• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.341-346
• /
• 2001

The gun-type gas burner adopted in this study is generally composed of some slits and swirl vanes. Therefore, this paper is studied to investigate the effect of slits and swirl vanes on the turbulent flow fields in the horizontal plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rate $450\;{\ell}/min$, which is equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of subsonic wind tunnel. When the burner has only swirl vanes, the axial mean velocity component shows the characteristic that spreads more remarkably toward radial direction than axial one, but when it has only slits, that is developed spreading more toward axial direction than radial one. Therefore, because the biggest speed is spurted in slits and it derive main flow toward axial direction encircling rotational flow that comes out from swirl vane that is situated on the inside of slits, both slits and swirl vanes composing of cone type gas burner act role that decreases the speed near slits and increases the flow speed in the central part of a burner. Moreover, because rotational flow by swirl vanes and fast jet flow by slits increase turbulent intensities effectively coexisting, the turbulent kinetic energy is distributed with a bigger size fairly near slits than burner models which have only slit or swirl vanes within X/R<0.6410.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.466-475
• /
• 2003

The gun-type gas burner adopted in this study is generally composed of eight slits and swirl vanes. Thus, this paper is studied to investigate the effect of slits and swirl vanes on the turbulent flow fields in the horizontal plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rate 450 $\ell$/min in the test section of subsonic wind tunnel. The axial mean velocity component in the case of burner model with only swirl vanes shows the characteristic that spreads more remarkably toward the radial direction than axial one, it does, however, directly opposite tendency in the case of burner model with only slits. Consequently. both slits and swirl vanes composing of gun-type gas burner play an important role in decrease of the speed near slits and increase of the flow speed in the central part of a burner because the biggest speed spurted from slits encircles rotational flow by swirl vanes and it drives main flow toward the axial direction. Moreover, the turbulent intensities and turbulent kinetic energy of gun-type gas burner are distributed with a fairly bigger size within X/R<0.6410 than burner models which have only slits or swirl vanes because the rotational flow by swirl vanes and the fast jet flow by slits increase flow mixing, diffusion, and mean velocity gradient effectively.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.46-51
• /
• 2007

포항가속기연구소의 HFMX(High Flux Macromolecular X-ray crystallography) 빔라인은 다극 위글러의 방사광을 이용한다. 따라서 고 열량부하에 적합한 두 개의 수평 및 수직 슬릿이 빔라인의 프론트엔드 영역에 설치되었다. 빔 산란을 피하면서 고 열량부하를 처리하기 위하여, 빔을 차단하는 수평 슬릿의 두 글리드콥 블록은 수직면 상에서 기울어진, $10^{\circ}$의 스침각 경사면 구조를 이루고 있다. 글리드콥 블록들은 두 개의 구동막대에 의해서 궤도대를 따라 각각 병진함으로써 슬릿의 간격을 조정한다. 구동막대 내부에 가공된 유로를 통하여 흐르는 냉각수가 두 블록의 열량부하를 냉각시킨다. 수직 슬릿은 진공용기에 대한 설치 방향과 스침각 경사면 구조의 경사각만 다를 뿐 수평 슬릿과 동일한 구조를 가지고 있다. 블록들이 궤도대 상에서 정밀하게 조정되므로 두 블록 간의 정렬이 필요치 않은 장점이 있으며 설치된 슬릿들은 안정적인 작동 성능을 보이고 있다. 또한, 두 슬릿의 냉각 성능도 만족할 만한 것으로 나타났다. 본 논문에서는 두 슬릿의 설계에 대한 상세한 설명이 제시되고 그 작동 성능을 검토한다.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.581-586
• /
• 2020

본 논문에서는 수평 슬릿이 추가된 지상파 디지털 TV(DTV) 및 UHD TV용 광대역 루프 안테나의 설계 절차와 방법을 제안하였다. 제안된 루프 안테나는 정사각형 루프와 두 개의 원형 섹터로 구성되는 기존의 광대역 루프 안테나에 소형화하기 위해 두 개의 원형 섹터에 수평 슬릿을 추가하였다. 급전을 위해 아래쪽 원형 섹터의 중앙에 동일면 도파관(CPW; coplanar waveguide) 전송선로가 삽입되었다. CPW 급전선로는 DTV 및 UHD TV 응용을 위해 75 옴 포트 임피던스를 사용하여 설계되었으며, 임피던스 정합을 개선하기 위해 중심신호선의 끝이 점점 가늘어지게 설계되었다. 최종 설계된 안테나는 두께가 0.8 mm인 FR4 기판에 제작하였다. 특성 실험 결과, 전압 정재파비(VSWR; voltage standing wave) < 2인 대역이 444.3-820.1 MHz로 DTV 대역(470-698 MHz)과 UHD TV 대역(698-771 MHz)에서 동작하는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1299-1308
• /
• 2003

This paper is studied to investigate the effect of slits and swirl vanes on the development of turbulent flow fields in gun-type gas burner with a cone type baffle plate because this gas burner is generally composed of eight slits and swirl vanes. All of turbulent characteristics including mean velocities were measured in the horizontal plane and cross section by using X-type hot-wire probe from hot-wire anemometer system. This experiment is carried out at flow rate 450 l/min in the test section of subsonic wind tunnel. Slits cause the fast jets, and then they have the characteristic that the flow is not adequately spread to radial direction and has long flow length and very small flow velocity distribution in the central part. On the contrary, swirl vanes does not have long enough for adequate flow length to downstream because the rotational flow diffuses remarkably to radial direction. However, the suitable arrangement between slits and swirl vanes causes effective flow width and flow length, and then it promotes fast flow mixing over the entire region including central part to increase turbulence more largely and effectively. Therefore, it is thought as a very desirable design method in gun-type gas burner to locate slits on the outside of swirl vanes.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.550-553
• /
• 2008

In this paper, experiments of air-breathing proton exchange membrane fuel cell (PEMFC) for mobile devices were carried out according to the cathode conditions. These conditions are defined by the cathode flow field plate type (the channel type, the open type) and the cathode surface direction. Single cell and 6-cell stack were used in this experiments. The experimental results showed that the open type cathode flow field plate gave better performance for small size PEMFCs because the open type cathode plate allowed better air convection than the channel type cathode plate. In the experiments related to the direction of the slits on the cathode flow field plate, the horizontal slit cell was better than the vertical slit cell. With respect to the cathode surface direction, when the cathode surface is placed in the direction normal to the ground, PEMFC generated more stable power in the mass transport loss region.

• 한국광학회지
• /
• 제8권1호
• /
• pp.7-13
• /
• 1997

기존에 제작된 칼날주사형 OTF 측정장치의 물체부와 상분석부를 개선하여 측정을 자동화함으로써 MTF 측정 정확도를 향상시켰다. 여러 가지 크기를 갖는 핀홀과 슬릿들을 물체로 사용하였고, fishtail edge를 상분석부의 수평방향에 45.deg로 부착시킴으로써 radial과 tangential 방향의 MTF를 동시에 측정할 수 있도록 하였다. 또한 상분석부의 스텝핑 모터 구동장치와 측정 컴퓨터 프로그램을 개선하였고, SIRA 그룹의 50nm 표준렌즈를 사용하여 OTF 측정장치의 측정 정확도를 평가하였다.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.78-81
• /
• 2014

This paper presents an advanced patterned vertical aligned nematic liquid crystal (APVA) mode as a way of improving the transmittance of the conventional patterned, vertically-aligned nematic liquid crystal (PVA) mode. The APVA was characterized by multi-electrodes, which play an important role in generating a horizontal electric field that prevents LC disclination in the vicinity of the middle region of electrodes between top and bottom slits in PVA mode. The proposed APVA mode focused on improving dramatically the transmittance with excellent image quality. In the simulation, the APVA mode improved the transmittance by more than 22%, compared to the conventional VA modes. Therefore, it is useful to upgrade the LCD display quality.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.119-128
• /
• 2015

본 연구에서는 파일지지식 소파방파제의 파압특성을 2차원 수리모형실험을 통해 분석하였다. 단일 유공벽 및 이중 유공벽을 가진 모형체를 통해 실험을 수행하였으며, 측정된 파압결과는 Goda 파압과 비교분석하였다. 단일 유수실의 경우, 측정된 최대파압이 Goda 파압과 비교하여 전면벽의 경우 25%, 후면벽의 경우 30%가 감소하였다. 이중 유수실의 경우에는 최대파압이 Goda 파압대비 전면벽 27%, 중간벽 53%, 후면벽 64% 감소한 것을 알 수 있다. 이로부터 이중 유공벽을 가진 소파방파제가 단일 유공벽의 경우와 비교하여 파압이 현저히 감소하는 것을 알 수 있었으며, 이는 유공 1실과 2실의 횡슬릿의 유공벽을 통과하면서 발생하는 파랑에너지의 소산으로 인해 후면벽에 작용하는 파압의 크기가 작아졌기 때문으로 판단된다.