• Journal of Nutrition and Health
• /
• 제38권2호
• /
• pp.117-124
• /
• 2005

We investigated the effects of prolonged exposure in hot environmental condition and ingestion of fluid on various physiological variables including plasma glucose, lactate, the rating of perceived exertion (RPE), and heart rate as well as golf putting performance. Six male professional golfers were voluntarily participated in three different putting trials which were separated by seven days of time interval period. Three different putting trials were conducted at either 20℃ or 32℃, or 32℃ + Fluid ingestion. Performing 32℃ + Fluid ingestion trial, all subject ingested sport drink as much as their body mass was decreased. For each experiment, all subjects were undertaken total 48 putting, which separated by four x 12 putting in four different time points (i.e., Rest, 1 hr, 2 hr, and 3 hr). Plasma glucose concentration was significantly decreased with hot ambient condition but it was almost fully recovered by fluid ingestion. Plasma lactate concentration was significantly higher when subjects were exposed in hot environmental condition, and it did not change with fluid ingestion. There was a no different in putting performance and psychological fatigue level (performed by GRID test) at any environmental conditions. The RPE, commonly used for evaluating of physical fatigue level, was significantly dropped by fluid ingestion which indicates lower physical fatigue level. In addition to this, heart rate (HR) was also significantly decreased after fluid ingestion. Based on these results, it was concluded that the ingestion of fluid during prolonged exposure in hot ambient condition decrease the degree of physical fatigue levels and heart rate, which will possibly improve the golf performance when exposed in extreme weather condition in summer. (Korean J Nutrition 38(2): 117～124, 2005)

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.42-45
• /
• 2008

Under the non-operating exposure condition in the hot area, the T-50 cockpit temperature is expected over the requirement according to T-50 environmental criteria. So it is necessary to protect the cockpit from the high temperature condition during the non-operating exposure because the high temperature of the cockpit may result in the cockpit equipment malfunction. In this study, the transparency coating is selected as the method for protecting the cockpit from the high temperature exposure and analyzed the effect on the cockpit heat load attenuation. Some kinds of cockpit coating were reviewed and selected and the analysis was performed about the effect before and after coating application under 1% hot day condition based on the T-50 FSD hot soaking test data. The result of analysis show transparency coating is so effective to attenuate the heat load of T-50 cockpit.

• 항공우주기술
• /
• 제2권2호
• /
• pp.83-88
• /
• 2003

발사시 fairing jettison-separation의 과정에서 발사체에 탑재된 위성체가 우주환경에 노출이 되어 태양광, 지구복사, Albedo, free molecular heating 등의 여러 가지 열환경의 직접적인 영향을 받게 된다. 이 때, 위성체 중에서 발사체의 진행 방향으로 최외각에 위치한 payload box가 worst hot condition의 조건을 만족하며 가열되게 된다. Payload box를 하나의 질량으로 가정하고 적용되는 여러 가지 열환경을 고려하여 온도지배방정식을 정리하면 해석해가 존재하는 1차원 미분 방정식을 유도할 수 있다. 이 식으로부터 구한 해석해를 worst hot condition을 만족하는 payload box에 적용하여 발사시 가열에 의한 온도 상승 정도를 예측하고, 그 결과로부터 위성체의 열적 안정성을 비교적 간단한 방법으로 검증할 수 있다.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1929-1941
• /
• 2014

Now a days, frequency of abnormally high temperatures like heat wave by global warming and climate change is increasing constantly and the number of patient with heat related illness are jumping rapidly. In this study, we chose the case day for the heat wave in Busan area(Busan and Yangsan), 2013 which it was the most hottest year during 21th century. And then, we analysed the weather condition using automatic synoptic observing system(ASOS) data. Also, four indices, heat index(HI), wet bulb globe temperature(WBGT), Man-ENvironment heat EXchange model(MENEX)'s results like Physiological subjective temperature(PST), Physiological strain(PhS), were calculated to evaluate the thermal comfort and stress quantitatively. However, thermal comfort was different as the each station and thermal comfort index during same time. Busan's thermal indices (HI: hot, WBGT: sweltering, PST: very hot, PhS: very hot) indicated relatively higher than Yansan's (HI: very hot, WBGT: sweltering, PST: very hot, PhS: sweltering). It shows that Busan near coast is relatively more comfortable than Yangsan located in inland.

• 한국환경과학회지
• /
• 제12권4호
• /
• pp.503-510
• /
• 2003

How to plan the energy system is one of the keys f3r constructing the Environment -Friendly City. for this reason, a great number of surveys for utilizing unused energy have conducted by a planner. In regard to unused energy, the heat from incineration plants classify as a unused energy having high-exergy-energy. From this point of view, It is studied about the plant systems providing heat to district heating & cooling(D.H.C) and producing electric power. It is divided four system models as system I (10K [kgf/cm$^2$) vapor as outlet of boiler, supply far 10K vapor and return to 60$^{\circ}C$ as supply condition of district heating), system II (30 K vapor as outlet of boiler, supply for 5t vapor and return to 60f as supply condition of district heating), system 111 (30 K vapor as outlet of boiler, supply for 85$^{\circ}C$ hot water and return to 60$^{\circ}C$ as supply condition of district heating), system IV (30 K vapor as outlet of boiler, supply for 47$^{\circ}C$ hot water and return to 40t as supply condition of district heating). The results from the upper condition of four system, System II got a proper on economical benefits and system IV calculated as benefiting on energy saving effects, and suggest indifference curve as the total evaluation method of both economical benefits and energy saving.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.467-474
• /
• 2021

The renewable energy is known as eco-friendly energy to reduce the use of fossil fuel and decrease the environmental pollution due to exhaust gas. Targets of solar collector in domestic are usually acquisitions of hot water and hot air. System of air-heating collector is one of the technologies for obtaining hot air in cases of especially heating room and drying agricultural product. The purpose of this study is to investigate the characteristics of thermal flow such as relative pressure, velocity, outlet temperature and buoyancy effect in air-heating collector using solar heat. The flow field of air-heating collector was simulated using ANSYS-CFX program and the behaviour of hot air was evaluated with SST turbulence model. As the results, The streamline in air-heating collector showed several circular shapes in case of condition of buoyancy. Temperature difference in cross section of outlet of air-heating collector did not almost show in cases of buoyancy and small inlet velocity. Furthermore merit of air-heating collector was not observed in cases of inlet velocities. Even though it was useful to select condition of buoyancy for obtaining high temperature, however, it was confirmed that the trade off between high temperature of room and rapid injection of hot air to room could be needed through this numerical analysis.

• 한국물환경학회지
• /
• 제27권3호
• /
• pp.357-363
• /
• 2011

In spite of numerous advantages in railroads such as mass transportation, high reliability, and environmental soundness etc., the value of railroad construction is relatively underestimated compared to road. This is because the current method of evaluation focuses mainly on economic effect. In this study, considering recent research results, the environmental value of railroad construction was assessed by calculating the effect of reduction of emissions and water contamination. With these two benefits, the environmental effect produced by railroads and road construction was calculated and compared to each other using EMME/3. As a result, the senario 4 which considers 'Hot/Cold start' condition and water contamination had highest benefits. Furthermore, the environmental effect produced by railroad is 55~101% higher than road construction. If the suggested method is used in the current appraisal system, the environment-friendly mode like railway would be highly valued, much more than before.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.99-101
• /
• 2008

At 21st century, material development concepts were changed to fulfill the environmental friendly demands. This study is to study the effect of pressurized nitrogen gas and manganese in high nitrogen austenitic stainless steel(HNS) in which N and Mn elements substitute the nickel element. 100kg HNS ingots were made by Pressurized Vacuum Induction Melting(P-VIM) and were forged according to free forging process. As forged HNS were hot and cold rolled by pilot scale rolling machine. Depending on the rolling condition, the mechanical properties of HNS were changed. The roll thrust and sheet folding showed asymmetry condition between work and drive side during cold and hot rolling. The purpose of this study are to improve workability the hot and cold rolling machine and to set the conditions for establishing the rolling process.

• 환경영향평가
• /
• 제17권3호
• /
• pp.167-176
• /
• 2008

Korea has made the rapid economical development under the condition with the high population density and low available land. In this context, conservation of land environment, connected directly with living quality of human, has mostly ignored. Prior Environment Review System(PERS) is the one to investigate the locational validity, environmental impacts, harmony with surrounding environment, from the early stage of administrative plan or development project. PERS was amended to include SEA(Strategic Environment Assessment) system on June 1, 2006. But, several problems, including the loss of administrative ability, cost, and time, have been appeared, since the system is applied to all administrative plans without any distinction and plans or projects are delayed generally. In this study, the weaknesses of PERS were indicated through the comprehensive analysis including literature survey, study of legal and internet database, and the recently published PERS reports. Based on that, the improvement schemes were suggested to be harmonized with the nature of SEA. This study was mainly focused on a PERS for the designation of conservational area of hot-spring wells, conducted by authors.

• 한국작물학회지
• /
• 제61권4호
• /
• pp.270-276
• /
• 2016

The objective of this study was to find a rapid determination of the hot air stress in maize (Zea mays L.) leaves using a portable chlorophyll fluorescence imaging instrument. To assess the photosynthetic activity of maize leaves, an imaging analysis of the photochemical responses of maize was performed with chlorophyll fluorescence camera. The observed chlorophyll imaging photos were numerically transformed to the photochemical parameters on the basis of chlorophyll a fluorescence. Chlorophyll a fluorescence imaging (CFI) method showed that a rapid decrease in maximum fluorescence intensity ($F_m$) of leaf occurred under hot air stress. Although no change was observed in the maximum quantum yield ($F_v/F_m$) of the hot air stressed maize leaves, the other photochemical parameters such as maximum fluorescence intensity ($F_m$) and Maximum fluorescence value ($F_p$) were relatively lowered after hot air stress. In hot air stressed maize leaves, an increase was observed in the nonphotoquenching (NPQ) and decrease in the effective quantum yield of photochemical energy conversion in photosystem II (${\Phi}PSII$). Thus, NPQ and ${\Phi}PSII$ were available to be determined non-destructively in maize leaves under hot air stress. Our results clearly indicated that the hot air could be a source of stress in maize leaves. Thus, the CFI analysis along with its related parameters can be used as a rapid indicating technique for the determining hot air stress in plants.