• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.396-403
• /
• 1996

In this paper, the (S $r_{0.85}$.C $a_{0.15}$)Ti $O_{3}$ of paraelectric grain boundary layer (GBL) ceramics were fabricated, and the analysis of microstructuye and the thermally stimulated current(TSC) were investigated for understanding effects of GBL's interfacial phenomenon on variations of electrical properties. As a result, the three peaks of .alpha., .alpha. and .betha. were obtained at the temperature of -20 [.deg. C], 20[.deg. C] and 80[.deg. C], respectively. The origins of these peaks are that the .alpha. peak observed at -20[.deg. C] looks like to be ascribed to the ionization excitation from donor level in the grain, and the .alpha.' peak observed at 20[.deg. C] appears to show up by detrap of the trapped carrier of border between the oxidation layer and the grain, and the .betha. peak observed at 80[.deg. C] seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase. and second phase.

• 한국재료학회지
• /
• 제20권5호
• /
• pp.271-277
• /
• 2010

In this paper two aspects of the percolation and conductivity of carbon black-filled polyethylene matrix composites will be discussed. Firstly, the percolation behavior, the critical exponent of conductivity of these composites, are discussed based on studying the whole change of resistivity, the relationship between frequency and relative permittivity or ac conductivity. There are two transitions of resistivity for carbon black filling. Below the first transition, resistivity shows an ohmic behavior and its value is almost the same as that of the matrix. Between the first and second transition, the change in resistivity is very sharp, and a non-ohmic electric field dependence of current has been observed. Secondly, the electrical conduction property of the carbon black-filled polyethylene matrix composites below the percolation threshold is discussed with the hopping conduction model. This study investigates the electrical conduction property of the composites below the percolation threshold based on the frequency dependence of conductivity in the range of 20 Hz to 1 MHz. There are two components for the observed ac loss current. One is independent of frequency that becomes prevalent in low frequencies just below the percolation threshold and under a high electrical field. The other is proportional to the frequency of the applied ac voltage in high frequencies and its origin is not clear. These results support the conclusion that the electrical conduction mechanism below the percolation threshold is tunneling.

• 한국안광학회지
• /
• 제6권2호
• /
• pp.23-29
• /
• 2001

SP-계열에서도 PbO가 증가할수록 액적의 형성이 잘 되었으나, 농도가 낮은 SP-1 시료에서는 액적을 관찰할 수 없었다. 이와 같은 현상은 PbO가 망목 수식제 역할을 하여 $SiO_2$에 의한 가교가 붕괴되어 유리화에 장애를 준 것으로 생각한다. 그러나 50 mol% 이상의 PbO를 포함한 유리에서는 $Pb^{4+}$ 이온이 망목 형성제 역할을 하기 때문에 유리화가 가능하다. SP-계열 유리의 주파수에 대한 전기전도도를 해석한 결과 고온에서 전기전도는 bipolaron에 의한 것이며, 저온에서 전기전도는 single polaron hopping에 의한 것으로 생각한다. SP-계열과 BP-계열 유리에서 전기전도기구는 유리질의 무질서와 관련되는 장벽 호핑(CBH) 모델과 잘 일치하였다.

• Bulletin of the Korean Chemical Society
• /
• 제11권5호
• /
• pp.371-376
• /
• 1990

Polyaniline perchlorate (PAP) was synthesized by the chemical oxidation of aniline using ferric perchlorate as a strong oxidant. The electrical conductivity of PAP was measured at temperatures from - 170 to 25$^{\circ}C$. It is suggested from the conductivity measurements that the conduction mechanism for PAP is a polaron hopping conduction. From the dependence of resistivity on the reciprocal temperature, the activation energy was computed to be 0.072 eV. From the comparison of the ESR parameterks and conductivity at 25$^{\circ}C$ for the polyaniline-based conducting polymers, the conductivities of PAP, PATFB and PATS increase with increasing ${\Delta}H_{pp}$, decreasing A/B ratio and decreasing g-value, respectively. It is shown by TGA results for PAP, PATFB and PATS that the maximum weight loss rates (Pr) are 0.185 (at 269$^{\circ}C$ ), 0.366 (at 324$^{\circ}C$) and 0.23 mg/min (at 338$^{\circ}C$), respectively.

• 대한화학회지
• /
• 제49권6호
• /
• pp.560-566
• /
• 2005

순수한 또는 미량의 구리(몰 퍼센트(0.0$Na_{1.9}Li_{0.1}Ti_{3-X}Cu_XO_{7-X}$) 물질을 합성하였다. 상온에서 모든 구리 혼입 유도체와 다양한 낮은 온도에서 0.05몰 퍼센트 Cu 혼입 유도체의 EPR 특성을 조사하였다. 격자 안의 $Ti^{4+}$자리에 $Cu^{2+}$가 치환됨으로 인한 TiO6 팔면체의 찌그러짐이 나타났다. 또한, log(${\sigma}_{d.c.}T$) 대 1000/T 그래프를 통하여 세개의 특징적인 영역이 관찰되어진다. 가장 낮은 온도 영역은 모든 구리 혼입 유도체의 polaron 과 Li이 치환된 $Na_2Ti_3O_7$의 이온 전도도에 기인한다. 중간 온도영역의 전도 메커니즘은 관련된 층간의 이온 전도도에 기인하며 가장 높은 온도 영역에서는 변형된 층간 이온 전도도에 기인한다.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.604-609
• /
• 2014

The thermoelectric power and dc conductivity of $La_{2/3+x}TiO_{3-{\delta}}$ (x = 0, 0.13) were investigated. The thermoelectric power was negative between 80K and 300K. The measured thermoelectric power of x = 0.13 increased linearly with increased temperatures and was represented by $S_0+BT$. The x = 0 sample exhibited insulating behavior, while the x = 0.13 sample showed metallic behavior. The electric resistivity of x = 0.13 had a linear temperature dependence at high temperatures and a T3/2 dependence below about 100K. On the other hand, the electric resistivity of x = 0 has a linear relation between $ln{\rho}/T$ and 1/T in the range of 200 to 300K, and the activation energy for small polaron hopping was 0.23 eV. The temperature dependence of thermoelectric power and the resistivity of x = 0 suggests that the charge carriers responsible for conduction are strongly localized. This temperature dependence indicates that the charge carrier (x = 0) is an adiabatic small polaron. These experimental results are interpreted in terms of spin (x = 0.13) and small polaron (x = 0) hopping of almost localized Ti 3d electrons.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.95-97
• /
• 2003

This paper describes electrical properties such as electrical conduction characteristics and space charge distributions of polyaniline/polystyrene conducting blends. It is interesting to note that the charging current decreased as the temperature was elevated when DC voltage was applied, and also the hopping distance decreased with the increase of temperature for the PANI/HIPS blends, while generally, the hopping distance decreases as the charging current increases. It is exposed that this result is opposed to widely known phenomenon. It could be examined viewing space charge distributions by a pulsed electroacoustic (PEA) method.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.843-847
• /
• 1999

The dc resistivity dc magnetization and thermopower of layered perovskite La1.6Ca1.4Mn2O7.07 have been studied. The ceramic sample of La1.6Ca1.4Mn2O7.07 undergoes the metal-insulator transition at 120K while a first-order phase transition from a ferromagnetic phase to a paramagnetic phae is observed at 260 K=TC This behavior is quite different from that of the well-known double exchange ferromagnets such as La1-xCaxMnO3 This phenomenon could be understood by considering the effects of the anisotropic double exchange interaction caused by two dimensional Mn-O-Mn networks in this materials. The dc magnetization between 120K and 250K is nearly constant and decreases rapidly with increasing temperature above 250K The measurements of dc resistivity and thermopower indicate that Zener polaron hopping conduction takes place above 260 K.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.645-652
• /
• 1996

The ionic conductivity of NASICON (Na Super Ionic Conductor) solid electrolyte was simulated by using Monte Carlo Method (MCM)based on a hopping model. We assumed that the conduction path of Na ions is Na1→mid-Na→Na2 where the mid-Na sites are shallow potential sites to induce 'a breathing-like movement' of Na ions in the NASICON framework. The minimum of charge correlation factor Fc and the maximum of appeared at nearby x=2.0 The occupancy of mid-Na site affected the depth of potential barrier and the conduc-tivity of the NASICON. At above x=0.3 ln σT vs. 1/T* plots have been shown Arrhenius behavior but in (VWfc)vs. 1/T* have been shown the Arrhenius type tendency at x=1 MCM results accorded with the experi-mental procedure. The role of mid-Na on Na+ ion conduction could be explained by an additional driving force and a breating-like movement model for motions of Na+ ions in the NASICON framework. As we couldn't clearly remarked the model which is the better it seems reasonable to conclude that these hypothesies are suitable to explain the FIC behavior at NASICON.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권9호
• /
• pp.502-509
• /
• 2000

In this paper in order to evaluat quantitavely the formation mechanism of space charge and its effects on the conduction characteristics in LDPE we have carried out the numerical analysis on the basis of experimental results of space charge distribution cathode field and current with time which had been simultaneously measured at applied field of 50kV/mm and room temperature. As the models for numerical analysis we employ the Richarson-Schottky theory for charge injection from electrode into LDPE and the band-tail conduction at crystalline regions and the hopping conduction by traps which mainly exist at the interface regions of crystalline-amorphous region for charge transport in LDPE. Futhermore in order to investigate the influence of physical parameters on the time characteristcs of space charge distribution and measured current we have changed the values of trap density activation energies for charge injection and transport and have analyzed their effects.