• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.856-862
• /
• 2015

Tidal current energy is an important alternative energy resource among the various ocean energy resources available. The tidal currents in the South-Western sea of Korea can be utilized for the development of tidal current power generation. Tidal power generation can be beneficial for many fishing nurseries and nearby islands in the southwest region of Korea. Moreover, tidal power generation is necessary for promoting energy self-sufficient islands. As tidal currents are always available, power generation is predictable; thus, tidal power is a reliable renewable energy resource. The selection of an appropriate hydrofoil is important for designing a tidal current turbine. This study concentrates on the selection and numerical analysis of four different hydrofoils (MNU26, NACA63421, DU91_W2_250, and DU93_W_210LM). Blade element momentum theory is used for configuring the design of a 50 W class turbine rotor blade. The optimized blade geometry is used for computational fluid dynamics (CFD) analysis with hexahedral numerical grids. Among the four blades, NACA63421 blade showed the maximum power coefficient of 0.45 at a tip speed ratio of 6. CFD analysis is used to investigate the power coefficient, pressure coefficient, and streamline distribution of a 50 W class horizontal axis tidal current turbine for different hydrofoils.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.296-296
• /
• 2015

The aim of this paper is to numerically explore the feasibility of designing a Mini-Hydro turbine. The interest for this kind of horizontal axis turbine relies on its versatility. For instance, in the field of renewable energy, this kind of turbine may be considered for different applications, such as: tidal power, run-of-the-river hydroelectricity, wave energy conversion. It is fundamental to improve the turbine performance and to decrease the equipment costs for achievement of "environmental friendly" solutions and maximization of the "cost-advantage". In the present work, the commercial CFD code ANSYS is used to perform 3D simulations, solving the incompressible Unsteady Reynolds-Averaged Navier-Stokes (U-RANS) equations discretized by means of a finite volume approach. The implicit segregated version of the solver is employed. The pressure-velocity coupling is achieved by means of the SIMPLE algorithm. The convective terms are discretized using a second order accurate upwind scheme, and pressure and viscous terms are discretized by a second-order-accurate centered scheme. A second order implicit time formulation is also used. Turbulence closure is provided by the realizable k - turbulence model. In this study, a mini hydro turbine (3kW) has been considered for utilization of horizontal axis impeller. The turbine performance and flow behavior have been evaluated by means of numerical simulations. Moreover, the performance of the impeller varied in the pressure distribution, torque, rotational speed and power generated by the different number of blades and angles. The model has been validated, comparing numerical results with available experimental data.

• Wind and Structures
• /
• 제38권5호
• /
• pp.341-354
• /
• 2024

This paper presents a theoretical method to deal with the aerodynamic performance and pitch optimization of the horizontal axis wind turbine blades at low wind speeds. By considering a blade element, the functional relationship among the angle of attack, pitch angle, rotational speed of the blade, and wind speed is derived in consideration of a quasi-steady aerodynamic model, and aerodynamic loads on the blade element are then obtained. The torque and torque coefficient of the blade are derived by using integration. A polynomial approximation is applied to functions of the lift and drag coefficients for the symmetric and asymmetric airfoils respectively, where specific expressions of aerodynamic loads as functions of the angle of attack (which is a function of pitch angle) are obtained. The pitch optimization problem is investigated by considering the maximum value problem of the instantaneous torque of a blade as a function of pitch angle. Dynamic pitch laws for HAWT blades with either symmetric or asymmetric airfoils are derived. Influences of parameters including inflow ratio, rotational speed, azimuth, and wind speed on torque coefficient and optimal pith angle are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.251-252
• /
• 2007

Nano manipulator is used to manufacture Carbon NanoTube(CNT) tips. Using nano manipulator operator attaches a CNT at the end of Atomic Force Microscopy(AFM) tip, which requires a master mechanic and long manufacture time. Nano manipulator is installed inside Scanning Electron Microscopy (SEM) chamber to observe the operation. This paper presents a control of horizontal axis of nano manipulator via processing SEM image. Edges of AFM tip and CNT are first detected, the position information so obtained is fed to control horizontal axis of nano manipulator. To be specific, visual servoing loop was realized to control the axis more precisely.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.677-681
• /
• 2011

수직축 및 수평축 풍력터빈의 특성 및 공력성능예측 방법에 대해 고찰하였다. Darrieus형 수직축 풍력터빈은 블레이드에 유입되는 바람의 속도 및 받음각의 변화가 매우 심해 Dynamic Stall 현상이 발생하고 앞면에서 발생한 Wake가 후면 블레이드의 공력특성에 영향을 준다. 수평축은 BEMT를 활용하여 형상설계 및 성능예측이 가능하고 전산해석 및 풍동시험을 통해 공력성능예측이 수행되고 있다.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.641-652
• /
• 2004

철골 기둥-보 강축 접합부에 대한 연구는 그 동안 국내외에서 오랜 기간 연구가 진행되어 내진성능 및 접합부의 강도를 개선시킬 수 있는 많은 접합 형식이 개발되어 사용 중에 있으나, 약축 접합 형식에 대한 연구는 거의 없는 실정이다. 또한 현재 국내에서는 시공성을 고려하여 기존의 브라켓형식 용접 접합부를 선호하고 있으나, 용접량이 많아 취성적인 거동이 우려되며 과대 설계된 경향이 있다. 본 연구의 실험 결과에서 기존 브라켓 형식 용접접합은 용접량이 과도한 것으로 나타났으며, 기둥 웨브와 보의 웨브의 용접은 불필요한 것으로 판단된다. 그리고 본 연구에서 제안한 새로운 기둥-보 약축 접합형식들에 대한 실험 결과에서 기존 브라켓형식 용접접합보다 우수한 내력 및 연성을 보유하여 구조적으로 안전함을 확인할 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제22권4호
• /
• pp.15-23
• /
• 2021

마이크로파일의 활용증가로 수행되었던 마이크로파일의 관련연구를 통해 다양한 마이크로파일이 개발되어왔다. 개발되고 있는 마이크로파일 공법들 중 최근 수평지지력(내진저항력)의 증가를 위한 목적으로 개발된 삼축 마이크로파일(Triaxial micropile, TMP)이 대표적이라 할 수 있다. 삼축 마이크로파일은 각축에 경사지게 설치된 3개의 마이크로파일이 수평하중에 저항하므로 좀 더 효과적으로 수평하중에 저항할 수 있는 공법의 장점이 있다. 그러나 삼축 마이크로파일에 대한 지지특성에 대한 연구가 부족하여 이 파일공법을 효과적으로 활용하는데 문제가 있다. 즉, 삼축 마이크로파일(TMP)의 효과적인 활용을 위해서는 파일의 수평지 지력에 영향을 주는 요인에 대한 지지력 평가가 요구된다. 이에 본 연구에서는 하중 방향별 현장수평재하시험을 수행하고 3차원 유한요소해석을 통해 현장 재하시험을 검증하고 거동 특성을 고찰하였으며, 수평하중의 방향을 고려한 적정한 수평지지력을 분석하였다.

• 성인간호학회지
• /
• 제12권4호
• /
• pp.517-532
• /
• 2000

The purpose of this study was to develop a critical pathway for case management of patients who have received Lumbar Laminectomy because of low back pain, arm and leg numbness, and radiating pain in the leg. For this study, a preliminary critical pathway was developed through a review of the literature including five critical pathways which are currently being used in the USA. In order to identify the overall service contents required by these patients, 30 cases were analyzed. These cases were taken from medical records of those with Lumbar Laminectomy between January, 1998 and December, 1998 in the department of neurosurgery at the Pusan National University Hospital in Pusan. An expert validity test was done for the preliminary critical pathway, a clinical validity test was also done using 12 patients with Lumbar Laminectomy between October 1, 1999 and January 31, 2000. After these processes, the final critical pathway was developed. The results are summarized as follows. 1. The vertical axis of the critical pathway includes the following eight items: assessment, consultation, diet, test, medication, treatment, activity, education/ discharge planning. The horizontal axis includes the time from the start of hospitalization to discharge. Analysis of the 30 medical records was done. analysis of the service contents showed the horizontal axis of the preliminary critical pathway was set from hospitalization to the 12th post operation day and the vertical axis was set to include eight items, the contents which should have occurred, according to the time frames of the horizontal axis. 2. As a result of the expert validity test, it was found that among the 233 items, 203 showed over 88% agreement and 30 of them showed less than 88% agreement, which were then revised or deleted from the critical pathway. At the preliminary meeting for the clinical validity test, the time of hospitalization on the horizontal axis was shortened to the 10th post operation day. A clinical validity test was done with 12 patients with Lumbar Laminectomy. All the cases progressed according to the critical pathway although some variances were noted in assessment, consultation, test, medication, and treatment. 3. Based on these results, a final critical pathway was determined. In conclusion, this critical pathway is partially applicable to the care of patients with Lumbar Laminectomy and needs further investigation.

• 지역사회간호학회지
• /
• 제12권2호
• /
• pp.329-337
• /
• 2001

Purpose: This study was to develop a critical pathway for COPD clients in home health care. Method: Review of literature. Analysis of 10 cases of home health records of COPD clients without other major chronic illness, and Contents validity test Results 1. Vertical axis(l4 activities) physical and mental assessment, family assessment. environment assessment, rights and duties of client, oxygen use and safety, education of disease process and symptom, medication, nutrition and elimination, tests, activities, respiratory exercise, sleeping pattern. consultations and discharge planning. 2. Horizontal axis was set by the number of visits(average number of visits is 6.4) and vertical axis was set with 14 activities and the contents which should have occurred, according to the time frames of the horizontal axis. 3. According to the contents validity test, among the total of 234 items, 176 items showed over 83% agreement and 58 items showed less than 83% agreement. Those items with less than 83% agreements were either deleted or revised. Conclusion this critical pathway is applicable to the home health care of COPD clients to provide quality home nursing care services at lower cost.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권3호
• /
• pp.152-159
• /
• 2017

Objectives: The aim of this study was to investigate the effects of advancement magnitude and changes in mandibular plane angle on the stability of mandibular advancement. Materials and Methods: This retrospective cohort study evaluated the postoperative stability of mandibular advancement in class II skeletal subjects who underwent bilateral sagittal split osteotomy. Radiographs taken preoperatively, immediately postoperatively and 1 year postoperatively were traced and analyzed using linear and angular measurements. To determine horizontal and vertical relapse, an X-Y coordinate system was established in which the X-axis was constructed by rotating S-N downward by $7^{\circ}$ (approximation of the Frankfort horizontal plane) and the Y-axis was defined as a line perpendicular to the X-axis and passing through the point Sella. For certain reference points including point A, point B, pogonion and menton, the perpendicular distance between each point and both axes was determined and cephalometric variables were recorded as X and Y coordinates. Results: Twenty-five subjects were studied. A significant correlation between the amount of mandibular advancement and relapse in the B point (vertical and horizontal) and the pogonion point was observed (vertical and horizontal, P<0.001). Evaluation of data demonstrated a positive correlation between the mandibular plane angle (SN/ML) change and vertical relapse in the B point (P<0.05). A simple regression model demonstrated that 74% of horizontal relapse and 42.3% of vertical relapse in the B point was related to the amount of mandibular advancement. The receiver operating characteristic test showed that 8.5 mm mandibular advancement is related to a relapse rate of 1 mm or more in the pogonion, vertically or horizontally. Conclusion: The magnitude of mandibular advancement is a stronger surgical predictor for horizontal rather than vertical relapse at the B point. Changes in mandibular plane angle (SN/ML) during surgery affect vertical, but not horizontal relapse at the B point.