• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1867-1870
• /
• 2005

The celestial navigation is one of alternatives to GPS system and can be used as a backup of GPS. In the celestial navigation system using more than two star trackers, the vehicle's ground position can be solved based on the star trackers' attitude information if the vehicle's local vertical or horizontal angle is given. In order to determine accurate ground position of flight vehicle, the high accurate local vertical angle measurement is one of the most important factors for navigation performance. In this paper, the Earth geophysical deflection was analyzed in the assumption of using the modern electrolyte tilt sensor as a local vertical sensor for celestial navigation system. According to the tilt sensor principle, the sensor measures the tilt angle from gravity direction which depends on the Earth geoid surface at a given position. In order to determine the local vertical angle from tilt sensor measurement, the relationship between the direction of gravity and the direction of the Earth center should be analyzed. Using a precision orbit determination software which includes the JGM-3 Earth geoid model, the direction of the Earth center and the direction of gravity are extracted and analyzed. Appling vector inner product and cross product to the both extracted vectors, the magnitude and phase of deflection angle between the direction of gravity and the direction of the Earth center are achieved successfully. And the result shows that the angle differences vary as a function of latitude and altitude. The maximum 0.094$^{circ}$angle difference occurs at 45$^{circ}$latitude in case of 1000 Km altitude condition.

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.165-170
• /
• 2014

수평횡파(SH-wave)는 배관과 같은 박판 구조물에서 판파 모드로 전파하고 분산성이 단순하여 구조물의 건전성 평가에 유용하다. 전자기초음파탐촉자(EMAT)는 비접촉식으로 자석과 코일 배열을 조절하여 수평횡파를 발생하기 용이하다. 따라서 수평횡파 전자기초음파탐촉자(SH-EMAT)를 이용한 자동화 검사 시스템은 박판 구조물 건전성 감시에 매우 유용하다. 하지만 발전설비 또는 자동화 장비 등에서는 전자기노이즈가 상당히 많이 발생하고 EMAT 수신 센서는 전자기노이즈에 취약한 면이 있다. 광섬유 센서는 빛을 이용하여 전자기노이즈 환경에서 매우 유용하게 활용될 수 있다. 본 연구에서는 이러한 환경적 제약을 고려하여 광섬유 패브리-페롯 간섭계(FFPI)를 SH-EMAT으로 발생되는 초음파의 수신용 센서로 제안하였다. 평판시험편에서 SH-EMAT의 신호를 FFPI 센서를 이용하여 수신하고 이 신호에 대한 분석을 하였다. 제안된 FFPI 센서가 EMAT으로 가진된 SH wave의 신호를 명료하게 수신할 수 있음을 확인하였다.

• 대한원격탐사학회지
• /
• 제31권5호
• /
• pp.421-432
• /
• 2015

동일 센서 내의 스테레오 취득 원리에 기반하여 얻어진 동종센서 스테레오와 서로 다른 센서에서 얻어진 영상간에 임의로 결합된 이종센서 스테레오는 기하 특성과 스테레오 모델 정확도 측면에서 많은 차이를 보이게 된다. 이 논문에서는 고해상도 위성영상에서의 얻어진 동종센서 스테레오 모델과 이종센서 스테레오 모델을 비교한다. 실험을 위해 동일 지역을 촬영한 SPOT-5 스테레오와 KOMPSAT-2 스테레오 영상을 활용하여 총 2쌍의 동종센서 스테레오와 4쌍의 이종센서 스테레오 영상을 이용하였다. 동종센서 스테레오 모델의 경우 모두 안정적인 스테레오 기하를 형성한 반면, 이종센서 스테레오 모델의 경우 2조합은 비교적 안정적인 기하를 다른 2조합은 매우 불안정한 기하를 형성하였다. 그리고 불안정한 기하를 형성한 이종센서 스테레오의 경우 3차원 위치 정확도가 크게 감소하였다. 안정적인 스테레오 기하를 형성하는 이종센서 스테레오의 경우에도 동종센서 스테레오와는 차이점이 있었다. 전반적으로 수직 정확도 측면에서는 동종센서 스테레오 모델이 더 높은 정확도를 보인 반면, 수평 정확도 측면에서는 이종센서 스테레오 모델이 더 높은 정확도를 보여주었다. 논문에서는 두 가지 스테레오 모델이 가지는 기하 특성과 3차원 모델 정확도의 차이를 잘 드러내며, 고해상도 스테레오 영상 특히 이종위성 스테레오 자료를 효과적으로 활용하는데 있어 고려되어야 할 중요한 분석 결과들을 제시한다.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.266-272
• /
• 2014

This study proposes a closed-loop shaping control method with $H_{\infty}$ optimization for optical image stabilization (OIS) in mobile phone cameras. The image stabilizer is composed of a horizontal stage constrained by ball bearings and actuated by the magnetic force from voice coil motors. The displacement of the stage is measured by Hall effect sensors. From the OIS frequency response experiment, the transfer function models of the stage and Hall effect sensor were identified. The weight functions were determined considering the tracking performance, noise attenuation, and stability with considerable margins. The $H_{\infty}$ optimal controller was executed using closed-loop shaping and limiting the controller order, which should be less than 6 for real-time implementation. The control algorithm was verified experimentally and proved to operate as designed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1107-1108
• /
• 2008

The purpose of this study is to develope a computer mouse using the head movements and eye blink in order to help the disability persons who can't move the hands or foot because of car accident or cerebral apoplexy. The mouse is composed of two gyro-sensors and photo sensor. The gryo-sensors detect the head horizontal and vertical angular velocities, respectively. The photo sensor detect the eye blink to perform click, double click, and to reset the head position. In the results, we could control the mouse points in real time using the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.123.1-123
• /
• 2001

For Autonomous navigation of the mobile robots, the robots' capability to recognize 3D environment is necessary. In this paper, an on-line 3D map building method for autonomous mobile robots is proposed. To get range data on the environment, we use an sensor system which is composed of a structured light and a CCD camera based on optimal triangulation. The structured laser is projected as a horizontal strip on the scene. The sensor system can rotate $\pm$ $30{\Circ}$ with a goniometer. Scanning the system, we get the laser strip image for the environments and update planes composing the environment by some image processing steps. From the laser strip on the captured image, we find a center point of each column, and make line segments through blobbing these center poings. Then, the planes of the environments are updated. These steps are done on-line in scanning phase. With the proposed method, we can efficiently get a 3D map about the structured environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.123.5-123
• /
• 2001

For autonomous navigation of the mobile robots, the robots' capability to recognize 3D environment is necessary. In this paper, an on-line 3D map building method for autonomous mobile robots is proposed. To get range data on the environment, we use a sensor system which is composed of a structured light and a CCD camera based on optimal triangulation. The structured laser is projected as a horizontal strip on the scene. The sensor system can rotate$\pm$30$^{\circ}$ with a goniometer. Scanning the system, we get the laser strip image for the environments and update planes composing the environment by some image processing steps. From the laser strip on the captured image, we find a center point of each column, and make line segments through blobbing these center points. Then, the planes of the environments are updated. These steps are done on-line in scanning phase. With the proposed method, we can efficiently get a 3D map about the structured environment.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.182-188
• /
• 1994

In recent years, navigational and fisheries instruments are rapidly advancing. Especially data processing. data transferring and data interchange throughout the digital signals has been in high progress. Even though the ship's heading is also provided by a gyro-compass, an electro-magnetic compass studying by us currently is easy to issue adequate data to instruments requiring the information for the ship's heading. especially in small fishing boats. As the main element of the electro-magnetic compass is a three-axis magnetic sensors, the developing of the high performance sensor is in highly necessity in the beginning. This paper describes on the development of electro-magnetic compass of three-axis fixed type by using three-axis detection new type magnetic sensor without gimbals. even though usual electro-magnetic compass have to need necessarily a gimbal system in order to keep horizontal condition of the compass.

• 한국항해학회지
• /
• 제23권4호
• /
• pp.105-114
• /
• 1999

Generally, though we use the vision sensor or arc sensor in welding process, it is difficult to define the welding parameters which can be applied to the weld quality control. Especially, the important Parameters is Arc Voltage, Welding Current, Welding Speed in arc welding process and they affect the decision of weld bead shape, the stability of welding process and the decision of weld quality. Therefore, it is difficult to determine the unique relationship between the weld bead geometry and the combination of various welding condition. Due to the various difficulties as mentioned, we intend to use Fuzzy Logic and Neural Network to solve these problems. Therefore, the combination of Fuzzy Logic and Neural network has an effect on removing the weld defects, improving the weld quality and turning the desired weld bead shape. Finally, this system can be used under what kind of welding recess adequately and help us make an estimate of the weld bead shape and remove the weld defects.

• 센서학회지
• /
• 제14권2호
• /
• pp.101-108
• /
• 2005

The research on the avoidance of the large-obstacles such as a wall, a large box, etc. using ultrasonic sensors has been generally progressed up to now. But the mobile robot could meet a small-obstacle such as a small plastic bottle, a small sphere, and so on in its designated path, and could be disturbed by them in the locomotion of the mobile robot. So, it is necessary to research on the avoidance of a small-obstacle. In this paper, a robot's small-obstacle perceiving system was designed and fabricated by arranging four ultrasonic sensors on the plastic plate to avoid small-obstacles. The system was installed on the upper part of the mobile robot with the slope angles between $40.7^{\circ}$ and $23.3^{\circ}$ to a horizontal line and the dynamic characteristic test of the robot was performed. As the result, it was confirmed that the mobile robot with the system could avoid small-obstacles in indoor environment safely.