• 소음진동
• /
• 제7권6호
• /
• pp.881-887
• /
• 1997

우리가 일상생활에서 사용하는 가전제품 중에서 소음 진동이 발생하여 생활에 영향을 미치는 제품으로 세탁기를 들 수 있다. 세탁기의 종류는 회전하는 축의 방향에 의해 수직축(vertical axis)과 수평축 (horizontal axis) 방식으로 나누며 국내, 일본및 동남아시아 등에서 사용하는 펄세이터식(pulsator type) 세탁기와 미국을 비롯한 미주에서 사용하는 애지테이터식(agitator type)세탁기는 전자에 속하고 유럽에서 사용하는 드럼식(drum type) 세탁기는 후자에 속한다. 드럼 세탁기의 장점은 물을 적게 사용하고, 삶는 세탁이 가능하며, 건조 기능을 갖고 있으므로 별도의 건조기가 필요없어서 공간을 절약하는 것이다. 또 빨래가 펄세이터나 애지테이터 등의 교반체와 직접 접촉하지 않기 때문에 빨래의 마모가 적다. 드럼식 세탁기의 단점으로는 가격이 펄세이터식이나 애지테이터식에 비해서 비싸고, 무게가 무거우며, 탈수시에 소음과 진동이 심하다. 특히 탈수시 발생하는 소음과 진동은 이방식의 세탁기의 가장 큰 약점이다. 지금까지는 드럼식 세탁기의 진동 소음을 감소시키려는 적극적인 노력이 없었는데, 볼밸런스를 적용한 드럽 세탁기를 개발하여 소음과 진동을 획기적으로 감소시켰다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.620-623
• /
• 2009

여러 해양에너지 중 유체의 빠른 흐름을 이용하는 조류발전은 서해안과 남해안에 적용하기에 적합하며 해양환경의 영향을 최소화 하면서 많은 에너지를 연속적으로 생산할 수 있는 장점이 있다. 조류발전에서 1차적으로 에너지를 변환시키는 로터는 조류발전시스템의 주요한 장치중의 하나로 여러 변수에 의해 그 성능이 결정된다. 블래이드 수, 형상, 단면적, 허브, 직경 등 여러 요소를 고려하여 로터를 설계하며, 설계정보와 실험데이터를 바탕으로 수치모델을 구현하여 실험에서 직접 계측할 수 없는 로터 주변의 유체현상 및 간섭영향 등을 예측할 수 있다. 본 논문에서는 변화하는 유속에 따른 HAT 로터의 시동속도, 회전수를 측정하여 로터 형상과 허브-직경비가 다른 로터의 성능을 고찰하고, 이를 수치모델로 구현하여 로터주변 유동변화를 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.431-433
• /
• 2006

The goal of this paper is improvement of vision inspection accuracy by using histogram specification operation. The histogram is composed of horizontal axis of image intensity value and vertical axis of pixel number in image. In appearance vision inspection, the histogram of reference image and input image are different because of minutely lighting distinction. The minutely lighting distinction is main reason of vision inspection error in many cases. Therefore we made an effort for elevation of vision inspection accuracy by making the identical histogram of reference image and input image. As a result of this area separation histogram specification algorithm, we could increase the exactness of vision inspection and prevent system error from physical and spirit condition of human. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• 신재생에너지
• /
• 제2권3호
• /
• pp.23-30
• /
• 2006

Need developments of substitute energy to solve problem of global warming by excess use of fossil energy, excess discharge of carbon dioxide. wind power generation system is all-important energy in next generation as clean energy. Environmental pollution of wind power generation system is not exhausted entirely. And, electric-power generation system cost is cheap than other energy. Wind Generation system that is supplied much present is most horizontality style blade structure. But, Horizontal style structure is serious noise and there is problem in stability of blade. We designed special blade solve to this problem. And, manufactured vertical axis wind power generation system because using blade. Also, developed assistance power generator to increase driving efficiency ago wind power generation. We expect this devices that is such cover shortcoming of wind power generation system.

• Ocean Systems Engineering
• /
• 제8권2호
• /
• pp.119-166
• /
• 2018

The assessment of the potential for the design of marine renewable energy systems is reviewed and the current situation for marine renewable energy is promising. The most studied forms of marine renewable energy are ocean wind energy, ocean wave energy and tidal energy. Wind turbine generators include mostly horizontal axis type and vertical axis type. But also more exotic ideas such as a kite design. Wave energy devices consist of designs converting wave oscillations in electric power via a power take off equipment. Such equipment can take multiple forms to be more efficient. Nevertheless, the technology alone cannot be the only step towards marine renewable energy. Many other steps must be overcome: policy, environment, manpower as well as consumption habits. After reviewing the current conditions of marine renewable energy development, the authors analyzed the key factors for developing a strong marine renewable energy industry and pointed out the huge potential of marine renewable energy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.79-80
• /
• 2015

This paper deal with the structure and the operating characteristics of the two-dimensional elevator system and the concept that supports to the circuit design for the driving control of the LIM in the simplest possible way. The Horizontal Axis, The Vertical Axis, that is to say, designed a motor that can move between two dimensions by using two of LIMs, especially this control system was described by a sequence control design drawing. The body of this paper has shown the characteristics and validity of this control design system and also analyzed how to apply operating characteristics of the LIM in the elevator industry.

• 한국의류학회지
• /
• 제27권9_10호
• /
• pp.1026-1035
• /
• 2003

The purposes of this study were to analyze the new lifestyle of female consumer of age in the range of 19∼35 and to investigate their clothing-purchasing behavior and preferred sensation by lifestyle group. The questionnaire survey was carried out on 402 subjects with 31 lifestyle questions, 32 questions of clothing purchasing behavior and 18 questions of preferred sensation. Through factor, cluster analysis and anova using SPSS, we found that the female consumers were composed of 6 lifestyle groups; Traditional Appearance Pursuit(19.4%), Personal Life Pursuit(15.7%), Outer Beauty Pursuit(15.9％), Active Practical Pursuit(11.4%), Digital Leisure Pursuit(13.4%) and Unconcern(21.6%). The location of 6 lifestyle group were visualized in 2-D as the horizontal axis of 'Internal↔Appearance' and the vertical axis of 'Personal↔Collective'. Six groups by lifestyle showed different clothing-purchasing behavior and preferred sensations, and had different socio statistical parameters, such as age, income, job and education.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.11-16
• /
• 2002

The differential equations governing free vibrations of the elastic, horizontally curved beams with unsymmetric axis are derived in Cartesian coordinates rather than in polar coordinates, in which the effect of torsional inertia is included. Frequencies are computed numerically for the sinusoidal curved beams with both clamped ends and both hinged ends. Comparisons of natural frequencies between this study and SAP 2000 are made to validate theories and numerical methods developed herein. The convergent efficiency is highly improved under the newly derived differential equations in Cartesian coordinates. The lowest four natural frequency parameters are reported, with and without torsional inertia, as functions of three non-dimensional system parameters: the horizontal rise to chord length ratio, the span length to chord length ratio, and the slenderness ratio.

• 치과방사선
• /
• 제7권1호
• /
• pp.27-30
• /
• 1977

To insure accuracy in dental roentgenographs, it is important that the patient's head position and angulation of the x-ray tube. In 1907 Cieszynski applied the rule of isometry to dental radiography and established that in the production of an accurate image of a tooth, the central ray must be porjected perpendicularly to a plane bisecting angle formed by the longitudinal axis of the tooth and the film plane. Proper exposure of the film is a part of the production of a good dental radiograph, and correct processing also makes an essential contribution to the quality of the radiograph. The author analysed the failure of exposure and processing results, and recommended followings. 1. The patient head must be positioned that occlusal plane are parallel with the horizontal floor. 2. Central ray must be projected to the objective tooth and supporting structure and projected as perpendicularly to tooth axis and film surface as possible. 3. In processing, the temperature of the solution and the processing time must be correct.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.187-190
• /
• 2000

Cyclocopter is air vehicle to vertically take-off and land like a helicopter. This is an efficient and quiet means of being able to direct thrust compared to a helicopter. The rotor consists of several blades rotating about a horizontal axis perpendicular to the direction of normal flight. The direction of blade span is parallel to rotating axis and both end roots are connected to the hub to resist centrifugal force and to transmit the power. The pitch of the individual blades to the tangent of the circle of the blade's path is varied cyclically to gain thrust. In the paper, the design and manufactures of cyclocopter rotor blades are presented. Stress at the roots of cyclocopter blades is great due to centrifugal and aerodynamic forces and aeroelastic instabilities appear. The blades consist of main spar, front spar, polyurethan foam, weight, and skin and spars and skin are made of glass/epoxy composite.