 구조에서 전체 무선자원의 사용 효율을 높이고 Eb/Io (bit energy-to-interference plus noise density ratio)를 개선하기 위해 이기종망간 혹은 동종망간 상호 연동 기술이 필요하다. 본 논문에서는 이러한 동종망과 이기종망들이 서로 겹쳐져 있는 다중 셀 환경에서 load를 효율적으로 분산시킴으로써 무선 자원의 효율을 높이고 신호의 간섭양을 줄여 사용자의 QoS 보장 및 성능 개선을 위한 soft load balancing algorithm을 제안 및 분석한다. 본 논문에서는 수학적 분석을 통해 효율적인 load sharing을 위한 최적의 LBR (load balancing ratio) 을 구하고 이를 이용하여 각 network에 traffic 양을 할당하여 서비스한다. 그러므로 soft load balancing 알고리듬은 보다 안정적인 데이터 전송을 가능하게 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1168-1171
• /
• 2003

In contrast to a conventional transformer, the flat transformer is made using a number of small ferrite cores. Two cores for transformer and one core for inductor, which composed one module. Many modules can be connected together to form a flat matrix transformer. This structural arrangement eliminates the single hot spot problem in conventional transformers and permits high current density pertains at high frequency. In this study, the ferrite magnetic cores of Mn-Zn system for the Flat transformer were manufactured and the electrical and magnetic characteristics of its tested. The power loss of sample FO2(Mn-Zn ferrite) sintered at $1350^{\circ}C$ was $350kW/m^3$ in test conditions of 250kHz, 200mT and $100^{\circ}C$, which showed the good power loss property in high frequency. The power loss of FO2 samples has been studied as a function of magnetic flux density and frequency. Steinmetz exponent was 2.82 at 250kHz and 2.73 at 500kHz. These results illustrated the switching of power loss mechanism in ferrite core from hysteresis losses to eddy current losses or others.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.577-584
• /
• 2015

A photovoltaic (PV) system generates electricity by installing a solar energy array; therefore, the photovoltaic system can be easily exposed to external factors, which include environmental factors such as temperature, humidity, and radiation. These factors-as well as shading, in particular-lead to power degradation. When there is an output loss in the solar cell of a PV module package, the output loss is partly controlled by the bypass diode. As solar cells become highly efficient, the characteristics of series resistance and parallel resistance improve, and the characteristics of reverse voltage change. A bypass diode is connected in parallel to the string that is connected in series to the PV module. Ideally, the bypass diode operates when the voltage is -0.6[V] around. This study examines the bypass diode operating time for different types of crystalline solar cells. It compares the reverse voltage characteristics between the single solar cell and polycrystalline solar cell. Special modules were produced for the experiment. The shading rate of the solar cell in the specially made solar energy module was raised by 5% each time to confirm that the bypass diode was operating. The operation of the bypass diode is affected not only by the reverse voltage but also by the forward bias. This tendency was verified as the number of strings increased.

• 한국환경과학회지
• /
• 제19권2호
• /
• pp.247-254
• /
• 2010

Ultrasound and Surfactant aided soil washing process has been shown to be an effective method to remove diesel from soils. The use of surfactants can improve the mobility of diesel in soil-water systems by increasing solubility of adsorbed diesel into surfactant micelles. However, a large amount of surfactant is required for treatment. In addition, synthetic surfactants, specially anionic, are more toxic and the surfactant wastewater is hard to treat by conventional wastewater treatments even by AOPs. Ultrasound improves desorption of the diesel adsorbed on to soil. The mechanisms are based on physical breakage of bonds by hot spot, directly impact onto soil particle surface, the fragmentation of long-chain hydrocarbons by micro-jet and microstreaming in the soil pores. The use of ultrasound as an enhancement method in both anionic and nonionic surfactant aided soil-washing processes were studied. And all experiments were examined proceeded under CMC surfactant concentration, frequency 35 khz, power 400 W, Soil-water ratio 1:3(wt%), particle size 0.24 ~ 2mm and initial diesel concentration. 20,000 mg/kg. Combination with ultrasound showed significant enhancements on all the processes. Especially, nonionic surfactant Triton-X100 with ultrasound showed remarkable enhancements and diesel removal rate enhanced by ultrasound helps desorpting of surfactant adsorbed onto soils which prevented decreasing surfactant activity.

• 농촌계획
• /
• 제21권4호
• /
• pp.35-43
• /
• 2015

The purpose of the research is to analyze damages of TYLCV (Tomato Yellow Leaf Curl Virus) in the context of climate changes and to find the spatial distribution of the damages and characteristics of regions. A TYLCV is generally known for a plant disease related to temperature. Its occurrence rate increases when temperature rises. This disease first occurred in 2008 and rapidly spread nationwide. Due to the spread of a TYLCV, a number of Tomato farms in Korea were damaged severely. To analyze damages of the pest in the context of climate changes, this research estimated production loss under the current situation and RCP scenarios. Additionally, Hot Spot Analysis, LISA, and Cluster analysis were conducted to find spatial distribution and properties of largely damaged regions under RCP scenarios. The results explained that additional production loss was estimated differently by regions with the same temperature rising scenario. Also, largely damaged regions are spatially clustered and factors causing large damages were different across regional cluster groups. It means that certain regions can be damaged more than others by diseases and pests. Furthermore, pest management policy should reflect the properties of each region such as climate conditions, cultivate environment and production technologies. The findings from this research can be utilized for developing rural management plans and pest protection policies.

• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.149-153
• /
• 1984

Postoperative radiotherapy of breast cancer makes it possible to reduce loco-regional recurrence of breast cancer. The treatment technique, which can reduce the low-dose region at the junction and lung, is required. To produce proper dose distribution of internal mammary chain and chest wall, authors tried to find the method to expose $^{60}Co\;\gamma-ray$ on internal mammary region and 7MeV electron on chest wall. Exposure time of $^{60}Co\;\gamma$ and monitor unit of 9MeV were selected so that dose of $^{60}Co$ at 4cm depth was the same as that of 7Mev electron at $80\%$ dose depth. The position and direction of electron beam were changed for $^{60}Co$ beam: $0^{\circ},\;5^{\circ}$ for 0cm seperation; $0^{\circ},\;5^{\circ},\;10^{\circ}$ for 0.5cm seperation; $5^{\circ},\;10^{\circ},\;15^{\circ}$ for 1cm seperation. The results are as followings. 1. When the seperation of two fields was increased, dose on the axis of $^{60}Co$ beam was increased and dose at the junction region decreased while the volume of lung to be exposed to high dose and hot spot size were irregularly changed. 2. The dose distribution in the target volume of internal mammary and chest wall was most ideal when the seperation of two fields was $0\~0.5cm$ and the direction of electron beam was parallel to $^{60}Co$ beam.