• 한국농공학회지
• /
• 제44권4호
• /
• pp.129-138
• /
• 2002

This paper presents a study on the discharge capacity of geotextiles as a horizontal drain layer placed between the layers of earth fill and natural soft ground. Required discharge capacity of geotextiles as drain layers estimated by consolidation analysis is proportional to the consolidation coefficient of the ground soils and the width of the earth fills. The field discharge capacity of the geotextiles are measured by the hydraulic transmissivity test. And the results show wide variation according to the material characteristics of geotextiles, water content of the soils, vertical pressure, and etc. For the short horizontal drain length, geotextile filter mat can be used for the horizontal drain layer. And f3r the long drain($25{\sim}55m$), it is used for the drain together with Bord Drain.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.285-290
• /
• 1997

• 한국관개배수논문집
• /
• 제5권2호
• /
• pp.20-32
• /
• 1998

In the present study, 2-D consolidation theory of the dredged clay by means of horizontal drain method is proposed. The horizontal drain method to install the drains such as plastic drain board within the dredged clay is a soil improvement method to accel

• 산업기술연구
• /
• 제23권A호
• /
• pp.109-118
• /
• 2003

This paper is results of numerical works of investigating effects of horizontal drain arrangements on vacuum consolidation. Extensive numerical analyses were carried out to find the appropriate arrangements of horizontal drain of vacuum consolidation. Commercially available program of CRISP, well known to be good to modelling the behavior of clay material, was used Cam-clay model, based on the Critical State of Soil Mechanics(CSSM), was used to simulate the geotechnical engineering behavior of clay. Model test results carried out previously in the laboratory were compared with numerically estimated results and it was found that results about consolidational settlement with times were in good agreements. Based on this confirmation, parametric numerical study was performed to investigate effects of horizontal drain arrangements on vacuum consolidation with changing the vertical and horizontal spacings between drains for the given soil properties and vacuum. The effect of distance of drain located in top layer from the surface of the ground on the settlement due to vacuum was also investigated. As a results of numerical analyses, appropriate arrangements of horizontal drain to maximize the consolidation settlement due to vacuum were found. The mechanism of vacuum consolidation about the vacuum pressures being transferred to the effective stresses around drains was also evaluated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.33-40
• /
• 2000

The horizontal drain method is one of the soil improvement methods in reclamation works using dredged soils. In this method, plastic drain boards are installed horizontally in the ground, and a seepage pressure or negative pressure is applied through one end of these drains. In this study, a basic consolidation test using horizontal drains was conducted to investigate the effectiveness of this method. The configuration of soil box which was used in this test is 100cm(B)${\times}$100cm(L)${\times}$85cm(H). The drain board was reduced to 25mm${\times}$5mm. The variations in settlement and volume of drain water during the consolidation process were measured, and the distribution of water content and the transpormation of horizontal drain were investigated.

• 산업기술연구
• /
• 제21권A호
• /
• pp.293-301
• /
• 2001

This paper is experimental results of investigating the efficiency of horizontal vacuum drainage system. Effects of size and shape of drain on horizontal vacuum drainage were studied. Model tests in the laboratory with soft marine clay were carried out with drain pipe of having three different diameters and PBD (Plastic Board Drain) of strip shape so that consolidation settlement of soft clay due to applied vacuum pressure, amount of discharge, ground settlement and distributions of pore pressure and undrained shear strength were measured during testing. From results of model test, amount of discharge due to vacuum pressure was increased with the diameter of pipe drain whereas the drain efficiency of pipe in per unit area of drain surface was decreased with diameter of pipe. The rate of discharge per unit time was reduced very fast with diameter of pipe. Settlement of ground surface with time was increased with diameter of pipe as a result of increase of discharge to drain pipe.

• 한국지반공학회논문집
• /
• 제18권1호
• /
• pp.59-70
• /
• 2002

연직배수공법에서 과잉간극수를 배제하기 위해 연직배수재와함께 수평배수층이 지반 위에 설치된다. 이 논문에서는 수평배수층의 통수능을 고려한 압밀해석 방법을 개발하고 수평배수층의 소요통수능을 결정하는 공식을 제안하였다. 이 해석으로부터 성토하중의 재하속도의 영향은 매우 적다는 것을 알게 되었다. 이 공식에서는 압밀계수, 연직배수재의 타설간격, 수평배수층의 배수거리, 압축지수 및 압밀침하 대상층의 두께의 함수로 소요통수능의 결정이 가능하다.

• 한국지반신소재학회논문집
• /
• 제3권1호
• /
• pp.17-25
• /
• 2004

준설토의 표층개량을 위해 타설하는 수평배수재의 개량효과를 증가하기 위하여 수평배수재의 단부에 진공압을 가하여 지중의 간극수를 강제로 배출하는 진공압식 수평배수공법이 사용되고 있다. 본 연구에서는 진공압의 크기에 따른 준설매립지반의 압밀 및 강도 증가효과를 규명하기 위하여 토조시험을 실시한 후 순수 자중압밀의 경우와 비교하였다. 그 결과 자중압밀의 경우 표층부로부터 깊이가 깊어질수록 함수비가 작아지는 경향을 보였으나, 진공압이 재하된 경우는 진공압의 크기가 커질수록 배수재 주위에 낮은 함수비가 배수재에서 멀어질수록 높은 함수비 분포를 나타내었다. 진공압이 재하된 경우 준설토의 전단강도 또한 배수재를 중심으로 큰 개량효과를 얻을 수 있었으며, 토조시험기의 폭이 0.5m로 실제 현장에서 적용되는 배수재 간격이 0.7m~1.2m인 것을 고려했을 때 토조시험기에서는 진공압 30kPa~40kPa 범위에서 최적의 압밀효과를 얻을 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제13권3호
• /
• pp.77-83
• /
• 2012

연약지반 개량공법에 있어서 대부분의 수평 배수층은 모래나 쇄석 등의 골재를 이용하고 있으나, 이러한 골재를 수평 배수층으로 사용하는 경우에는 종종 원지반의 침하불량을 유발하는 경우가 발생하고 있다. 이에 수평 배수층을 깔지 않고 수평 배수용 파이프를 이용하는 수평배수관망 시스템이 개발되어 적용되고 있다. 이러한 공법은 반복 성토과정으로 발생하는 과잉 간극수압을 수평 배수관망으로 직접 배수하는 시스템이다. 본 연구에서는 수평배수관망 시스템의 적용성과 시공성을 확인하고자 실 규모 현장시험 시공을 수행하여 수평배수관망 시스템의 적용성을 평가하였다. 현장시험시공을 통하여 수평 배수관망 시스템의 침하 거동특성을 살펴보았으며, 또한 수평배수관망 변형정도를 확인하여 일반적인 수평배수층을 이용하는 공법과 비교분석하여 그 효용성을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 봄 학술발표회 논문집
• /
• pp.119-126
• /
• 1998