• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3925-3932
• /
• 2024

During outages at nuclear power plants, much more care for radiation workers against internal exposure should be ensured given that more hot particles exist relative to the amount during normal operation. If fuel-type hot particles (FTHP) are inhaled, they can cause more severe health risks compared to activation-type hot particles (ATHP), which contain ⁶⁰Co, due to the alpha-emitting nuclides within FTHPs. The activities of difficult-to-measure nuclides within FTHPs inhaled by workers are inferred by the age-dating technique using a¹⁴¹Ce/¹⁴⁴Ce ratio as measured by whole-body counters. However, this method may be limited to outages that last for only a few months due to the short half-life (32.5 days) of ¹⁴¹Ce. We studied the feasibility of utilizing ²⁴¹Am, a nuclide with a long half-life of 432.6 years, as an alternative to ¹⁴¹Ce. Additionally, we improved the performance of a stand-type whole-body counter for low-energy gamma spectroscopy to meet the criterion (RMSE ≤0.25) specified in ANSI/HPS N13.30-2011 by employing an artificial neural network (ANN). This study can contribute to more rapid and accurate internal dose assessments for workers who have inhaled FTHPs during long-term outages at nuclear power plants.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.38-45
• /
• 2017

A finite element analysis-based approach which investigates the causes of the breakdown in the outer ring of the choke at hot rod rolling mill is presented. Two-dimensional drawings of the whole vertical-type mill stand are transformed into three-dimensional CAD models. Non-linear elasto-plastic deformation analysis of material at the roll gap is performed for computing roll force and torque of the work roll. Then, the reaction forces of the bearing rings together with a set of roller bearings that support the work roll are obtained by means of rigid body motion analysis. Finally, stress behaviors in the bearing rings together with a set of roller bearings that support the work roll are investigated by linear elastic analysis. Results reveal that stress at the contact area between the outer ring and roller bearing is extraordinary high when an internal gap between an external surface of the outer ring and the internal surface of the chock due to wear of the inside of the chock occurs.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.575-579
• /
• 2003

In this paper, we describe a Duplex Power Controller for Control Rod Control System(CRCS). A Duplex Power Controller has the various functions for the reliable operations of Control Rod Drive Mechanism(CRDM). Also we have implemented the diverse functions by utilizing the developed Duplex Power Controller. Due to the developed Duplex Power Controller, we are assured that the commercial operation by this system be made before long.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.269-272
• /
• 2006

In this paper we describe the design of a Dual Power Controller(DPC) for Power Control System(PCS) in Nuclear Power Plant. The PCS also provides information regarding rod motion, rod position, and status of the Rod Control System. It has Hot/Stand-by type, and also has the function of fault detection for controller itself and power modules. We have implemented the various functions with the dual Power Controller. Due to the developed DPC, we are assured that the commmecial use by this controller be made before long.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2370-2373
• /
• 2004

In this paper we describe the design of a Dual-Redundant Power Controller(DRPC) for Control Rod Control System(CRCS). The CRCS also provides information regarding rod motion, rod position, and status of the Rod Control System. It has Hot/Stand-by type, and also has the function of fault detection for controller itself and power modules. We have implemented the various functions with the dual-redundant Power Controller. Due to the developed DRPC, we are assured that the commmecial use by this controller be made before long.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.166-173
• /
• 1993

Seed infection to pod and stem blight (Diaporthe phaseolorum) is severe at summer type soybeans maturing at hot and humid conditions. In order to increase germination and plant stand, this experiments were evaluated the effects of fungicide Benoram(Benomyl 20% ${\pm}$ Thiram 20%) seed treatments with different seed sizes on emergence yield at field conditions, and with different infection degrees to pod and stem blight on germination in laboratory. Benoram treatment on seed was improved emergence rate and elongated hypocotyl not increased growth and yield. It was clearly improved length but germinations and germination speed by Benoram fungicide treatment on severely infected seed however was not improved germination rate at good quality of seeds and the effect was higher at large seed cultivar than small ones.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.711-719
• /
• 2008

Although non-real time simulation and pilot based evaluations are available for the development of flight control computer prior to real flight tests, there are still many risky factors. The control law designed for prototype aircraft often leads to degraded performance from the initial design objectives, therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS(In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV(High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA(Variable stability. In flight Simulation Test Aircraft) programs. This paper addresses the concept of switching mechanism for FLCC(Flight Control Computer)-SWMC(Switching Mechanism Computer) using 1553B communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed to reduce abrupt transient and minimize the integrator effect in pitch axis control law. It hans been turned out from the pilot evaluation in real time that the aircraft is controllable during the inter-conversion process through the flight control computer, and level 1 handling qualities are guaranteed. In addition, flight safety is maintained with an acceptable transient response during aggressive maneuver performed in severe flight conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.4
• /
• pp.267-273
• /
• 1977

Rainbow trout were reared in a small indoor aquarium which was equipped with a simple recirculating biofilter combined with a small amount of inflowing water for 199 days from April 25 to November 10, 1977 in Busan where very hot summer air temperature is encountered, and results obtained were promissing as following; 1. The aquarium has dimensions of $1m\;\times\;1m\;\times\;67cm(depth)$, and a bottom center sedimentation chamber of conical type through which out-flowing water is pushing fecal matter and other detritus outward. The conical sedimentation chamber measures 20 cm depth and 20 cm diameter at its upper mouth and tapers to the bottom end which is connected to 4 cm diameter draining pipe. The draining pipe goes through under the tank and then is elevated on the side. The water depth was maintained at about 40 cm depth by adjusting the heigh of draining pipe. The filter bed contained 16 l of $3\~5\;mm$ zeolite gravels, and water circulation rate was about 1030 l/hr. 2. Continuous inflowing water resulted in a good elimination of waste materials through its outflowing water thus reducing waste loading in the filter. 3. Mean temperature of water in the rearing aquarium containing about 400 l water volume was maintained at around 20 to $22^{\circ}C$ by 0.59 l/min of the inflowing well water which usually maintained the temperature of $17^{\circ}C$ during the hot summer season from the first of July to the first of October when the 10-days-mean air temperature ranged from $20^{\circ}\;to\;27.3^{\circ}C$ $(total\;mean\;24.6^{\circ}C) $ and under this condition the fish continued normal growth. 4. The production per 1 l/min of inflowing water with this simple biofilteration reached 30 hg. 5. The total cost including all feed and power during this experimental rearing period fell well within the economic establishment and if the feed and filteration system are improved the benefit-cost ratio will be much increased.