• Wind and Structures
• /
• 제31권4호
• /
• pp.321-334
• /
• 2020

Engineering type tropical cyclone (TC) wind field models are used to estimate TC wind hazard. Some of the models are well-calibrated using observation data, while others are not extensively compared and verified. They are all proxies to the real TC wind fields. The computational effort for their use differs. In the present study, a comparison of the predicted wind fields is presented by considering three commonly used models: the gradient wind field model, slab-resolving model, and a linear height-resolving model. These models essentially predict the horizontal wind speed at a different height. The gradient wind field model and linear height-resolving model are simple to use while the nonlinear slab-resolving model is more compute-intensive. A set of factors is estimated and recommended such that the estimated TC wind hazard by using these models becomes more consistent. The use of the models, including the developed set of factors, for estimating TC wind hazard over-water and over-land is presented by considering the historical tracks for a few sites. It is shown that the annual maximum TC wind speed can be adequately modelled by the generalized extreme value distribution.

• 한국의류학회지
• /
• 제25권7호
• /
• pp.1303-1313
• /
• 2001

This study was performed to develop a mobile functional pattern reflecting the characteristics of the middle aged women's lower body types based on the slacks construction components. The results and procedures obtained from this study were as follows; 1. The bodys measurement of the 252 middle aged women of 45∼59 years old were used to analyze the size and somato type. 2. For multiple analysis of the lower body types, horizontal and vertical section maps were obtained by sliding gauge method and extracted constructional factors of slacks. 3. The following condition was determined with both standing and moving position of body: (gradient of C.B.L/2)+3°and (back crotch extention)+2cm. 4. Development of new slacks pattern drafting was based on the result of data analysis. Trough the wearing test by the sensory evaluation, It showed that developed slacks pattern was judged better than existing patterns in items of comfort of comfort of silhouette and moving.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1138-1149
• /
• 1988

본 연구에서는 논란의 여지가 많은 문제점을 구간별 특성 척도 분석으로 보다 명확히 하고, 매질이 물과 공기인 경우 실험을 통하여 난류 열대류 구조를 분석하여 척도분석 및 Kraichnan등의 분석을 통해 확인된 바 있는 지수법칙층의 존재를 확인하 고자 한다.

• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.375-384
• /
• 2022

The variation of the undrained shear strength (c_u) is an important consideration for assessing slope stability in engineering practice. Previous studies focused on the three-dimensional (3D) stability of slopes in normally consolidated clays generally assume the undrained shear strength increases linearly with depth but does not vary in the horizontal direction. To assess the 3D stability of slopes with spatially varying undrained shear strength, the kinematic approach of limit analysis was adopted to obtain the upper bound solution to the stability number based on a modified failure mechanism. Three types failure mechanism: the toe failure, face failure and below-toe failure were considered. A serious of charts was then presented to illustrate the effect of key parameters on the slope stability and failure geometry. It was found that the stability and failure geometry of slopes are significantly influenced by the gradient of c_u in the depth direction. The influence of c_u profile inclination on the slope stability was found to be pronounced when the increasing gradient of c_u in the depth direction is large. Slopes with larger width-to-height ratio B/H are more sensitive to the variation of c_u profile inclination.

• 지질공학
• /
• 제17권4호
• /
• pp.643-653
• /
• 2007

수락산 터널지역 내 8개 시추공에서 조사된 기반암의 평균 수리전도도 $2.64{\times}10^{-8}m/sec$, 평균 RQD 78%, 평균공극율 0.51% 및 지하수위는 $77.06{\sim}125.97m$의 범위이었다. 지하수위와 표고간의 회귀분석 결과를 이용하여 수락산 터널 지역 내 두 개의 정상부에서 지하수위를 추정하여 구한 터널 구간의 평균적인 수평수리경사는 0.267 이었다. 수락산 터널 구간에서 현장투수시험에 의해 구해진 최소 수리전도도는 $5.56{\times}10^{-9}m/sec$, 최대 수리전도도는 $6.12{\times}10^{-8}m/sec$, 평균 수리전도도는 $2.64{\times}10^{-8}m/sec$ 이었다. 최소, 최대 및 평균 수리전도도와 평균적인 수평수리경사를 이용하여 산정된 수락산 터널 구간 내에서의 단위 길이 당 지하수 유출량은 각각 $0.00585m^2/day,\;0.06434m^2/day$ 및 $0.02775m^2/day$ 이었다. 물수지분석에 의한 연구지역 내 단위함양유역 당 순수지하수함양율은 224mm/yr로 산정되었다. 터널굴착이 완료된 후 최소, 최대 및 평균 수리전도도를 적용한 지하수위 변동예측 모사에 의하면 수리전도도가 낮을수록 터널 내로의 유출량은 적었지만, 지하수위 강하량은 크게 나타났다. 그리고, 최대 수리전도도를 적용한 모사 시에는 터널로의 유출량이 크지만, 대수층으로의 충진이 빠르게 발생하여 지하수위가 짧은 시간에 회복되었다.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1101-1110
• /
• 2005

In this paper we present the numerical results of the behavior of the horizontal vortex generated by ejecting a liquid vertically upward from an orifice into the bulk fluid above the orifice. The numerical calculation has been performed for the axi-symmetric Navier-Stokes equation. A simple flow-visualization experiment was also conducted to qualitatively verify the numerical solutions. Three cases of the flow configurations studied in this paper are; firstly, the vortex was generated without any background rotation, secondly, the vortex was made under a full background rotation, and thirdly, the vortex was made during the spin-up process such that only the region adjacent to the side wall was set into motion viewed in the inertial frame of reference. It was shown that the swirl flow at the inlet boundary affects considerably the formation and development of the vortex for the second case. In the third case, it was remarkable to see that the vortex cannot penetrate into the region near to the side wall of the tank, because of the strong swirl flow and corresponding high pressure gradient in the region.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.95-101
• /
• 1996

In this paper, the steady 2-dimensional model for a long horizontal line with different end temperatures undergoing natural convection at very high Rayleigh number is proposed to numerically investigate the heat transfer and flow characteristics. The dimensionless governing equations are solved by using SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm which is developed using control volumes and staggered grids. The numerical results are verified by comparison with the operating PWR test data. The analysis focuses on the effects of variation of the heat transfer rates at the pipe surface, the thermal conductivities of the pipe material and the thickness of the pipe wall on the thermal stratification. The results show that the heat transfer rate at the pipe surface is the controlling parameter. A significant reduction and disappearance of thermal stratification phenomenon is observed at the Biot number of 5.0$\times$10$^{-2}$. The results also show that the increment of the thermal conductivity and thickness of the wall weakens the thermal stratification and somewhat reduces azimuthal temperature gradient in the pipe wall. Those effects are however minor, when compared with those due to the variation of the heat transfer rates at the surface of the pipe wall.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.481-486
• /
• 1997

The interfacial shear stress is experimentally investigated for co-current air-water stratified flow in inclined rectangular channels having a length of 1854mm, width of 120mm and height of 40mm at almost atmospheric pressure. Experiments are carried out in several inclinations from $0^{\circ}\;up\;to\;10^{\circ}$. The local film thickness and the wave height are measured at three locations, i.e., L/H = 8,23, and 40. According to the inclination angle, the experimental data are categorized into two groups; nearly horizontal data group ($0^{\circ}\;{\leq}\;{\theta}\;{\leq}\;0.7^{\circ}$), and inclined channel data group ($0.7^{\circ}\;{\leq}\;{\theta}\;{\leq}\;10^{\circ}$). Experimental observations for nearly horizontal data group show that the flow is not fully developed due to the water level gradient and the hydraulic jump within the channel. For the inclined channel data group, a dimensionless wave height, $\Delta$h/h, is empirically correlated in terms of $Re_{G}$ and h/H. A modified root-mean-square wave height is proposed to consider the effects of the interfacial and wave propagation velocities. It is found that an equivalent roughness has a linear relationship with the modified root-mean-square wave height and its relationship is independent of the inclination.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.610-613
• /
• 2010

수평방향의 전기히터 방식의 Rijke tube는 구조와 원리가 비교적 간단하여 열 음향 불안정 연구에 대표적으로 사용되고 있다. 본 논문은 음향공 특성연구의 일환으로 현재까지 수행하였던 상온감쇠실험과 열적 구배를 갖는 열 음향 불안정 환경과의 실험을 비교하기 위하여 연속적인 실험을 위하여 장시간에도 안정적인 Rijke Tube 제작 및 구성 방법을 제시하였다. 또한 모사된 열 음향 불안정 환경에 음향공을 장착하여 감쇠특성을 확인하여 추후 연구에 필요한 기초자료를 확보하였다.

• 한국항만학회지
• /
• 제9권2호
• /
• pp.25-38
• /
• 1995

The wind generated circulation model describes the phenomenon based on the following physical assumptions: a) As the horizontal dimension of the flow domain is several orders of magnitude larger than vertical dimension, nearly horizontal flow is realistic. b) The time taken for circulation to develop may effect on the flow domain of the earth's rotation, the contribution of the Coriolis force. c) A flow domain of large dimension results in quite large Reynolds number and the Reynolds stresses are approximated by the turbulent mean velocity gradient. d) The circulation is forced by the shear stresses on the water surface exercised by the wind. Modification made to the depth average approximation of the convective terms and the bed shear stress terms by adopting a certain distribution of current over the depth and laboratory measurements for the bed shear expression. Modification circulation patterns, energy evolution and surface profile gave the significant differences comparing with the classical model results. The modified model results in higher free surface gradients balancing both the free surface shear and the bed shear and consequently to higher surface profiles along the coast.